Labconco Protector Stainless Steel ULPA Filtered Glove Box features inlet and outlet ULPA filters that are 99.999% efficient on 0.12 micron particulates, rated for 70 CFM at less than 1.00" static pressure. The built-in blower delivers exhaust volume between ≤28 CFM and ≥45 CFM, with air changes per minute (ACM) from ≤1.5 minimum to ≥2.5 maximum, ensuring optimal containment performance.
Product Features
- Particulate containment under 20 nanograms per cubic meter, confirmed by SafeBridge Consultants, Inc.
- Fast clean-up time with 0.05 ppm average tracer gas levels or less detected after 5 minutes, surpassing ASHRAE 110 standards
- Airborne particulate cleanliness exceeding ISO Class 5 (Class 100) and achieving ISO Class 4 conditions
- Factory leak-tested with helium mass spectrometer at 1 inch of water gauge, with no detectable leaks above 1 x 10-6 ml/sec
- Inlet and outlet HEPA or ULPA filters prevent contaminants from entering or leaving the glove box chamber
- Test port for filter integrity challenge
- True Bag-In/Bag-Out filter disposal system for safe filter replacement
- LCD display for real-time monitoring of airflow (CFM), air changes per minute (ACM), and chamber pressure
- Built-in blower with adjustable speed control, airflow range 15 to 85 CFM
- Large viewing window, 36" wide x 27.6" high, laminated safety glass 3/8” thick
- Space-saving inner and outer transfer chamber doors that pivot upward, counterbalanced and equipped with quick-latches
- Interior right-side wall pass-through plug for optional accessories: electrical outlet, RS-232 port, gas/liquid port, or oxygen/moisture monitor
- Two 8” ID epoxy-coated aluminum double-grooved glove ports spaced 17” apart with neoprene gaskets
- Two 25-watt fluorescent lights exceeding 100 footcandles
- Durable dry-powder epoxy-coated 18 and 20 gauge steel exterior panels
- Pair of neoprene gloves included, 0.015” thick, 30” long, size 9 ¾
Options
- Chemical-resistant one-piece molded fiberglass liner or Type 304 stainless steel liner
- Clear acrylic inner and outer transfer chamber doors (fiberglass-lined models)
- Type 304 stainless steel inner and outer transfer chamber doors and front panel (stainless steel-lined models)
- Inlet and outlet HEPA (fiberglass-lined) or ULPA (stainless steel-lined) filters
- Protector Stainless Steel Double Filtered Glove Boxes with 81.84” interior working width and four glove ports
Required Accessories (Not Included)
- Adjustable Height Base Stands
Optional Accessories
- Balance Vibration Isolator
- Anti-Static Ionizer Fan
- Gloves and Glove Box Accessories
- HEPA Inlet or Exhaust Filters
Benefits
- Maximum operator protection with ULPA filtration and leak-tight containment
- Real-time monitoring for safe and efficient operation
- Spacious interior with ergonomic design for ease of use
- Customizable options for a variety of laboratory applications
Why Choose Labconco Protector Stainless Steel ULPA Filtered Glove Box?
Labconco’s Protector Stainless Steel ULPA Filtered Glove Box delivers unmatched containment performance, advanced filtration, and user-friendly design. It is the trusted choice for laboratories handling hazardous materials requiring stringent ISO Class 3 conditions and beyond.
