Masterflex L/S Variable-Speed Drive w/ Remote I/O; 300 rpm_1103179
Representative image only

Masterflex L/S Variable-Speed Drive w/ Remote I/O; 300 rpm

$5,327.30

The price is inclusive of GST
Control typeDigital Variable Speed
DescriptionL/S Variable-Speed Drive w/ Remote I/O; 300 rpm
Drive Height (InchShort)8.5
Drive Height (mm)216
Drive IP ratingIP 33
Drive Length (InchShort)10.7968
Drive Length (mm)274
Drive Width (InchShort)8.3125
Drive Width (mm)211
Housing MaterialABS Plastic and Aluminum
Max Flow Rate (mLmin)1700
Max RPM (rpm)300
Min Flow Rate (mLmin)0.18
Min RPM (rpm)3
Motor (watts)75
Motor hp1/10
No. of Pump heads accepted2
Open-Head SensorNo
Power (Amps)2.2
Power (Hz)50/60
Power (VAC)90 to 260
Pump SeriesL/S
Remote I/O4 to 20 mA, 0 to 10 V, start/stop and direction via contact closure
Reversible motorYes
SpeedVariable
Speed Control±0.25% (1 rpm at 600 and 300 rpm; 0.1 rpm at 100 rpm)
Type of Pump heads acceptedStandard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm
Instruction Manual
Literature
View Virtual Catalog - English - gy44-0710.pdf
Overview
  • Easy-to-use drives offer precise speed control and digital display of rpm—ideal for metering applications
  • Flow rate 0.06 to 3400 mL/min (depends on drive rpm and tubing size)
  • Three digit LED display shows motor rpm — confirm speed setting at a glance
  • Reversible motor—purge tubing before or after pumping; pump fluid in either direction
  • LED indicators confirm motor direction
  • Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications
  • Separate speed and power (on/off) control — maintain speed setting while turning pump on/off
  • Stackable, splash-resistant ABS plastic housing; IP33 rated
  • Remote control capabilities via a DB9 female connector on back of drive
  • Speed control input: 4 to 20 mA or 0 to 10 VDC
  • Pump direction (CW/CCW) via open collector or contact closure
  • Start/stop via open collector or contact closure
  • Membrane keypad for easy up-front control of speed, direction, and start/stop

These accurate analog console drives have powerful motors, speed display, and ±0.25% speed control for precise flow regulation—ideal for metering applications. Remote speed control requires DB9 male connector 07595-45 or cable assembly 07595-47. Use remote connector for control of start/stop via contact closure or open collector (5 V TTL); control start/stop via footswitch 77595-35 or handheld remote 07528-80.

Whats Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

Over 40,000 Customers Trust John Morris