The Revvity CF-260/350 16 x 5 mL Aerosol-Tight Microcentrifuge Tube Rotor (403055) is an RA 16/5 fixed-angle rotor for compatible Revvity CF-260 and CF-350 centrifuges. It accommodates up to 16 x 5.0 mL microcentrifuge tubes and includes an aerosol-tight lid for the complete rotor configuration.
Key Features
- Processes up to 16 microcentrifuge tubes, with a dedicated capacity of 16 x 5.0 mL
- Includes an aerosol-tight lid, supplied as part of the RA 16/5 rotor configuration
- Compatible with two Revvity centrifuges, supporting both CF-260 and CF-350 systems
- Reaches up to 14,000 rpm on the CF-260, generating a maximum centrifugal force of 21,470 rcf
- Reaches up to 13,000 rpm on the CF-350, generating a maximum centrifugal force of 18,520 rcf
- Accommodates tubes up to 16.5 x 75 mm, defining the maximum compatible tube dimensions
- Uses a 45° fixed-angle configuration, maintaining angled tube positioning during centrifugation
- Features a 98 mm rotor radius, matching the manufacturer-specified RA 16/5 geometry
Note: Maximum speed and centrifugal force depend on whether the rotor is installed in a CF-260 or CF-350 centrifuge. This product is for research use only and is not intended for use in diagnostic procedures.
Benefits
- Processes up to 16 larger-volume microcentrifuge tube samples in a single rotor.
- Provides one rotor option for laboratories operating compatible CF-260 and CF-350 centrifuges.
- Includes the specified aerosol-tight lid as part of the rotor assembly.
- Provides clearly defined model-specific speed and centrifugal-force limits for correct operation.
- Supports straightforward tube selection through its stated maximum tube dimensions.
Why Choose the Revvity CF-260/350 16 x 5 mL Aerosol-Tight Microcentrifuge Tube Rotor (403055)?
The Revvity 403055 provides a manufacturer-specified 16-position rotor for high-speed processing of 5.0 mL microcentrifuge tubes in compatible CF-260 and CF-350 centrifuges. Its included aerosol-tight lid, defined operating limits and dual-instrument compatibility make it a practical research centrifugation accessory, while John Morris Group can assist with confirming suitability for your centrifuge and tube format.
