The Revvity OM500 Replaceable Tip Probe, 1/2 Inch, 12.7 mm (060-500), is a titanium ultrasonic homogeniser probe for processing sample volumes from 20 mL to 250 mL with the OM500 sonicator. Driven at its resonant frequency, the probe transmits mechanical vibration into liquid to generate cavitation for sample processing. Its replaceable-tip design allows an eroded or worn tip to be removed and replaced.
Key Features
- Medium-volume sample processing, covering volumes from 20 mL to 250 mL
- Half-inch probe diameter, measuring 12.7 mm across the processing tip
- Replaceable-tip construction, allowing worn probe tips to be removed and replaced
- Titanium probe material, machined to the size and shape required for ultrasonic operation
- Dedicated OM500 compatibility, designed for use with the Revvity OM500 sonicator
- Cavitation-based sample processing, transmitting amplified mechanical vibration through the probe into liquid
- Volume-matched probe selection, with the 12.7 mm tip diameter specified for the listed 20 mL to 250 mL range
- Single-probe supply quantity, provided as one replaceable-tip probe
Note: Probe tips can pit or erode during normal use. An excessively worn tip may affect processing results and could overload the generator. For research use only and not for use in diagnostic procedures.
Benefits
- Processes medium-volume samples using a probe diameter matched to the manufacturer-specified volume range.
- Allows the worn tip to be replaced without replacing the complete probe assembly.
- Generates cavitation in liquid for ultrasonic sample processing with the compatible OM500 sonicator.
- Supports ongoing performance by allowing eroded probe tips to be changed when required.
- Helps reduce the risk of compromised results or generator overload associated with excessive tip wear.
Why Choose the Revvity OM500 Replaceable Tip Probe, 1/2 Inch, 12.7 mm (060-500)?
The Revvity 060-500 provides a manufacturer-specified titanium probe for processing 20 mL to 250 mL samples with the OM500 sonicator. Its replaceable-tip design supports continued use by allowing worn tips to be changed as erosion occurs. John Morris Group supplies Revvity sonication equipment and compatible ultrasonic probes throughout Australia.
