The IDEX ETFE Chromatography Tubing, 1/16 x 0.010 in, 100 ft (1529XL, Cole-Parmer 02014-36) is high-pressure fluoropolymer tubing manufactured from genuine Teflon ETFE resin for analytical fluidic applications. This natural tubing combines a 1/16 in outside diameter and 0.010 in internal diameter with a 100 ft length, excellent solvent resistance, low gas permeability and a maximum pressure rating of 4,000 psi.
Key Features
- Genuine Teflon ETFE resin construction, providing enhanced pressure-holding capability and continuous mechanical stability
- Excellent solvent resistance, supporting compatible analytical fluid handling applications
- Low gas permeability, helping limit gas transfer through the tubing wall
- 1/16 in OD with 0.010 in ID, equivalent to a 250 µm internal fluid pathway
- 100 ft continuous length, providing a bulk tubing format for laboratory fluidic connections
- Maximum pressure rating of 4,000 psi, equivalent to 276 bar
- Continuous operating temperature up to 80 °C, providing the specified maximum temperature for this tubing configuration
- Natural colour, identifying this specific 1529XL ETFE tubing variant
Note: This product has been listed as discontinued by the manufacturer. Contact John Morris Group to confirm current availability or to discuss suitable alternatives.
Benefits
- Supports demanding analytical fluidic systems with substantially higher pressure capability than many low-pressure fluoropolymer tubing options.
- Helps minimise gas transfer through the tubing due to the low gas permeability of ETFE.
- Supports connections between a system pump and vacuum degasser where reducing mobile-phase regassing in transit is important.
- Provides strong mechanical stability and solvent resistance for compatible chromatography fluid paths.
- Supplies a 100 ft bulk length for laboratories requiring multiple or extended tubing runs.
Why Choose the IDEX ETFE Chromatography Tubing, 1/16 x 0.010 in, 100 ft (1529XL)?
The IDEX ETFE Chromatography Tubing, 1/16 x 0.010 in, 100 ft (1529XL, Cole-Parmer 02014-36) combines genuine ETFE resin, low gas permeability and excellent solvent resistance with a manufacturer-rated pressure capability of 4,000 psi. John Morris Group can assist with availability and suitable alternatives for this discontinued IDEX tubing configuration.
