Hot and Cold Plate_1116830
Representative image only

Hot and Cold Plate

$5,805.80

The price is inclusive of GST
Overview

Atlas Vial and Round Bottom Flask Systems

A variety of dry bath options fit onto the hotplate and magnetic stirrer for single round bottom flasks or parallel flasks or vials are available with the standard Atlas base. For cooled reactions, the hotplate can be removed and a cold plate fitted.

The Stacking Atlas Dry Bath has concentric cups allowing round bottom flasks from 50ml to 1 litre to be heated or cooled.

A triple dry bath is available for flasks from 50ml to 250ml and the Atlas Vial Baths can conveniently heat or cool a wide range of reaction vials. The Atlas Orbit can heat 6 or 12 reaction tubes with a reflux in an inert atmosphere. The base can automatically run reaction profiles and add reagents.

 

Hot and Cold Plate

The Atlas Hot and Cold Plate is an easy and accurate way of heating and cooling reactions in flasks or vials. Designed to fit on the Atlas Base, the Hot and Cold Plate connects to a recirculating heater/cooler to provide temperature control from -40°C to +160°C. When a controllable circulator is connected to the Atlas Base, the Hot and Cold Plate or reaction can be accurately controlled to the temperature set on the Atlas Base.

  • Easy to use: The Hot and Cold Plate is connected to the Atlas Base using a bayonet fitting and is interchangeable with the standard Atlas Hot Plate.
  • Compatible with a range of accessories: The Hot and Cold plate has a standard diameter of 13.5 cm (5/16”).  This is compatible with the Atlas Stacking Dry Bath, Triple Dry Bath, Vial Baths, Orbit Parallel Reaction Station and virtually all other products designed to fit on hotplates.
  • Integrated stirring: The Atlas Magnetic Stirrer module screws directly into the Hot and Cold Plate to provide high quality magnetic stirring.
  • Accurate temperature control: The Hot and Cold Plate has an embedded RTD allowing feedback of plate temperature. Alternatively a PTFE coated RTD can be inserted in the reaction and that temperature controlled.
  • Easy connection: The Hot and Cold Plate can be used with either standard M16 fittings or Atlas Quick Circulator Connecters which require no tools for a leak free rapid connection.
  • Icing issues minimised: An integrated drip tray collects condensation and melting ice. A cover is also available to minimise ice build-up.
  • Chemically resistant: The anodised aluminium plate provides a “wipe clean” surface.
  • Wide temperature range: Fully tested between -40°C and 160°C.
  • Temperatures logged: The temperature of the Hot and Cold plate is fully logged (as with all data on an Atlas System) and can be downloaded to a USB stick for offline analysis.

 

Circulators that can be controlled by the Atlas Base

The Atlas Base Unit can be used to directly control the following circulators (note that other types of circulator can be controlled using the Atlas Software or used without feedback control): Huber Unistat 340, Huber Ministat CC230, Huber Tango Nuevo, Julabo (All modern Julabo circulators can be controlled from the Atlas front panel).

 

Parts List

Description Part Number
Hot and Cold Plate 2200047
Large Vial Bath Cold Cover 6 x 28mm dia 2200058
Medium Vial Bath Cover 8 x 20mm dia 2200057
Small Vial Bath Cover 12 x 17mm dia 220005

Over 40,000 Customers Trust John Morris