Labconco Protector Fiberglass HEPA Filtered Glove Box features inlet and outlet HEPA filters with 99.99% efficiency on 0.3 micron particulates, rated for 70 CFM at less than 0.90" static pressure. The built-in blower delivers exhaust volumes from ≤28 CFM to ≥60 CFM, with air changes per minute (ACM) ranging from ≤1.5 minimum to ≥3.3 maximum, ensuring superior containment.
Product Features
- Particulate containment below 20 nanograms per cubic meter, confirmed by SafeBridge Consultants, Inc.
- Fast clean-up time with 0.05 ppm average tracer gas or less detected after 5 minutes, surpassing ASHRAE 110 standards
- Airborne particulate cleanliness exceeds ISO Class 5 (Class 100) and achieves ISO Class 4 conditions
- Factory leak-tested with helium mass spectrometer at 1 inch of water gauge, with no detectable leaks above 1 x 10-6 ml/sec
- Inlet and outlet HEPA or ULPA filters to prevent contamination ingress or egress
- Test port for HEPA or ULPA filter integrity challenge
- True Bag-In/Bag-Out filter disposal system for safe filter replacement
- LCD display for real-time monitoring of airflow (CFM), air changes per minute (ACM), and chamber pressure
- Built-in blower with adjustable speed control, airflow range 15 to 85 CFM
- Large 36” wide by 27.6” high laminated safety glass viewing window
- Space-saving, upward pivoting inner and outer transfer chamber doors, counterbalanced with quick-latches
- Interior right-side wall pass-through plug for optional accessories: electrical outlet, RS-232 port, gas/liquid port, oxygen or moisture monitor
- Two 8” ID epoxy-coated aluminum double-grooved glove ports spaced 17” apart with neoprene gaskets
- Two 25-watt fluorescent lights exceeding 100 footcandles
- Durable dry-powder epoxy-coated 18 and 20 gauge steel exterior panels
- Includes a pair of neoprene gloves, 0.015” thick, 30” long, size 9 ¾
Options
- Chemical resistant one-piece molded fiberglass liner or Type 304 stainless steel liner
- Clear acrylic inner and outer transfer chamber doors (fiberglass-lined models)
- Type 304 stainless steel inner and outer transfer chamber doors and front panel (stainless steel-lined models)
- Inlet and outlet HEPA (fiberglass-lined) or ULPA (stainless steel-lined) filters
- Protector Stainless Steel Double Filtered Glove Boxes with 81.84” interior working width and four glove ports
Required Accessories (Not Included)
- Adjustable Height Base Stands
Optional Accessories
- Balance Vibration Isolator
- Anti-Static Ionizer Fan
- Gloves and Glove Box Accessories
- HEPA Inlet or Exhaust Filters
Benefits
- Superior operator protection with HEPA filtration and leak-tight containment
- Real-time monitoring ensures safety and efficient operation
- Spacious and ergonomic design for comfortable, practical use
- Customizable to meet a variety of laboratory application needs
Why Choose Labconco Protector Fiberglass HEPA Filtered Glove Box?
Labconco’s Protector Fiberglass HEPA Filtered Glove Box provides advanced filtration, exceptional containment, and ease of use for laboratories managing hazardous materials under strict ISO Class 3 standards. It is an ideal solution for reliable operator safety and contamination control.
