Clear water system OmniaLab ED 40 l/h_1234873
Clear water system OmniaLab ED 40 l/h_1234873
Clear water system OmniaLab ED 40 l/h_1234873
Representative image only

Clear water system OmniaLab ED 40 l/h

* Typically 15 MΩ x cm-
** in dependence on the feedwater quality-
ASTM II: Bacteria*** CFU/ml< 1
ASTM II: Conductivity µS/cm0.1 – 1
ASTM II: Dispensing performance dispenser l/minup to 2
ASTM II: Particles***/ml< 1
ASTM II: Pure water performance l/h at 15 °C40
ASTM II: Pure water tank pressurized outletyes
ASTM II: Resistance MΩ x cm10 – 1
ASTM II: Silicate removal** %99.9
Feedwater requirements: Drinking water according to DIN 2000-
Feedwater requirements: Feedwater temperature °C+ 2 up to 35
Feedwater requirements: Free chlorine content mg/l<1
Feedwater requirements: Manganese and iron content mg/l< 0.05
Feedwater requirements: Silt density index (SDI)max. 3
optional – ASTM I: Conductivity µS/cm (with ultrapure water cartridge)0.055
optional – ASTM I: Resistance MΩ x cm (with ultrapure water cartridge)18.2
optional – ASTM I: TOC-value** ppb (with UV-unit)5 – 10
Technical data: Ambient temperature °C+ 2 up to + 35
Technical data: Connected load kW0.25
Technical data: Connector size mm8 mm hose
Technical data: Dimensions Base cabinet tank mm511 x 800 x 575
Technical data: Dimensions*** B x H x T mm511 x 1520 x 575
Technical data: Operating pressure bar2 - 6
Technical data: Supply voltage Volt/Hz90-240/50-60
Technical data: Weight kg65
Stakpure Product Brochure
Overview

OmniaLabED

The big one.
For H2O pure types ASTM I + II.

OmniaLabED is the system of choice when the complete laboratory pure water and ultrapure water requirements are to be fulfilled. The system complies with international water standards such as ASTM, ISO 3696 and CLSI. The economy of it is maximized by the inclusion of a continuously self-regenerating electrodeionizer, without having to give any demanding analytical applications a pass. Further to this, each OmniaLabED-system holds 100 litres of pure water type ASTM II ready for withdrawal in a storage tank that is equipped with quality recirculation. OmniaLabED is exactly right as pure water supplier to autoclaves and laboratory washing machines.

OmniaLab ED 40 typical applications include supply of autoclaves and laboratory dishwashers

Features

  • OptiFill dispenser is standard
  • Continuous residual salts removal by electro-deionization
  • 100 litre storage tank with recirculation and pressure outlet
  • Tank volume display in percent
  • Tank volume can be modularly increased
  • Simple, cost-effective filter replacement
  • Leakage sensor is standard
One hand operation
Easy water dispensing
Flexible on a work surface
Tank fits space-savingly under the bench-top

Flow Chart

Over 40,000 Customers Trust John Morris