- High-performance pump tubing for challenging applications
- Custom extruded to fit Masterflex pumps
Engineered for long life in peristaltic pump applications
Lot-to-lot consistency provides superior accuracy and repeatability
PCS-Series tubing is a patented composite of platinum-cured silicone and ePTFE
Maximum pressure up to 100 psi (6.9 bar)
Excellent flow stability
Spallation-free
Low gas permeability
Applications: Chemical and pharmaceutical applications.
Characteristics: Enhanced chemical resistance, including aggressive organic solvents. Low Spallation, low gas permeability. Opaque white.
Masterflex L/S pump tubing is manufactured to extremely close tolerances that match our L/S pump heads, ensuring accurate, repeatable flow and long tubing life. Our pump tubing is factory-tested and optically inspected to provide the best performance from your peristaltic pump. With 20 different materials available, there is an L/S pump tubing formulation suitable for nearly any fluid handling application.
Gore Sta-Pure PCS-Series Pump Tubing is your ideal choice for high purity or long-running, critical pharmaceutical and biopharmaceutical processing applications. The patented composite (platinum-cured silicone) and ePTFE (polytetrafluoroethylene), results in a tube that offers high flex durability for greater resistance to rupture—even at applications up to 100 psig. Long-term pump testing proves that Gore Sta-Pure PCS-Series Pump Tubing lasts over 1000 hours at 200 rpm, or over 6000 hours at 100 rpm. Its long life eliminates the need to rotate tubing through the pump head, saving time and reducing maintenance.
If one is looking for a flow-stable, process-stable tubing that withstands CIP (clean-in-place) or SIP (steam-in-place) cleaning—look no further than this tubing!
Gore Sta-Pure PCS-Series pump tubing is available as single tube elements. Recommended for use in L/S® and I/P® standard and Easy-Load® pump heads, and L/S® Easy-Load® II pump heads.
Flow ranges are approximate—calculated under the following conditions: 0 psig at inlet, 0.5 psig at outlet; water temperature at 72°F (22°C). Actual performance varies depending on tubing formulation—values shown below are for firm tubing.
NOTE: There is an engineering questionnaire vetting application specific details before the order can be processed.
