Model:627A01 - Platinum Stock Products; Low-cost, industrial, quartz shear ICP® accelerometer, 100 mV/g, 0.3 to 10k Hz, top exit, 2-pin connector, single point ISO 17025 accredited calibration_1152204
Representative image only

Model:627A01 - Platinum Stock Products; Low-cost, industrial, quartz shear ICP® accelerometer, 100 mV/g, 0.3 to 10k Hz, top exit, 2-pin connector, single point ISO 17025 accredited calibration

$745.80

The price is inclusive of GST
Broadband Resolution (1) (English)1000 µg
Broadband Resolution (1) (SI)9810 µm/sec<sup>2</sup>
Constant Current Excitation2 to 20 mA
Discharge Time Constant≥0.5 sec
Electrical Connection PositionTop
Electrical Connector2-Pin MIL-C-5015
Electrical Isolation (Case)>100000000 Ohm
Electrical ProtectionRFI/ESD
Enclosure RatingIP68
Excitation Voltage18 to 28 VDC
Frequency Range (±3 dB) (English)20 to 600000 cpm
Frequency Range (±3 dB) (SI)0.33 to 10000 Hz
Housing MaterialStainless Steel
Measurement Range (English)±50 g
Measurement Range (SI)±490 m/s²
Mounting Thread1/4-28 Female
Mounting Torque (English)2 to 5 ft-lb
Mounting Torque (SI)2.7 to 6.8 Nm
Non-Linearity±1 %
Output Bias Voltage8 to 12 VDC
Output Impedance<100 Ohm
Overload Limit (Shock) (English)5000 g pk
Overload Limit (Shock) (SI)49050 m/s² pk
Resonant Frequency (English)1080 kcpm
Resonant Frequency (SI)18 kHz
SealingWelded Hermetic
Sensing ElementQuartz
Sensing GeometryShear
Sensitivity (±15 %) (English)100 mV/g
Sensitivity (±15 %) (SI)10.2 mV/(m/s²)
Settling Time (within 1% of bias)≤10 sec
Size - Height (English)2.06 in
Size - Height (SI)52.3 mm
Size - Hex (English)7/8 in
Size - Hex (SI)22 mm
Spectral Noise (1 kHz) (English)6 µg/√Hz
Spectral Noise (1 kHz) (SI)59 (µm/sec<sup>2</sup>)/√Hz
Spectral Noise (10 Hz) (English)50 µg/√Hz
Spectral Noise (10 Hz) (SI)491 (µm/sec<sup>2</sup>)/√Hz
Spectral Noise (100 Hz) (English)20 µg/√Hz
Spectral Noise (100 Hz) (SI)196 (µm/sec<sup>2</sup>)/√Hz
Temperature Range (English)-65 to +250 °F
Temperature Range (SI)-54 to +121 °C
Transverse Sensitivity≤5 %
Weight (English)3.3 oz
Weight (SI)94 gm
Drawing (PDF)
Product Manual (PDF)
Specifications (PDF)
Overview
Platinum Low-cost Quartz Accelerometer
Platinum Stock Products; Low-cost, industrial, quartz shear ICP® accelerometer, 100 mV/g, 0.3 to 10k Hz, top exit, 2-pin connector, single point ISO 17025 accredited calibration
IMI guarantees this item can ship immediately else shipping is free.This industrial accelerometer features a quartz sensing element. Quartz has superior thermal stability compared to typical ceramic elements.

Product Specifications
 ENGLISHSI 
Performance
    Sensitivity (±15 %)100 mV/g10.2 mV/(m/s²)[1] 
    Measurement Range±50 g±490 m/s² 
    Frequency Range (±3 dB)20 to 600000 cpm0.33 to 10000 Hz[4] 
    Resonant Frequency1080 kcpm18 kHz[2] 
    Broadband Resolution (1)1000 µg9810 µm/sec2[2] 
    Non-Linearity±1 %±1 %[3] 
    Transverse Sensitivity≤5 %≤5 % 
Environmental
    Overload Limit (Shock)5000 g pk49050 m/s² pk 
    Temperature Range-65 to +250 °F-54 to +121 °C 
    Enclosure RatingIP68IP68 
Electrical
    Settling Time (within 1% of bias)≤10 sec≤10 sec 
    Discharge Time Constant≥0.5 sec≥0.5 sec 
    Excitation Voltage18 to 28 VDC18 to 28 VDC 
    Constant Current Excitation2 to 20 mA2 to 20 mA 
    Output Impedance<100><100> 
    Output Bias Voltage8 to 12 VDC8 to 12 VDC 
    Spectral Noise (10 Hz)50 µg/√Hz491 (µm/sec2)/√Hz[2] 
    Spectral Noise (100 Hz)20 µg/√Hz196 (µm/sec2)/√Hz[2] 
    Spectral Noise (1 kHz)6 µg/√Hz59 (µm/sec2)/√Hz[2] 
    Electrical ProtectionRFI/ESDRFI/ESD 
    Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm 
Physical
    Size - Hex7/8 in22 mm 
    Size - Height2.06 in52.3 mm 
    Weight3.3 oz94 gm 
    Mounting Thread1/4-28 Female1/4-28 Female[5] 
    Mounting Torque2 to 5 ft-lb2.7 to 6.8 Nm 
    Sensing ElementQuartzQuartz 
    Sensing GeometryShearShear 
    Housing MaterialStainless SteelStainless Steel 
    SealingWelded HermeticWelded Hermetic 
    Electrical Connector2-Pin MIL-C-50152-Pin MIL-C-5015 
    Electrical Connection PositionTopTop 

All specifications are at room temperature unless otherwise specified.

CE
Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] The high frequency tolerance is accurate within ±10% of the specified frequency.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 for details.
Accessories:
Supplied
081A40Mounting Stud(1)
Optional Versions:
(M) Metric Mount
 ENGLISHSI
Accessories:
    M081A61Mounting Stud(1)

Over 40,000 Customers Trust John Morris