The Haier Biomedical CO2 incubator uses professional and superior technology to provide reliable conditions for frontline medical staff to carry out epidemiological and translational research, and to create a stable cell and virus culture environment.
Accurate Temperature Control - Controls the temperature precisely, within ±0.1°C, with six-sided heating based on the fuzzy PID control principle,to provide a stable temperature to ensure the normal growth of cells throughout their life cycle.
New IR Sensor Control Technology for Precise CO2 Concentration - Uses NDIR measurement principles and withstands high temperatures of 190°C. The silicon MEMS transmitter can carry out more than 300 dry heat sterilization cycles to extend the service life to 15 years. Built-in temperature and humidity compensation technology reduces the impact of changes in humidity and temperature without the need for calibration after the high temperature sterilization. Five point calibration yields a higher measuring accuracy, sensitivity with less drift.
Fast Environment Recovery for Optimal Cell Growth - Adopting active air flow control technology, and based on the fuzzy PID control principle, the parameters can be restored without overshoot. After opening the door for 30 seconds, the temperature and CO2 concentration can be quickly restored within 4 minutes. Even if multiple users share a CO2 incubator and frequently open and close the door, the stability and uniformity of the incubator can be ensured.
180 Degree Dry Heat Sterilisation - Easy and effective sterilization of microorganisms including bacteria, fungi and microplasma with strong resistance at 180°C without the need for consumables. Simply press the “sterilization key” and the sterilization process automatically completes in just 12 hours. No need to dissemble internal components during proceedure.
High Efficency Microbial Filter - The CO2 inlet is equipped with a high-efficiency microbial fillter, with 99.99% filltration effciency for particles larger than or equal to 0.2µm in diameter. It can effectively fillter
bacteria and dust particles in the CO2 gas line to ensure the safety of experimental results.
Easy to Clean Interior - The working chamber is plasma electro polished, stamped stainless steel with wide-arc, laser welded corners. Bracketless shelving design ensures that it is quick and easy to clean.
