The Labconco 6' Purifier Cell Logic+ Class II Type B2 Biosafety Cabinet offers robust personnel, product, and environmental protection from hazardous particulates such as agents requiring Biosafety Levels 1, 2, or 3 containment. Suitable for use with antineoplastic drugs, genetic material, asbestos, and other airborne hazards, this cabinet meets NSF compliance standards to ensure safe and reliable operation in demanding laboratory settings.
Product Features
- Electronically Commutated Motor (ECM) for efficient airflow
- Constant Airflow Profile (CAP) airflow monitoring system for consistent performance
- Intrinsically-safe negative pressure design to protect personnel and product
- Air-Wave Entry System enhancing containment
- Contain-Air Negative Pressure Channel ensuring safety
- Supply and exhaust 99.99% efficient HEPA filters; 99.999% efficient ULPA filters available
- Interior-mounted, line-of-sight color LCD with MyLogic OS displaying filter life, alarms, and alerts in 8 languages
- Bright, 90-150 footcandle, glare-free LED lighting outside contaminated area
- Fully-closing, clear 1/4" tempered safety glass sash
- Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots
- Two electrical duplex receptacles, flush-mounted stainless steel with dampened hinges; single outlets on 230V models; ground fault interruption on 115V
- Smart-Start System: user-programmable startup & shutdown
- Leak-tight stainless steel interior and powder-coated steel exterior
- Removable towel catch under work surface
- Code-activated electronic security lock
- 22.6" (57 cm) max sash opening & 27.0" (69 cm) viewing height
- 10° angled sash with counterbalanced, easy lift mechanism
- ADA-compliant touchpad control on right side post
- Removable, seamless type 304 stainless steel dished work surface with lift-out knobs
- Noise level <63 dBA
- Heat load 990 BTU/hour (4' models)
- Nominal inflow velocity of 0.5 m/sec; downflow velocity of 0.3 m/sec
- 3 m power cord with plug
- Five year warranty
- Designed for hard ducting to the outside with room air drawn through supply HEPA filter flowing downward through work area
- Room air also drawn through inlet grille at work access opening
- All contaminated air passes through exhaust HEPA filter
- Dedicated exhaust system and remote blower discharge 100% of filtered exhaust air from laboratory
- No air recirculation enables work with volatile toxic chemicals and radionuclides
Note: All Type B2 Biosafety Cabinets rely on external blowers (usually on the roof of a building) to exhaust 100% of the air entering the cabinet. If the building exhaust blower fails or is mistakenly turned OFF, the cabinet will become pressurized, resulting in contaminated air flowing from the work area into the laboratory. Perform a risk assessment regarding the type of work to be performed in the cabinet if there is an unintended loss of exhaust air.
Required Accessories (Not Included)
- Supporting base if non-welded stand option is not selected
Options
- Available in 4' and 6' widths
- Non-welded, NSF-approved powder-coated steel telescoping base stand with fixed feet
- Accessory Package: 254 nm UV lamp (not included with Scope-Ready models), ADA-compliant service fixture(s) with ball-type valve(s), NSF-approved Vacu-Pass™ Cord & Cable Portal
- Cell Logic+ Packages: Scope-Ready™ Package with 7.0" wide x 10.5" high sash cutout and Pure-Vu™ Seal with powder-coated steel collar. Stand-Still™ Isolation Platform required and sold separately
- Temp-Zone™ Package: temperature-controlled work area, 10.5" wide x 12.0" deep, located on left side of work surface. Circulator required (not included) — min flow rate 1.5-1.9 LPM, typical volume 6L, temperature 0-50° C (chiller/heater)
Compliance
- ETL Listed
- NSF Compliant
- CE Conformity marking
- ISO 5 conditions per ISO 14644-1 and 2
- ADA-Compliant controls and receptacles
Benefits
- Maximum safety for personnel and environment with high-efficiency HEPA/ULPA filtration and negative pressure design
- Advanced airflow monitoring (CAP) ensures consistent containment
- Energy-efficient ECM motor reduces power consumption
- User-friendly MyLogic OS interface with multilingual support
- Durable, leak-tight stainless steel interior and powder-coated exterior for long-lasting performance
- Enhanced usability with scope-ready features, service fixtures, and Vacu-Pass Portal options
- Extensive compliance certifications for global laboratory standards
- Comprehensive warranty and modular options for flexible lab requirements
Why Choose the Labconco 6' Purifier Cell Logic+ Class II Type B2 Biosafety Cabinet with Scope-Ready, Service Fixtures, Vacu-Pass Portal and Base Stand?
The Labconco Purifier Cell Logic+ Class II Type B2 Biosafety Cabinet delivers advanced protection for labs handling hazardous agents and toxic chemicals. Its hard ducted, 100% exhaust design eliminates recirculation, making it ideal for volatile substances. With features like ECM motors, CAP airflow monitoring, and MyLogic OS, it ensures safety and efficiency. Certified to NSF, ETL, and ADA standards, it offers reliable, long-term performance for modern laboratory needs.
