The Labconco 4' Purifier Cell Logic+ Class II Type B2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixture, Vacu-Pass Portal and Base Stand, 230V, 50/60Hz provides comprehensive personnel, product, and environmental protection from hazardous particulates including agents requiring Biosafety Level 1, 2, or 3 containment. This cabinet is designed for applications involving antineoplastic drugs, genetic material, asbestos, and other airborne hazardous substances, and is NSF compliant.
Product Features
- Electronically Commutated Motor (ECM)
- Constant Airflow Profile (CAP) airflow monitoring system
- Intrinsically-safe negative pressure design
- Air-Wave Entry System
- Contain-Air Negative Pressure Channel
- Supply and exhaust 99.99% efficient HEPA filters; 99.999% efficient ULPA filters available
- Interior-mounted, line-of-sight, color LCD with MyLogic OS displaying filter life, alarm status, and alerts in 8 languages
- Bright, 90-150 footcandle, glare-free LED lighting located outside the contaminated work area
- Fully-closing, clear 1/4" tempered safety glass sash
- Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots
- Two electrical duplex receptacles (flush-mounted stainless steel with dampened hinges); single outlets on 230V models
- Smart-Start System with user-programmable start-up and shut-down
- Leak-tight stainless steel interior and powder-coated steel exterior
- Removable towel catch located under work surface
- Code-activated electronic security lock
- 22.6" (57 cm) max sash opening & 27.0" (69 cm) viewing height
- 10° Angled sash with counterbalanced, easy-lift mechanism
- ADA-Compliant touchpad control on right side post
- Removable, seamless type 304 stainless steel, dished work surface with lift-out knobs
- Noise level below 63 dBA
- Heat load 990 BTU/hour (4' models)
- Nominal inflow velocity of 0.5 m/sec
- Nominal downflow velocity of 0.3 m/sec
- 10' (3 m) power cord with plug
- Five year warranty
Note: All Type B2 Biosafety Cabinets rely on external blowers (usually on the roof of a building) to exhaust 100% of the air entering the cabinet. If the building exhaust blower fails or is mistakenly turned OFF, the cabinet will become pressurized, resulting in contaminated air flowing from the work area into the laboratory. Perform a risk assessment regarding the type of work to be performed in the cabinet if there is an unintended loss of exhaust air.
Required Accessories (Not Included)
- Supporting base if non-welded stand option is not selected
Options
- 4' and 6' widths
- Non-welded, NSF-Approved, powder-coated steel telescoping base stand with fixed feet
- Accessory Package: 254 nm UV lamp (not included with Scope-Ready models), ADA-compliant service fixture(s) with ball-type valve(s), and NSF-Approved Vacu-Pass™ Cord & Cable Portal
- Cell Logic+ Packages: Scope-Ready™ Package with 7.0" wide x 10.5" high sash cutout and Pure-Vu™ Seal with powder-coated steel collar (Stand-Still™ Isolation Platform required and sold separately)
- Temp-Zone™ Package: Temperature-controlled work area (10.5" wide x 12.0" deep) located on left side of work surface. Circulator required (not included). Circulator specs: min. flow 0.4-0.5 GPM (1.5-1.9 LPM), typical volume 6 L, temperature 0-50° C (chiller/heater)
Compliance
- ETL listed
- NSF compliant
- CE Conformity marking
- ISO 5 conditions per ISO 14644-1 and 2
- ADA-Compliant (controls and receptacles)
Benefits
- Provides total exhaust of contaminated air, ideal for work with volatile toxic chemicals and radionuclides.
- Advanced airflow monitoring and intrinsically-safe negative pressure design for reliable containment.
- High-efficiency HEPA and optional ULPA filters ensure maximum air purification.
- User-friendly LCD interface with multilingual support and programmable functions enhances ease of operation.
- Durable stainless steel interior and powder-coated exterior withstand harsh lab environments.
- Low noise operation and energy-efficient ECM motor contribute to a comfortable lab atmosphere.
- Wide range of customization options including temperature control and accessory packages to suit specific lab needs.
- Meets international safety and quality standards for biosafety cabinets.
Why Choose the Labconco 4' Purifier Cell Logic+ Class II Type B2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixture, Vacu-Pass Portal and Base Stand?
The Labconco Purifier Cell Logic+ Class II Type B2 Biosafety Cabinet offers superior protection by exhausting 100% of contaminated air, making it ideal for labs handling hazardous chemicals and radionuclides. Featuring advanced airflow systems, intuitive controls, and robust construction, it ensures safety, reliability, and flexibility in biosafety level 1-3 applications. Backed by a five-year warranty, it’s the trusted choice for modern laboratories demanding uncompromised containment and performance.
