SafetyCap II, V2.0, GL45 2x PFA-fitting 3,2 mm OD with air valve
$261.80
Maximum safety for HPLC solvent supply. The integrated air valve (B) blocks hazardous vapours and cleans the inflowing air (M) from dust and dirt particles.
-Protection against escaping solvent vapours
-Solvents (L) und and mixtures remain clean and stable
-No twisted tubing, easy container exchange
-No air intake in to the HPLC system
-Reproducible analytical results through stable mobile phase
-Use the supplied blind plugs to tighten connections which are temporarily inactive or not in use
-Air valve (B) with PTFE filter (G) and Luer-Lock adapter (A)
-Valve membrane (H) optimized for analytical and preparative flow rates
-Improved PFA fittings (C)
-Body (D / I) made of medical grade PTFE, food safe, FDA conform
-Screw cap (F) made of PPS, autoclavable / sterilisable up to 200 °C
-PTFE and PPS with excellent chemical resistance and flammability classification V-0 (UL-94)
-Insertion label (E) for individual inscription
-Improved FKM seal (J) for stable fit on any bottle
-Improved ergonomics and construction (K)
Safe solvent supply. With integral air filter vent. For maximum efficiency, we recommend that the vent is changed every 6 months. The filter membrane absorbs dust and dirt particles to protect your solvent reservoirs. The vent is universally suitable for all SafetyCaps. It also works with your current SafetyCaps, simply replace the old vent with the new one.
