Model:602D01 - Platinum Stock Product: Low profile, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.5 to 8000 Hz, side exit, 2-pin connector, single point ISO 17025 accredited calibration_1274442
Representative image only

Model:602D01 - Platinum Stock Product: Low profile, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.5 to 8000 Hz, side exit, 2-pin connector, single point ISO 17025 accredited calibration

$485.10

The price is inclusive of GST
Broadband Resolution (English)350 µg
Broadband Resolution (SI)3434 µm/sec<sup>2</sup>
Constant Current Excitation2 to 20 mA
Discharge Time Constant≥0.3 sec
Electrical Connection PositionSide
Electrical Connector2-Pin MIL-C-5015
Electrical Isolation (Case)>100000000 Ohm
Enclosure RatingIP68
Excitation Voltage18 to 28 VDC
Frequency Range (±3 dB) (English)30 to 480000 cpm
Frequency Range (±3 dB) (SI)0.5 to 8000 Hz
Housing MaterialStainless Steel
Measurement Range (English)±50 g
Measurement Range (SI)±490 m/s²
Mounting Thread (English)1/4-28 Male
Mounting Thread (SI)No Metric Equivalent
Mounting Torque (English)2 to 5 ft-lb
Mounting Torque (SI)2.7 to 6.8 Nm
Non-Linearity±1 %
Output Bias Voltage8 to 12 VDC
Output Impedance<150 Ohm
Overload Limit (Shock) (English)5000 g pk
Overload Limit (Shock) (SI)49050 m/s² pk
Resonant Frequency (English)1500 kcpm
Resonant Frequency (SI)25 kHz
SealingWelded Hermetic
Sensing ElementCeramic
Sensing GeometryShear
Sensitivity (±10 %) (English)100 mV/g
Sensitivity (±10 %) (SI)10.2 mV/(m/s²)
Settling Time (within 1% of bias)≤2.0 sec
Size - Height (English)0.845 in
Size - Height (SI)21.5 mm
Size - Length (English)1.65 in
Size - Length (SI)41.9 mm
Size - Width (English)0.74 in
Size - Width (SI)18.8 mm
Spectral Noise (1 kHz) (English)4 µg/√Hz
Spectral Noise (1 kHz) (SI)39.2 (µm/sec<sup>2</sup>)/√Hz
Spectral Noise (10 Hz) (English)8.0 µg/√Hz
Spectral Noise (10 Hz) (SI)78.5 (µm/sec<sup>2</sup>)/√Hz
Spectral Noise (100 Hz) (English)5 µg/√Hz
Spectral Noise (100 Hz) (SI)49.1 (µm/sec<sup>2</sup>)/√Hz
Temperature Range (English)-65 to +250 °F
Temperature Range (SI)-54 to +121 °C
Transverse Sensitivity≤7 %
Weight (English)2.61 oz
Weight (SI)74.0 gm
Drawing (PDF)
Product Manual (PDF)
Specifications (PDF)
Overview

Platinum Low-cost Industrial ICP® Accelerometer
Platinum Stock Products; Low profile, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.5 to 8000 Hz, side exit, 2-pin connector, single point ISO 17025 accredited calibration
IMI guarantees this item can ship immediately else shipping is free.
 

Product Specifications
  ENGLISH SI  
Performance
    Sensitivity (±10 %) 100 mV/g 10.2 mV/(m/s²) [1] 
    Measurement Range ±50 g ±490 m/s²  
    Frequency Range (±3 dB) 30 to 480000 cpm 0.5 to 8000 Hz [4] 
    Resonant Frequency 1500 kcpm 25 kHz [2] 
    Broadband Resolution 350 µg 3434 µm/sec2 [2] 
    Non-Linearity ±1 % ±1 % [3] 
    Transverse Sensitivity ≤7 % ≤7 %  
Environmental
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
    Temperature Range -65 to +250 °F -54 to +121 °C  
    Enclosure Rating IP68 IP68  
Electrical
    Settling Time (within 1% of bias) ≤2.0 sec ≤2.0 sec  
    Discharge Time Constant ≥0.3 sec ≥0.3 sec  
    Excitation Voltage 18 to 28 VDC 18 to 28 VDC  
    Constant Current Excitation 2 to 20 mA 2 to 20 mA  
    Output Impedance <150> <150>  
    Output Bias Voltage 8 to 12 VDC 8 to 12 VDC  
    Spectral Noise (10 Hz) 8.0 µg/√Hz 78.5 (µm/sec2)/√Hz [2] 
    Spectral Noise (100 Hz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [2] 
    Spectral Noise (1 kHz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [2] 
    Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
Physical
    Size - Length 1.65 in 41.9 mm  
    Size - Width 0.74 in 18.8 mm  
    Size - Height 0.845 in 21.5 mm  
    Weight 2.61 oz 74.0 gm  
    Mounting Thread 1/4-28 Male No Metric Equivalent [5] 
    Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm  
    Sensing Element Ceramic Ceramic  
    Sensing Geometry Shear Shear  
    Housing Material Stainless Steel Stainless Steel  
    Sealing Welded Hermetic Welded Hermetic  
    Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015  
    Electrical Connection Position Side Side  
 
All specifications are at room temperature unless otherwise specified.
 
CEceneleccsa_us
Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] The high frequency tolerance is accurate within ±10% of the specified frequency.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.
Accessories:
Supplied
081A97 Thru bolt 1/4-28 (1)
Optional Versions:
(EX) Hazardous Area Approval- contact factory for specific approvals
  ENGLISH SI
    Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4 Ex ia IIC T4, AExia IIC, T4
    Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 3=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 3="">
    Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 1=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 1="">
    Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4 Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
(M) Metric Mount
  ENGLISH SI
 
Accessories:
     M081A97 Captive Mounting Bolt (1)
(TO) Temperature Output
  ENGLISH SI
    Temperature Output Range +36 to +250 °F +2 to +121 °C
    Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
    Electrical Connector 3-Pin 3-Pin
    Electrical Connections (Pin A) Acceleration Output Acceleration Output
    Electrical Connections (Pin B) Ground Ground
    Electrical Connections (Pin C) Temperature Output Temperature Output

Over 40,000 Customers Trust John Morris