CARTRIDGE L/S LARGE<span class='hding1'>_1098541
Representative image only

CARTRIDGE L/S LARGE

$425.70

The price is inclusive of GST
DescriptionL/S large cartridges for 07519-05 and -06 pump heads.
Height (InchShort)3.75
Height (mm)95
Housing MaterialPolycarbonate and Glass-filled Nylon
Length (InchShort)4.3125
Length (mm)125
Max Flow Rate (mLmin)1700
Max Flow Rate Per Channel (mLmin)1700
Min Flow Rate (mLmin)0.004
Min Flow Rate Per Channel (mLmin)0.004
Number of Channels1
OcclusionAdjustable
Open-Head SensorNo
Optimum rpm range (rpm)0.02 to 600
Pump SeriesL/S
Tubing RetentionManual
Tubing sizes acceptedL/S® 14, L/S 16, L/S 25, L/S 17
Volume Per Revolution With L/S 14 Tubing (mL)0.21
Volume Per Revolution With L/S 16 Tubing (mL)0.6
Volume Per Revolution With L/S 17 Tubing (mL)2.3
Volume Per Revolution With L/S 25 Tubing (mL)1.4
Width (InchShort)0.75
Width (mm)19
Instruction Manual
View Virtual Catalog - English - gy44-0694.pdf
Overview
  • Use with L/S® multichannel cartridge pump heads for synchronous, multichannel pumping

Cartridges feature accurate flow rates and adjustable tubing retainers to hold tubing in place — for large cartridges, set tubing retainers to your tube size and you are ready to pump. On small cartridges, optimum retention is preset — simply load tubing and start pumping. Each cartridge accepts microbore and/or L/S® precision pump tubing, please refer to table below.
All cartridges have adjustable occlusion which maintains a bi-directional flow variation of ±5%. Tighten occlusion for higher pressures, loosen for longer tubing life. Combine the input/output of two cartridges to reduce pulsation.
Cartridges are constructed from polycarbonate and glass-filled nylon. Mix small and large cartridges on pump heads that accept both sizes; two small cartridges occupy the same space as one large cartridge. Only Silicone and C-Flex® tubing formulations are recommended for size L/S® 17 tubing when used in L/S® cartridge pump heads.

Over 40,000 Customers Trust John Morris