Masterflex L/S Digital-Coat Precision Process Pump with Open-Head Sensor and Easy-Load II Pump Head (thin wall), 100 rpm_1218681
Representative image only

Masterflex L/S Digital-Coat Precision Process Pump with Open-Head Sensor and Easy-Load II Pump Head (thin wall), 100 rpm

Control typeVariable-Speed Digital
DescriptionDigital-Coat Precision Process Pump with Open-Head Sensor and Easy-Load II Pump Head (thin wall), 100 rpm
Drive07528-55 (L/S® Precision Process Drive)
Housing MaterialStainless Steel
Max Flow Rate (mLmin)80
Max Flow Rate Per Channel (mLmin)80
Max rpm100
Min Flow Rate (mLmin)0.8
Min Flow Rate Per Channel (mLmin)0.8
Min RPM1
Open-Head SensorYes
Power (Amps)2.2 / 1.1
Power (Hz)50/60
Power (VAC)90 to 260
Pump head77200-30 (L/S® Easy-Load II pump head)
Pump SeriesL/S
Tubing06434-16, 10 ft (C-FLEX ULTRA®, L/S® 16 )
Overview
  • Precise speed control and digital display of rpm in process and washdown applications
  • Flow rate 0.06 to 3400 mL/min (depends on drive rpm and tubing size)
  • NEMA 4X (IP66) rated housing
  • Four-digit LED display shows motor rpm—confirm speed setting at a glance
  • Integrated open-head sensor stops drive motor when pump head is opened
  • Reversible motor—purge tubing before or after pumping; pump fluid in either direction
  • LED indicators confirm motor direction
  • Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications
  • Separate speed and power (on/off) control—maintain speed setting while turning pump on/off
  • Remote control capabilities via a watertight connector on back of drive
  • – Speed control input: 4 to 20 mA or 0 to 10 VDC
  • – Pump direction (CW/CCW) via open collector or contact closure
  • – Start/stop via open collector or contact closure
  • Membrane keypad for easy up-front control of speed, direction, and start/stop

These accurate console drives have powerful motors, speed display, and ±0.25% speed control for precise flow regulation—ideal for metering applications. Remote speed control requires cable assembly 77300-32.

Complete pump system includes open-head sensor equipped Easy-Load II pump head.

Whats Included:

Drive, pump head, tubing, and 6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

Over 40,000 Customers Trust John Morris