PMP IPC LVR 4CHNL 8RLR 230V_1171314
Representative image only


Accuracybetter than ±1%
Control typeVariable-Speed Digital
DescriptionIP Standard-Speed Digital Peristaltic Pump; 4-Channel, 230V
Duty cycleContinuous
Height (InchShort)5
Length (InchShort)7
Max Flow Rate (mLmin)44
Max Flow Rate Per Channel (mLmin)44
Max pressure (bar)1.5
Max pressure (psi)22
Max rpm45
Min Flow Rate (mLmin)0.002
Min Flow Rate Per Channel (mLmin)0.002
Min RPM0.4
Number of Channels4
Number of Rollers8
Power (Hz)50
Power (VAC)230
Remote Inputs0 to 5 VDC, 0 to 10 VDC, 0 to 20 mA, 4 to 20 mA
Tubing2-Stop Tubing
Width (InchShort)6
Instruction Manual
Instruction Manual
  • Fewer tubing changes!
  • Planetary drive for less pulsation and longer tubing life
  • Smooth rotation and accurate liquid flow provided by eight SS rotors
  • Easy repeatability with four-digit LED
  • Simple to use—automatic occlusion cartridges provide reproducible results
  • Control via keypad, computer, or remote control
  • Maximum speed is 45 rpm
    Four channels for four times the flow
    Use 230 VAC in most non-North American countries
    Adjustable occlusion cartridges included

These multichannel programmable pumps feature planetary gears that drive eight stainless steel rollers in unison for smooth rotation and accurate liquid flow. The four-digit LED display shows flow rate or rpm when pump is running. Use the MAX button to instantly increase speed for priming or flushing without disturbing your programmed settings.

Combine tubing sizes and formulations to suit your application. Click’n’go™ cartridges feature automatic occlusion for simplified use, fewer tubing changes, and reproducible results. Adjustable occulsion cartridges are available separately. Install cartridges in one direction for low pulsation; in opposite direction for higher counter pressure.

Order the two-stop tubing size and formulation to suit your application needs (sold separately). More than 100 options exist—the most popular sizes and formulations can be found under Accessories below!

Ideal for continuous pumping or for dispensing in any of five modes:
- Flow rate: 0.0004 to 44 mL/min (depending on tubing size used and model used)
- By time: 0.1 seconds to 999.9 hours
- Batches: set delay between dispensed volumes
- Drip-free: program back-steps to prevent drips
- Volume displays in mL or µL

Pumps feature analog input and output controls, as well as an RS-232 interface for control by a computer.

Remote control capabilities: RS-232 to control all operating functions (DB9 male); 0 to 5 VDC, 0 to 10 VDC, 0 to 20 mA, 4 to 20 mA for start/stop and autostart via contact closure (DB15 male); footswitch (three-pin DIN port). Monitor speed via analog output.

Whats Included:

Adjustable pressure lever cartridge and power cord.

Over 40,000 Customers Trust John Morris