The Labconco 6' Purifier Cell Logic+ Class II Type B2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixtures, Vacu-Pass Portal and Base Stand, 230V, 50/60Hz provides advanced personnel, product, and environmental protection from hazardous particulates including agents requiring Biosafety Level 1, 2, or 3 containment. Ideal for work involving antineoplastic drugs, genetic material, asbestos, and other hazardous airborne substances, this NSF compliant cabinet ensures uncompromised laboratory safety.
Product Features
- Electronically Commutated Motor (ECM)
- Constant Airflow Profile (CAP) airflow monitoring system
- Intrinsically-safe negative pressure design
- Air-Wave Entry System
- Contain-Air Negative Pressure Channel
- Supply and exhaust 99.99% efficient HEPA filters; 99.999% efficient ULPA filters available
- Interior-mounted, line-of-sight, color LCD with MyLogic OS displays filter life, alarm status, and alerts in 8 languages
- Bright, 90-150 footcandle, glare-free LED lighting located outside the contaminated work area
- Fully-closing, clear 1/4" tempered safety glass sash
- Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots
- Two electrical duplex receptacles; flush-mounted stainless steel with dampened hinges. Single outlets on 230V models.
- Smart-Start System user-programmable start-up & shut-down
- Leak-tight stainless steel interior & powder-coated steel exterior
- Removable towel catch located under work surface
- Code-activated electronic security lock
- 22.6" (57 cm) max sash opening & 27.0" (69 cm) viewing height
- 10° Angled sash with counterbalanced, easy lift mechanism
- ADA-Compliant touchpad control on right side post
- Removable, seamless type 304 stainless steel, dished work surface with lift-out knobs
- Noise level <63 dBA
- Heat load 990 BTU/hour (4' models)
- Nominal inflow velocity of 0.5 m/sec
- Nominal downflow velocity of 0.3 m/sec
- 3 m power cord with plug
- Five year warranty
Note: All Type B2 Biosafety Cabinets rely on external blowers (usually on the roof of a building) to exhaust 100% of the air entering the cabinet. If the building exhaust blower fails or is mistakenly turned OFF, the cabinet will become pressurized, resulting in contaminated air flowing from the work area into the laboratory. Perform a risk assessment regarding the type of work to be performed in the cabinet if there is an unintended loss of exhaust air.
Required Accessories (Not Included)
- Supporting base if non-welded stand option is not selected
Options
- 4' and 6' widths
- Non-welded, NSF-Approved, powder-coated steel telescoping base stand with fixed feet
- Accessory Package: 254 nm UV lamp (not included with Scope-Ready models), ADA-compliant service fixture(s) with ball-type valve(s), and NSF-Approved Vacu-Pass™ Cord & Cable Portal
- Cell Logic+ Packages: Scope-Ready™ Package consisting of 7.0" wide x 10.5" high (18 x 27 cm) sash cutout and Pure-Vu™ Seal with powder-coated steel collar. Stand-Still™ Isolation Platform is required and sold separately.
- Temp-Zone™ Package: Temperature-controlled work area, 10.5" wide x 12.0" deep (27 x 30 cm) located on left side of work surface. Circulator required (not included). Circulator specs: min. flow rate 0.4-0.5 GPM (1.5-1.9 LPM), typical volume 6 L, temperature 0-50° C (chiller/heater)
Compliance
- ETL listed
- NSF compliant
- CE Conformity marking
- ISO 5 conditions per ISO 14644-1 and 2
- ADA-Compliant (controls and receptacles)
Benefits
- Provides 100% exhaust of contaminated air, ideal for volatile toxic chemicals and radionuclides.
- Advanced airflow monitoring and negative pressure design for superior containment.
- High-efficiency HEPA and optional ULPA filters ensure optimal air purification.
- User-friendly LCD interface with multilingual support and programmable start/shutdown features.
- Durable stainless steel interior and powder-coated exterior withstand harsh lab conditions.
- Quiet operation and energy-efficient ECM motor enhance lab comfort.
- Customizable options including Temp-Zone temperature control and accessory packages to fit lab needs.
- Meets international biosafety and quality standards for safe lab environments.
Why Choose the Labconco 6' Purifier Cell Logic+ Class II Type B2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixtures, Vacu-Pass Portal and Base Stand?
The Labconco Purifier Cell Logic+ Class II Type B2 Biosafety Cabinet offers reliable safety by exhausting all filtered air outside the lab, perfect for handling hazardous chemicals and radionuclides. Combining state-of-the-art airflow technology, intuitive controls, and robust construction, it meets strict biosafety level 1-3 requirements. Backed by a five-year warranty, it’s the dependable solution for labs demanding high containment and operational flexibility.
