Pure water system OmniaTap 12 UV/UF_1232314
Pure water system OmniaTap 12 UV/UF_1232314
Pure water system OmniaTap 12 UV/UF_1232314
Representative image only

Pure water system OmniaTap 12 UV/UF

* in dependence on the feedwater quality-
** with sterilizing filter 0.2 µm-
*** with OptiFill Dispenser-
ASTM I: Bacteria** CFU/ml<0.1
ASTM I: Conductivit µS/cm0.055
ASTM I: Dispensing performance l/minup to 1.6
ASTM I: Endotoxins* EU/ml0.001
ASTM I: Particles**/ml< 1
ASTM I: Resistance MΩ x cm18.2
ASTM I: TOC-value* ppb1 – 5
ASTM II: Conductivity µS/cm0.067 – 0.1
ASTM II: Pure water performance l/h at 15 °C6 or 10
ASTM II: Pure water tank pressurized outletyes
ASTM II: Resistance MΩ x cm15 – 10
Feedwater requirements: Drinking water according to DIN 2000-
Feedwater requirements: Feedwater temperature °C+ 2 up to 35
Feedwater requirements: Free chlorine content mg/l<1
Feedwater requirements: Manganese and iron content mg/l< 0.05
Feedwater requirements: Silt density index (SDI)max. 3
Technical data: Ambient temperature °C+ 2 up to + 35
Technical data: Connected load kW0.1
Technical data: Connector size mm8 mm hose
Technical data: Dimensions*** W x H x D mm390 x 720 x 615
Technical data: Operating pressure bar1 - 6
Technical data: Supply voltage Volt/Hz90-240/50-60
Technical data: Weight kg23
Stakpure Product Brochure
Overview

OmniaTap

Der Allrounder.
For H2O pure types ASTM I + II.

OmniaTap is the ideal system when both pure water and ultrapure water are required, but in relatively small amounts. The ability to provide both types from a single system results from the combination of ultramodern purification technologies. These also make it possible to connect the system directly to a drinking water tap. A press on the dispenser button activates dispensing of ultrapure water type ASTM I via the digital dispenser control. The recirculation of the pure water held in the installed 10 litre tank keeps it permanently at type ASTM II quality. The pure water tank has a second outlet for feeding downstream end users.

Omnia Tap 6 UV / UF typical applications include molecular and microbiology, cell culture media

Features

  • OptiFill dispenser is standard
  • TapWater set for direct connection to a drinking water tap
  • 10-litre pure water tank has a pressure outlet
  • Tank volume display in percent
  • Simple and economical filter replacement
  • Leakage sensor is standard
  • Ready-to-use, including filter cartridges
One hand operation
Easy water dispensing
Flexible on a work surface

Flow Chart

Over 40,000 Customers Trust John Morris