Masterflex L/S Precision Modular Washdown Drive w/ Remote; 600 rpm_1098920
Representative image only

Masterflex L/S Precision Modular Washdown Drive w/ Remote; 600 rpm

$9,124.50

The price is inclusive of GST
Control typeDigital Variable Speed
Controller Height (InchShort)4.75
Controller Height (mm)119
Controller IP ratingIP 66
Controller Length (InchShort)10.1562
Controller Length (mm)285
Controller Width (InchShort)11
Controller Width (mm)279
DescriptionL/S Precision Modular Washdown Drive w/ Remote; 600 rpm
Drive Height (InchShort)
Drive Height (mm)
Drive IP ratingIP 66
Drive Length (InchShort)
Drive Length (mm)
Drive Width (InchShort)
Drive Width (mm)
Housing MaterialPainted Aluminum Controller; Painted Steel and Aluminum Drive
Max Flow Rate (mLmin)3400
Max RPM (rpm)600
Min Flow Rate (mLmin)0.36
Min RPM (rpm)6
Motor (watts)75
Motor Height (InchShort)6.5
Motor Height (mm)165
Motor hp1/10
Motor IP ratingIP 66
Motor Length (InchShort)14.25
Motor Length (mm)362
Motor Width (InchShort)7
Motor Width (mm)178
No. of Pump heads accepted2
Open-Head SensorNo
Power (Amps)2.2
Power (Hz)50/60
Power (VAC)90 to 260
Pump SeriesL/S
Remote I/O4 to 20 mA, 0 to 10 V, start/stop and direction via contact closure
Reversible motorYes
SpeedVariable
Speed Control0.25%
Type of Pump heads acceptedL/S Standard, Easy-Load, Easy-Load II, Easy-Load 3, High-Performance, Cartridge, Multichannel, PTFE-Tubing, PTFE-Diaphragm
Washdown capableYes
Instruction Manual
Data Sheet
View Virtual Catalog - English - gy44-0713.pdf
Overview
  • Modular drives let you place motor and controller where convenient – ideal for limited or awkward spaces
  • Flow rate 0.06 to 3400 mL/min (depends on drive rpm and tubing size)
  • Three-digit LED display shows motor rpm—confirm speed setting at a glance
  • Membrane keypad for easy up-front control of speed, direction, and start/stop
  • Reversible motor; purge tubing before or after pumping; pump fluid in either direction
  • LED indicators confirm motor direction
  • Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications
  • Separate speed and power (on/off) control; maintain speed setting while turning pump on/off
  • ±0.25% speed control; meter and transfer fluids with accuracy and repeatability
  • Remote control capabilities via weather-resistant connector on controller: Speed control input 4 to 20 mA or 0 to 10 V; Pump direction (CW/CCW) via open collector or contact closure; Start/stop via open collector or contact closure
  • Washdown powder-coated aluminum controller housing is NEMA 4X (IP66) rated; drive housing is powder-coated steel, NEMA 4X (IP66) rated
  • 6-ft (1.8-m) cable connects drive and controller; use optional extension cable 07557-51 to extend to 15 ft (4.6 m)

L/S® modular drives feature reversible pumping and allow you the flexibility to separate the motor from the controller. These accurate modular drives have powerful motors, speed display, and ±0.25% speed control for precise flow regulation—ideal for metering applications

Whats Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

Over 40,000 Customers Trust John Morris