- Modular drives let you place motor and controller where convenient – ideal for limited or awkward spaces
- Flow rate 0.06 to 3400 mL/min (depends on drive rpm and tubing size)
- Three-digit LED display shows motor rpm—confirm speed setting at a glance
- Membrane keypad for easy up-front control of speed, direction, and start/stop
- Reversible motor; purge tubing before or after pumping; pump fluid in either direction
- LED indicators confirm motor direction
- Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications
- Separate speed and power (on/off) control; maintain speed setting while turning pump on/off
- ±0.25% speed control; meter and transfer fluids with accuracy and repeatability
- Remote control capabilities via weather-resistant connector on controller: Speed control input 4 to 20 mA or 0 to 10 V; Pump direction (CW/CCW) via open collector or contact closure; Start/stop via open collector or contact closure
- Washdown powder-coated aluminum controller housing is NEMA 4X (IP66) rated; drive housing is powder-coated steel, NEMA 4X (IP66) rated
- 6-ft (1.8-m) cable connects drive and controller; use optional extension cable 07557-51 to extend to 15 ft (4.6 m)
L/S® modular drives feature reversible pumping and allow you the flexibility to separate the motor from the controller. These accurate modular drives have powerful motors, speed display, and ±0.25% speed control for precise flow regulation—ideal for metering applications
Whats Included:
6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.