Masterflex I/P® Brushless Process Drive, 33 to 650 rpm; 115/230 VAC_1180033
Representative image only

Masterflex I/P® Brushless Process Drive, 33 to 650 rpm; 115/230 VAC

Control typeDigital Variable Speed
DescriptionI/P Precision Brushless Drive, 33 to 650 rpm, 115/230 VAC
Drive Height (InchShort)9
Drive Height (mm)229
Drive IP ratingIP 55
Drive Length (InchShort)14
Drive Length (mm)350
Drive Width (InchShort)10
Drive Width (mm)254
Housing MaterialPainted Steel and Aluminum
Max flow rate (LPM)26
Max Flow Rate (mLmin)26000
Max RPM (rpm)650
Min flow rate (LPM)0.2
Min Flow Rate (mLmin)200
Min RPM (rpm)33
Motor (watts)250
Motor hp1/3
No. of Pump heads accepted2
Open-Head SensorNo
Power (Amps)4.5
Power (Hz)50/60
Power (VAC)90 to 260
Pump SeriesI/P
Reversible motorYes
SpeedVariable
Speed Control±0.25%
Type of Pump heads acceptedI/P Standard, I/P Easy-Load, I/P High-Performance
Instruction Manual
View Virtual Catalog - English - gy44-0734.pdf
Overview
  • Powerful, low-maintenance drives are versatile and cost-effective
  • Flow range: 0.2 to 26 LPM (depends on drive rpm and tubing size; achieve 26 LPM by stacking two I/P Easy-Load® pump heads)
  • 1/3-hp brushless motor handles challenging applications with minimal maintenance
  • Non-chip epoxy-coated, IP55-rated steel enclosure protects against moisture, chemicals, and dust
  • Compact drives are light enough to carry with one hand, but powerful enough to drive two pump heads
  • Flow: 0.2 to 19 LPM (0.06 to 5.0 GPM); flow rate depends on motor rpm and tubing size.
  • Speed control via three-turn potentiometer for quick, easy adjustments
  • Start/stop/reverse via sealed keypad
  • Digital display shows motor speed, from 5 to 100%
  • Flow: 0.2 to 19 LPM (0.06 to 5.0 GPM); flow rate depends on motor rpm and tubing size.
  • Three-turn speed control offers precision and repeatability—LED display shows percent speed with 1% resolution
  • 1/3-hp brushless motor handles challenging applications with minimal maintenance
  • Non-chip epoxy-coated, IP55-rated steel and aluminum enclosure protects against moisture, chemicals, and dust
  • Compact drives are light enough to carry with one hand, but powerful enough to drive two pump heads

I/P® brushless process drives offer heavy-duty performance for your demanding process applications. This model features robust 1⁄3-hp brushless motors that drive up to two pump heads with most tubing formulations, while eliminating the cost and inconvenience of brush replacement. Adjust the drive speed quickly using the speed control knob—speed is displayed on an easy-to-read LED display from 5 to 100% of full speed, with 1% resolution.

The IP55-rated epoxy-coated, steel enclosure provides excellent protection against chemicals, water, and dust. With a compact footprint and built-in carrying handle, these lightweight drives conserve space and allow easy portability.

Brushless drive supplies enough torque to drive two pump heads using any tubing formulations.

Whats Included:

6-ft (1.8-m) line cord with IEC320/CEE 22 connector coupler. Please specify final destination country to receive the correct plug/cord set.

Over 40,000 Customers Trust John Morris