Representative image only

Analogue Shore hardness tester HB Compact handheld durometer with drag indicator; Hardness type Shore D; Measuring range 100 HD Max.

Estimated Delivery: 4-6 Weeks

$451.00

The price is inclusive of GST

Typical application: measurement of penetration (Shore)
Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are often not possible because of very narrow standard tolerances
Shore A rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar material
Shore D plastics, formica, epoxides, plexiglass etc.
Shore A0: foam, sponge etc.
Max mode: Holds the maximum value in the display
Point mode: Shows one instant value
Can be attached to the test stands SAUTER TI-A0 (for Shore A and A0), TI-D. (for Shore D)
Delivered in a wooden carrying case

Typical application: measurement of penetration (Shore)
Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are often not possible because of very narrow standard tolerances
Shore A rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar material
Shore D plastics, formica, epoxides, plexiglass etc.
Shore A0: foam, sponge etc.
Max mode: Holds the maximum value in the display
Point mode: Shows one instant value
Can be attached to the test stands SAUTER TI-A0 (for Shore A and A0), TI-D. (for Shore D)
Delivered in a wooden carrying case