The Labconco 6' Purifier Cell Logic+ Class II Type B2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixtures and Vacu-Pass Portal, 230V, 50/60Hz provides comprehensive personnel, product, and environmental protection from hazardous particulates including agents requiring Biosafety Level 1, 2, or 3 containment. Designed for work with antineoplastic drugs, genetic material, asbestos, and other airborne hazardous substances, this NSF compliant cabinet ensures safe and effective lab operations.
Product Features
- Electronically Commutated Motor (ECM)
- Constant Airflow Profile (CAP) airflow monitoring system
- Intrinsically-safe negative pressure design
- Air-Wave Entry System
- Contain-Air Negative Pressure Channel
- Supply and exhaust 99.99% efficient HEPA filters; 99.999% efficient ULPA filters available
- Interior-mounted, line-of-sight, color LCD with MyLogic OS displays filter life, status messages for alarm conditions and alerts in 8 languages
- Bright, 90-150 footcandle, glare-free LED lighting located outside the contaminated work area
- Fully-closing, clear 1/4" tempered safety glass sash
- Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots
- Two electrical duplex receptacles. Flush-mounted stainless steel with dampened hinges. Single outlets on 230V models.
- Smart-Start System user-programmable start up & shut down
- Leak-tight stainless steel interior & powder-coated steel exterior
- Removable towel catch located under work surface
- Code-activated electronic security lock
- 22.6" (57 cm) max. sash opening & 27.0" (69 cm) viewing height
- 10° Angled sash with counterbalanced, easy lift mechanism
- ADA-Compliant touchpad control on right side post
- Removable, seamless type 304 stainless steel, dished work surface with lift out knobs
- Noise level <63 dBA
- Heat load 990 BTU/hour (4' models)
- Nominal inflow velocity of 0.5 m/sec
- Nominal downflow velocity of 0.3 m/sec
- 3 m power cord with plug
- Five year warranty
Note: All Type B2 Biosafety Cabinets rely on external blowers (usually on the roof of a building) to exhaust 100% of the air entering the cabinet. If the building exhaust blower fails or is mistakenly turned OFF, the cabinet will become pressurized, resulting in contaminated air flowing from the work area into the laboratory. Perform a risk assessment regarding the type of work to be performed in the cabinet if there is an unintended loss of exhaust air.
Required Accessories (Not Included)
- Supporting base if non-welded stand option is not selected
Options
- 4' and 6' widths
- Non-welded, NSF-Approved, powder-coated steel telescoping base stand with fixed feet
- Accessory Package: 254 nm UV lamp (not included with Scope-Ready models), ADA-compliant service fixture(s) with ball-type valve(s), and NSF-Approved Vacu-Pass™ Cord & Cable Portal
- Cell Logic+ Packages: Scope-Ready™ Package consisting of 7.0" wide x 10.5" high (18 x 27 cm) sash cutout and Pure-Vu™ Seal with powder-coated steel collar. Stand-Still™ Isolation Platform is required and sold separately.
- Temp-Zone™ Package consisting of temperature-controlled work area, 10.5" wide x 12.0" deep (27 x 30 cm) located on the left side of the work surface. Circulator is required (not included). Circulator requirements: minimum flow rate of 0.4-0.5 GPM (1.5-1.9 LPM), typical volume of 6 liters, and temperature of 0-50° C (chiller/heater).
Compliance
- ETL listed
- NSF compliant
- CE Conformity marking
- ISO 5 conditions per ISO 14644-1 and 2
- ADA-Compliant (controls and receptacles)
Benefits
- Ensures 100% exhaust of contaminated air, suitable for volatile toxic chemicals and radionuclides.
- Advanced airflow monitoring and intrinsically-safe negative pressure design for maximum containment.
- High-efficiency HEPA and optional ULPA filters provide superior air purification.
- Intuitive LCD interface with multilingual support and programmable start/shutdown functions.
- Robust stainless steel interior and powder-coated exterior offer durability in harsh lab conditions.
- Quiet operation and energy-efficient ECM motor improve lab environment comfort.
- Customizable options including Temp-Zone temperature control and accessory packages adapt to lab needs.
- Complies with international safety and quality standards for biosafety cabinets.
Why Choose the Labconco 6' Purifier Cell Logic+ Class II Type B2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixtures and Vacu-Pass Portal?
The Labconco Purifier Cell Logic+ Class II Type B2 Biosafety Cabinet delivers uncompromised safety by exhausting all filtered air outside the laboratory, making it ideal for hazardous chemical and radioactive applications. Combining cutting-edge airflow technology, user-friendly controls, and durable construction, it is engineered to meet rigorous biosafety level 1-3 requirements. Supported by a five-year warranty, this cabinet is a reliable choice for laboratories demanding high-performance containment and operational flexibility.
