- PRE-TARE function for manual subtraction of a known container weight, useful for checking fill-levels
- Freely programmable weighing unit, e. g. display directly in special units such as length of thread g/m, paper weight g/m2, or similar
- Ring-shaped draft shield standard, only for models with weighing plate size , weighing space ØxH 90x40 mm
- Note: Individual header data: the free software KERN SHM-01 can be used to print 4 header lines on the printout for printers 911-013 and YKB-01N. You can easily download the software here (unfortunately it cannot be sent out as a CD): Software full-version|
- *Optional Dakks Calibration/Verification certificate available on request
Representative image only
PCB-250-3 Precision balance 0,001 g ; 250 g *Optional Dakks Calibration/Verification certificate available on request
$881.10
Batteryja
Charging time8 h
Dimensions packaging (WxDxH)230 mm x 360 mm x 180 mm
Display digit height2,100 cm
DKD Certificate963-127 (*Optional)
Environment max. humidity0.8
Environment max. temperature35 °C
Environment min. temperature5 °C
Gross Weight1,490 kg
Input Voltage220 V - 240 V AC 50 Hz
Linearity5 mg
Material weighing platePlastic
Mininum piece weight at piece counting2 mg
Mininum piece weight at piece counting22 mg
Net Weight975 g
Operating time12 h
Operating time (Backlight on)24 h
Readout [d]1 mg
Rechargeable batteryAccu optional
Reference quantity5 10 20 25 50
Reproducibility1 mg
Stabilisation time3 s
Weighing area diameter81
Weighing Range [Max]250 g
Weighing systemStrain gauge
Weighing unitsct dwt ffa g gn kg lb mo oz ozt t tl (HK) tl (Singap. Malays) tl (Tw) to
PCB-BA-e-1315-John-Morris.pdf
sl-pcb-gb-John-Morris.pdf
Overview
- PRE-TARE function for manual subtraction of a known container weight, useful for checking fill-levels
- Freely programmable weighing unit, e. g. display directly in special units such as length of thread g/m, paper weight g/m2, or similar
- Ring-shaped draft shield standard, only for models with weighing plate size , weighing space ØxH 90x40 mm
- Note: Individual header data: the free software KERN SHM-01 can be used to print 4 header lines on the printout for printers 911-013 and YKB-01N. You can easily download the software here (unfortunately it cannot be sent out as a CD): Software full-version|
- *Optional Dakks Calibration/Verification certificate available on request