Large Display Portable Stem Thermometer TL3_1206747
Representative image only

Large Display Portable Stem Thermometer TL3

$1,404.70

The price is inclusive of GST
Batteries20mm Coin Size 3V Lithium, Duracell DL2032(IEC CR2032); Over 100 hours Service Life at 70°F, 21°C; Battery Operating Range -4 to 130°F, -20 to 54°C; Note: Battery may not provide adequate power if ambient temperature is below -4°F, -20°C or above 130°F, 54°C
ConstructionGlass-Filled Nylon Enclosure with silicone buttons and a durable polyester graphics window; Nominal Body Dimensions: 5.0 x 1.7 x 0.85" (3 x 4.3 x 2.2cm)
DisplayLCD with 0.5 inch characters; Trend Indicating Arrows; Low Battery & Fault indication; Resolution 0.1 or 0.01
ElectronicsMicrocontroller and precision 20 bit A/D Converter; FLASH memory; Recommended Temperature Range For best Accuracy 32 to 112°F, 0 to 44°C
NotesSpecifications subject to change, See data sheet for latest information; Custom ranges, configurations and sensor lengths available upon request
SensorStainless Steel RTD temperature sensor; 100Ω Shock resistant Thin Film RTD; Standard 8"(20cm) or 12"(30cm) lengths; Standard 0.25"(6.35mm) diameter with 0.188" (4.76mm) reduced tip; Recommended Minimum Immersion Depth: 3" (7.6cm)
TemperatureResolution 0.01 Degrees; Calibrated Accuracy: ±0.1°F from 14 to 320°F (±0.06°C from -10 to 160°C); Range: -40°F to 400°F (-40°C to 204°C); NIST Traceable Report of Test
Temperature Response CharacteristicsTemperature Time Constant – 6.5 seconds in circulated water bath (63.2% response to temperature change); Temperature Change Stabilization – 19 seconds (0°C to 98°C +/- 0.1°C)
User FunctionsAuto Off after 20 minutes or continuous operation; Lowest Reading, Highest Reading, Average Reading; Switchable in Units of °F or °C; Display tenths or hundredths resolution
Weight5.3oz (150 grams) – with 8" sensor
Repair-Calibration-Form.pdf
TL1-A-Sample-Calibration.pdf
TL3-Specs-2018.pdf
TL3-User-Instructions-REV0.pdf
Overview

TL3

Large Display Portable Stem Thermometer

Description

The TL3 thermometer is an ergonomically advanced version of ThermoProbe’s trusted TL1-A. The TL3 incorporates a larger display and an easier to hold shape with the same specifications for high accuracy and long term stability established by the TL1-A. The TL3 is intended to be used anywhere a precision glass stem thermometer or other type thermometer is used. The TL3 is well suited as a calibration reference in the laboratory or field.

The versatile software functions allow easy selection of Celsius or Fahrenheit units and display resolution. Encoded calibration is unaffected by temperature, vibration, or battery removal. Low battery display, and failure mode indications protect the user from false data. The intuitive display indicators allow the user to establish accurate temperature readings. Minimum, maximum and average temperatures are automatically stored to memory for later reference.

The TL3 is constructed with a molded glass-filled nylon case and stainless steel temperature probe. Different from many electronic thermometers, the “Cordless” TL3 has no wires to get in the way or break. The silicone button interface makes for intuitive operation. Standard probe lengths are 8 and 12 inches with additional lengths available upon request. The TL3 comes equipped with an easily replaceable coin cell battery, providing up to 100 hours of operation.

Applications

Laboratory, Temperature, Calibration, Reference, Thermo well, Thermowell, Handheld, Metrology, NIST, Traceable, API, ASTM, Temperature bath, Dry block, Dry well, Distillation, Melting point test, Flash point test, Prover, Flow meter, Pharmaceutical, Food, Dairy, Pete’s Plug, Viscosity, Portable, Digital, Inspector, Temperature Calibrator, Precision

Over 40,000 Customers Trust John Morris