The WIKA S-10 Pressure Transmitter, 0 to 100 psi (68447-08) is an industrial pressure transmitter with a 0 to 100 psi measuring range, 4 to 20 mA output and ±0.25% BFSL accuracy. This configuration features a 1/2 in NPT(M) process connection, DIN 43650 4-pin electrical connection and stainless-steel wetted parts and housing.
Key Features
- 0 to 100 psi pressure range for gauge-pressure measurement in industrial systems
- 4 to 20 mA analogue output for integration with common process and control systems
- ±0.25% BFSL accuracy for precise pressure measurement
- 1/2 in NPT male process connection for threaded installation into compatible systems
- DIN 43650 4-pin electrical connection provides a standard industrial interface
- 10 to 30 VDC power requirement supports typical industrial control-system supplies
- IP65 enclosure protection with the specified electrical connector configuration
- 316 stainless-steel wetted parts provide durable media-contact surfaces
- 316 stainless-steel housing supports rugged industrial use
- Medium temperature range from -30 to +100 °C accommodates a broad range of process conditions
- Resistance to pressure spikes and vibration supports demanding industrial operating environments
Note: The WIKA S-10 has been listed as phase-out by the manufacturer. Contact John Morris Group to confirm current availability or to discuss suitable replacement models.
Benefits
- Integrate pressure measurements directly into control and monitoring systems using the industry-standard 4 to 20 mA signal.
- Support hydraulic, pneumatic, pump and compressor applications with a rugged stainless-steel transmitter design.
- Maintain reliable measurements in installations exposed to vibration and pressure fluctuations.
- Use the broad process temperature capability across diverse industrial measurement environments.
- Connect readily to compatible process equipment through the 1/2 in NPT male pressure port.
Why Choose the WIKA S-10 Pressure Transmitter, 0 to 100 psi (68447-08)?
The WIKA S-10 combines a 0 to 100 psi measuring range with 4 to 20 mA output, stainless-steel construction and an industrial DIN electrical connection for process-pressure monitoring. John Morris Group can assist with availability of this phase-out model and selection of an appropriate WIKA replacement where required.
