Buy the PCB PIEZOTRONICS , Part number M608A11, Platinum Stock Products; Low-cost, general purpose, industrial ceramic shear ICP® accelerometer, 100 from John Morris Group.

Platinum Stock Products; Low-cost, general purpose, industrial ceramic shear ICP® accelerometer, 100 mV/g, 0.5 to 10k Hz, top exit, 10-ft integral cable, single point ISO 17025 accredited calibration

Product Specifications

	ENGLISH	SI
Performance
Sensitivity (±15 %)	100 mV/g	10.2 mV/(m/s²)	[1]
Measurement Range	±50 g	±490 m/s²
Frequency Range (±3 dB)	30 to 600000 cpm	0.5 to 10000 Hz
Resonant Frequency	1320 kcpm	22 kHz	[2]
Broadband Resolution (1)	350 µg	3434 µm/sec²	[2]
Non-Linearity	±1 %	±1 %	[3]
Transverse Sensitivity	≤7 %	≤7 %
Environmental
Overload Limit (Shock)	5000 g pk	49050 m/s² pk
Temperature Range	-65 to +250 °F	-54 to +121 °C
Enclosure Rating	IP68	IP68
Electrical
Settling Time (within 1% of bias)	≤2.0 sec	≤2.0 sec
Discharge Time Constant	≥0.3 sec	≥0.3 sec
Excitation Voltage	18 to 28 VDC	18 to 28 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	<150>	<150>
Output Bias Voltage	8 to 12 VDC	8 to 12 VDC
Spectral Noise (10 Hz)	8 µg/√Hz	78.5 (µm/sec²)/√Hz	[2]
Spectral Noise (100 Hz)	5 µg/√Hz	49.1 (µm/sec²)/√Hz	[2]
Spectral Noise (1 kHz)	4 µg/√Hz	39.2 (µm/sec²)/√Hz	[2]
Electrical Isolation (Case)	>100000000 Ohm	>100000000 Ohm
Physical
Size - Hex	9/16 in	14 mm
Size - Height	2.5 in	64 mm
Weight (with cable)	3.5 oz	99.3 gm
Mounting	Stud	Stud
Mounting Thread	1/4-28 Female	1/4-28 Female	[4]
Mounting Torque	2 to 5 ft-lb	2.7 to 6.8 Nm
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Stainless Steel	Stainless Steel
Sealing	Molded	Molded
Electrical Connector	Molded Integral Cable	Molded Integral Cable
Electrical Connection Position	Top	Top
Cable Length	10 ft	3 m
Cable Type	Polyurethane	Polyurethane	[5]

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] 1/4-28 has no equivalent in S.I. units.
[5] Twisted shielded pair.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.

Accessories:

Supplied
081A40	Mounting Stud	(1)
ICS-2	NIST-traceable single-axis single-point amplitude response calibration at 6000 cpm (100 Hz)	(1)

Optional Versions:

(EX) Hazardous Area Approval- contact factory for specific approvals

	ENGLISH	SI
Hazardous Area Approval	Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4	Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
Hazardous Area Approval	EEx nL IIC T4, -40°C<><=121â°c, ii="" 3="">	EEx nL IIC T4, -40°C<><=121â°c, ii="" 3="">
Hazardous Area Approval	EEx nL IIC T4, -40°C<><=121â°c, ii="" 1="">	EEx nL IIC T4, -40°C<><=121â°c, ii="" 1="">
Hazardous Area Approval	Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I	Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
Hazardous Area Approval	Ex ia IIC T4, AExia IIC, T4	Ex ia IIC T4, AExia IIC, T4

(LB) Low Bias Voltage

	ENGLISH	SI
Output Bias Voltage	4.8 to 6.5	4.8 to 6.5
Excitation Voltage	12 to 28	12 to 28
Measurement Range	±10	±98

(M) Metric Mount

	ENGLISH	SI


Accessories:
	M081A61	Mounting Stud	(1)

(TO) Temperature Output

	ENGLISH	SI
Temperature Output Range	+36 to +250 °F	+2 to +121 °C
Temperature Scale Factor	5.56 mV/°F + 32	+10 mV/°C
Electrical Connector	Molded Integral Cable	Molded Integral Cable
Electrical Connections (Red)	Acceleration Output	Acceleration Output
Electrical Connections (Black)	Ground	Ground
Electrical Connections (White)	Temperature Output	Temperature Output

ENGLISH

Performance

Sensitivity (±15 %)

100 mV/g

10.2 mV/(m/s²)

[1]

Measurement Range

±50 g

±490 m/s²

Frequency Range (±3 dB)

30 to 600000 cpm

0.5 to 10000 Hz

Resonant Frequency

1320 kcpm

22 kHz

[2]

Broadband Resolution (1)

350 µg

3434 µm/sec²

[2]

Non-Linearity

±1 %

[3]

Transverse Sensitivity

≤7 %

Environmental

Overload Limit (Shock)

5000 g pk

49050 m/s² pk

Temperature Range

-65 to +250 °F

-54 to +121 °C

Enclosure Rating

IP68

Electrical

Settling Time (within 1% of bias)

≤2.0 sec

Discharge Time Constant

≥0.3 sec

Excitation Voltage

18 to 28 VDC

Constant Current Excitation

2 to 20 mA

Output Impedance

<150>

Output Bias Voltage

8 to 12 VDC

Spectral Noise (10 Hz)

8 µg/√Hz

78.5 (µm/sec²)/√Hz

[2]

Spectral Noise (100 Hz)

5 µg/√Hz

49.1 (µm/sec²)/√Hz

[2]

Spectral Noise (1 kHz)

4 µg/√Hz

39.2 (µm/sec²)/√Hz

[2]

Electrical Isolation (Case)

>100000000 Ohm

Physical

Size - Hex

9/16 in

14 mm

Size - Height

2.5 in

64 mm

Weight (with cable)

3.5 oz

99.3 gm

Mounting

Stud

Mounting Thread

1/4-28 Female

[4]

Mounting Torque

2 to 5 ft-lb

2.7 to 6.8 Nm

Sensing Element

Ceramic

Sensing Geometry

Shear

Housing Material

Stainless Steel

Sealing

Molded

Electrical Connector

Molded Integral Cable

Electrical Connection Position

Top

Cable Length

10 ft

3 m

Cable Type

Polyurethane

[5]

ENGLISH

Hazardous Area Approval

Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4

Hazardous Area Approval

EEx nL IIC T4, -40°C<><=121â°c, ii="" 3="">

Hazardous Area Approval

EEx nL IIC T4, -40°C<><=121â°c, ii="" 1="">

Hazardous Area Approval

Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I

Hazardous Area Approval

Ex ia IIC T4, AExia IIC, T4

ENGLISH

Output Bias Voltage

4.8 to 6.5

Excitation Voltage

12 to 28

Measurement Range

±10

±98

ENGLISH

Temperature Output Range

+36 to +250 °F

+2 to +121 °C

Temperature Scale Factor

5.56 mV/°F + 32

+10 mV/°C

Electrical Connector

Molded Integral Cable

Electrical Connections (Red)

Acceleration Output

Electrical Connections (Black)

Ground

Electrical Connections (White)

Temperature Output

Model:M608A11 - Platinum Stock Products; Low-cost, general purpose, industrial ceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, top exit, 10-ft integral cable, M6 mounting stud, single point ISO 17025 accredited calibration

$367.40

Over 40,000 Customers Trust John Morris