Model:086D20 - Short-sledge Impulse Hammer w/force sensor & tips, 0 to 5k lbf, 1 mV/lbf (0.23 mV/N)_1105449
Representative image only

Model:086D20 - Short-sledge Impulse Hammer w/force sensor & tips, 0 to 5k lbf, 1 mV/lbf (0.23 mV/N)

$4,659.60

The price is inclusive of GST
Constant Current Excitation2 to 20 mA
Discharge Time Constant≥1400 sec
Electrical Connection PositionBottom of Handle
Electrical ConnectorBNC Jack
Excitation Voltage20 to 30 VDC
Hammer Length (English)14.5 in
Hammer Length (SI)37 cm
Hammer Mass (English)2.4 lb
Hammer Mass (SI)1.1 kg
Head Diameter (English)2.0 in
Head Diameter (SI)5.1 cm
Measurement Range (English)±5000 lbf pk
Measurement Range (SI)±22240 N pk
Non-Linearity≤1 %
Output Bias Voltage8 to 14 VDC
Output Impedance<100 Ohm
Resonant Frequency≥12 kHz
SealingHermetic
Sensing ElementQuartz
Sensitivity (±15 %) (English)1 mV/lbf
Sensitivity (±15 %) (SI)0.23 mV/N
Tip Diameter (English)2.0 in
Tip Diameter (SI)5.1 cm
Drawing (PDF)
Overview

Impact Hammer, ICP®
Short-sledge Impulse Hammer w/force sensor & tips, 0 to 5k lbf, 1 mV/lbf (0.23 mV/N)


Product Specifications
  ENGLISH SI  
Performance
    Sensitivity (±15 %) 1 mV/lbf 0.23 mV/N  
    Measurement Range ±5000 lbf pk ±22240 N pk  
    Resonant Frequency ≥12 kHz ≥12 kHz  
    Non-Linearity ≤1 % ≤1 %  
Electrical
    Excitation Voltage 20 to 30 VDC 20 to 30 VDC  
    Constant Current Excitation 2 to 20 mA 2 to 20 mA  
    Output Impedance <100> <100> [1] 
    Output Bias Voltage 8 to 14 VDC 8 to 14 VDC  
    Discharge Time Constant ≥1400 sec ≥1400 sec [1] 
Physical
    Sensing Element Quartz Quartz  
    Sealing Hermetic Hermetic  
    Hammer Mass 2.4 lb 1.1 kg  
    Head Diameter 2.0 in 5.1 cm  
    Tip Diameter 2.0 in 5.1 cm  
    Hammer Length 14.5 in 37 cm  
    Electrical Connection Position Bottom of Handle Bottom of Handle  
    Electrical Connector BNC Jack BNC Jack  

All specifications are at room temperature unless otherwise specified.

Product Notes
[1] Typical.
Accessories:
Supplied
084A60 Tip - super soft plastic, gray (1)
084A61 Tip - soft plastic, brown (1)
084A62 Tip - medium plastic, red (1)
084A63 Tip - hard plastic, black (1)
HCS-2 Calibration of Series 086 instrumented impact hammers (1)
Optional Versions:
(T) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4
  ENGLISH SI
    Output Bias Voltage 8.5 to 15 VDC 8.5 to 15 VDC
(TLD) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4
  ENGLISH SI
    Output Bias Voltage 8.5 to 15 VDC 8.5 to 15 VDC

Over 40,000 Customers Trust John Morris