Model:086D05 - Modally Tuned® Impulse Hammer w/force sensor and tips, 0 to 5k lbf, 1 mV/lbf (0.23 mV/N)_1102934
Representative image only

Model:086D05 - Modally Tuned® Impulse Hammer w/force sensor and tips, 0 to 5k lbf, 1 mV/lbf (0.23 mV/N)

$2,385.90

The price is inclusive of GST
Constant Current Excitation2 to 20 mA
Discharge Time Constant≥2000 sec
Electrical Connection PositionBottom of Handle
Electrical ConnectorBNC Jack
Excitation Voltage20 to 30 VDC
Extender Mass Weight (English)7.0 oz
Extender Mass Weight (SI)200 gm
Hammer Length (English)9.0 in
Hammer Length (SI)22.7 cm
Hammer Mass (English)0.7 lb
Hammer Mass (SI)0.32 kg
Head Diameter (English)1.0 in
Head Diameter (SI)2.5 cm
Measurement Range (English)±5000 lbf pk
Measurement Range (SI)±22240 N pk
Non-Linearity≤1 %
Output Bias Voltage8 to 14 VDC
Output Impedance<100 Ohm
Resonant Frequency≥22 kHz
SealingEpoxy
Sensing ElementQuartz
Sensitivity (±15 %) (English)1 mV/lbf
Sensitivity (±15 %) (SI)0.23 mV/N
Tip Diameter (English)0.25 in
Tip Diameter (SI)0.63 cm
Drawing (PDF)
Overview
Impact Hammer, ICP®
Modally Tuned® Impulse Hammer w/force sensor and tips, 0 to 5k lbf, 1 mV/lbf (0.23 mV/N)


Product Specifications
 ENGLISHSI 
Performance
    Sensitivity (±15 %)1 mV/lbf0.23 mV/N 
    Measurement Range±5000 lbf pk±22240 N pk 
    Resonant Frequency≥22 kHz≥22 kHz 
    Non-Linearity≤1 %≤1 % 
Electrical
    Excitation Voltage20 to 30 VDC20 to 30 VDC 
    Constant Current Excitation2 to 20 mA2 to 20 mA 
    Output Impedance<100><100>[1] 
    Output Bias Voltage8 to 14 VDC8 to 14 VDC 
    Discharge Time Constant≥2000 sec≥2000 sec[1] 
Physical
    Sensing ElementQuartzQuartz 
    SealingEpoxyEpoxy 
    Hammer Mass0.7 lb0.32 kg 
    Head Diameter1.0 in2.5 cm 
    Tip Diameter0.25 in0.63 cm 
    Hammer Length9.0 in22.7 cm 
    Electrical Connection PositionBottom of HandleBottom of Handle 
    Extender Mass Weight7.0 oz200 gm 
    Electrical ConnectorBNC JackBNC Jack 

All specifications are at room temperature unless otherwise specified.

CE
Product Notes
[1] Typical.
[2] See PCB Declaration of Conformance PS068 for details.
Accessories:
Supplied
081B05Mounting Stud (10-32 to 10-32)(2)
084A09Extender - steel, 1.0" diameter(1)
084A50Tip - super soft- Grey 15.101 1" 10SS(1)
084A51Adaptor for 084A50(1)
084B03Hard Tip- Hard (S.S)(1)
084B04Hammer Tip- Medium (White Plastic)(1)
084C05Hammer Tip- Soft (Black)(2)
085A10Vinyl Cover For Medium Tip (Blue)(2)
HCS-2Calibration of Series 086 instrumented impact hammers(1)
Optional Versions:
(T) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4
 ENGLISHSI
(TLD) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4
 ENGLISHSI

Over 40,000 Customers Trust John Morris