CFLUX-1 Automated Soil CO2 Flux System_1629624
CFLUX-1 Automated Soil CO2 Flux System_1629624
CFLUX-1 Automated Soil CO2 Flux System_1629624
Representative image only

CFLUX-1 Automated Soil CO2 Flux System

Accuracy< 1% of span concentration over the calibrated range but limited by the accuracy of the calibration mixture
Air Temperature Accuracy+/- 0.5 °C at 25 °C
Air Temperature Range-20 °C to +50 °C
Analysis MethodTwo non-dispersive infrared, configured as an absolute absorptiometer with microprocessor control of linearization for both CO2 and H2O. All readings are automatically corrected for temperature, pressure and foreign gas broadening
CalibrationUser-programmable calibration (If required)
Chamber Volume2500 cm3
CO2 Range0-2000 µmol mol-1 (Standard) • Precision: 1 µmol mol-1 For high CO2 environments the system can be calibrated up to 30000 ppm
Data StorageUSB flash drive port for date storage
Dimensions60.75 cm (L) x 30 cm (H) x 30 cm (W)
EnclosureHinged, rugged, polycarbonate enclosure, -20 to +50 °C, non-condensing
Humidity Range0-75 mb • Precision: 0.1 mb
Linearity< 1% throughout the range
Measured area336 cm2
Power7-16 VDC (User supplied)
Power Consumption (VA)Warm up: 15W (12V at 1.2A); Normal operation: 7.2W (12V at 0.6A)
Sampling PumpIntegral pump for sample (analysis) air • Range: 200-500 cc/min An internal electronic flow sensor monitors flow rate
Sampling Rate10 Hz
Sensor InputsFor use with commercially available sensors (soil moisture, soil temperature. etc.) • One analog input (0-1V) • One SDI-12 input
StabilityAuto-Zero at regular intervals corrects for sample cell contamination, source and detector aging and changes in electronics
Warm-Up TimeApproximately 15 minutes
Weight (kg)8.5 kg
CFLUX-1 Application Note ; Soil Carbon Fluxes and Estimation of Carbon Balance
AN_CFLUX-1_Soil-Respiration-in-a-Temperate-Agroecosystem
CFLUX-1 Data Sheet
Overview

 

Automated Soil CO2 Flux System

• Fully automatic, programmable & stand-alone operation

• Integral CO2 & H2O infrared gas analyzers

• WiFi for setup & remote monitoring from desktop & mobile devices

• Easy installation & setup

• Optional sensors for soil moisture & soil temperature

 

A dedicated, self-contained system for long-term deployment and unattended operation for measurement of soil CO2 flux. Ideal for both spatial and temporal analysis. With all key components built into a single station, there is no limit to where systems can be placed in the field

Each CFLUX-1 Automated Soil CO2 Flux System has integral, accurate, non-dispersive infrared gas analyzers for CO2 and H2O. Two independent infrared gas analyzers in each system means accurate measurement and fast response times regardless of where each system is stationed – eliminating problems associated with long distances between chambers, analyzers and multiplexing devices. A robust, water tight enclosure protects the built-in CO2 and H2O gas analyzers, electronics and terminal block connections.

Incorporated into each CFLUX-1 system, Auto-Zero eliminates the need for field recalibration and allows for fast warm-up, adaptation to changing ambient conditions and excellent stability and accuracy for both CO2 and H2O.

The CFLUX-1 has one SDI-12 input and one analog input (0-1V) for use with commercially available sensors for measurement of soil moisture and soil temperature. Soil moisture and soil temperature can be measured and recorded along with flux data. 

Onboard WiFi access point is used for setting up and monitoring the system remotely from your phone or computer. If connected to a local computer with a router the CFLUX-1 system can be monitored from anywhere in the world with internet access.

The CFLUX-1 can be calibrated up to 30000 ppm for soil CO2 flux measurements in high CO2 environments such as volcanic areas.

The CFLUX-1 system includes full data storage direct to a USB Flash Drive (memory stick). Sensor data and information can also easily be stored on an external data logger if necessary. 

Our large hemispherical chamber (2500 cm3) is carefully designed to ensure uniform air mixing and accurate measurement of soil CO2 flux. It includes an internal mixing fan with adjustable control that can be enabled or disabled by the user on demand, enhancing air circulation inside the chamber. It also features a unique venting system to balance the pressure between chamber air and ambient air. A power-efficient actuator and electronics control the opening and closing of the chamber at user-defined time intervals. Four user-adjustable legs allow the chamber to be easily deployed at the field site. 

Over 40,000 Customers Trust John Morris