Model:113B03 - High frequency pressure sensor, 15k psi, 0.39 pC/psi, 0.218" dia. diaphragm, accelerometer comp., 5-point cal ranges at 15kpsi, 5kpsi and 100 psi_1111449
Representative image only

Model:113B03 - High frequency pressure sensor, 15k psi, 0.39 pC/psi, 0.218" dia. diaphragm, accelerometer comp., 5-point cal ranges at 15kpsi, 5kpsi and 100 psi

$1,919.50

The price is inclusive of GST
Drawing (PDF)
Product Manual (PDF)
Specifications (PDF)
Overview
High frequency pressure sensor, 15k psi, 0.39 pC/psi, 0.218" dia. diaphragm, accelerometer comp., 5-point cal ranges at 15kpsi, 5kpsi and 100 psi


Product Specifications
 ENGLISHSI 
Performance
    Sensitivity (±15 %)0.39 pC/psi0.056 pC/kPa 
    Measurement Range15000 psi103420 kPa 
    Maximum Pressure15000 psi103420 kPa 
    Resolution0.01 psi0.07 kPa[1][2] 
    Resonant Frequency≥500 kHz≥500 kHz 
    Rise Time (Reflected)≤1.0 µ sec≤1.0 µ sec 
    Non-Linearity≤1.0 % FS≤1.0 % FS[3] 
Environmental
    Acceleration Sensitivity≤0.002 psi/g≤0.0014 kPa/(m/s²) 
    Temperature Range (Operating)-400 to +400 °F-240 to +204 °C 
    Temperature Coefficient of Sensitivity≤0.03 %/°F≤0.054 %/°C[2] 
    Maximum Flash Temperature3000 °F1649 °C 
    Maximum Shock20000 g pk196140 m/s² pk 
Electrical
    Output Polarity (Positive Pressure)NegativeNegative 
    Capacitance12 pF12 pF[2] 
    Insulation Resistance (at room temp)≥1000000000000 Ohm≥1000000000000 Ohm 
Physical
    Sensing ElementQuartzQuartz 
    Sensing GeometryCompressionCompression 
    Housing Material17-4 Stainless Steel17-4 Stainless Steel 
    DiaphragmInvarInvar 
    SealingWelded HermeticWelded Hermetic 
    Electrical Connector10-32 Coaxial Jack10-32 Coaxial Jack 
    Weight0.212 oz6.0 gm 

All specifications are at room temperature unless otherwise specified.
Product Notes
[1] Resolution dependent on range setting and cable length used in charge system.
[2] Typical.
[3] Zero-based, least-squares, straight line method.
Accessories:
Supplied
060A03Clamp nut, 5/16-24-2A thd, 1/4" hex, stainless steel(1)
060A05Clamp nut M7 x 0.75-6g thd(1)
065A02Seal ring, sensor flush mount, 0.248" OD x 0.219" ID x 0.015" thk, brass(3)
065A05Seal sleeve sensor recess mount 0.248" OD x 0.221" ID x 0.240" thk 17-4(1)
Optional Versions:
(E) Emralon coating
 ENGLISHSI
    CoatingEmralonEmralon
    Electrical Isolation100000000 100000000
Accessories:
    065A08Isolation ring 0.250"OD x 0.218" ID x 0.027" thk anodized aluminum(3)
    065A22Isolation Seal, .250" OD x .218" ID x .015", Torlon or Vespel(3)
(H) Hermetic Seal
 ENGLISHSI
    SealingWelded HermeticWelded Hermetic
(S) Stainless Steel Diaphragm
 ENGLISHSI
    Diaphragm316L Stainless Steel316L Stainless Steel
(W) Water Resistant Cable
 ENGLISHSI

Over 40,000 Customers Trust John Morris