FLOMETR 3/4"MNPT 0.5-4GPM V.A._1085973
Representative image only

FLOMETR 3/4"MNPT 0.5-4GPM V.A.

Accuracy±5% full-scale
DescriptionFlowmeter, spring-loaded in-line, for water, 3/4" NPT(M), 0.5 to 4 gpm
Fluid Typewater
Height (Inch)8.25
Material FittingPolysulfone
Material Float316 Stainless Steel
Material HousingPolysulfone
Material O-RingBuna N
Max flow rate (GPM)4
Max flow rate (LPM)15
Max Operating Temperature (DegreeC)121
Max Operating Temperature (DegreeF)250
Max pressure (psi)325
Min flow rate (GPM)0.5
Min flow rate (LPM)2
Pressure drop at maximum flow (PSID)1
Process connection3/4" NPT(M)
Process Connection (NPTM)0.75
Repeatability±1%
Overview
  • Provide accurate readings while mounted in any position
  • Rugged design resists shock and vibration
  • Control pumps or valves with an optional limit switch

These economical flowmeters are built with a spring-retained piston for direct, accurate readings regardless of the position you mount them. Use them to monitor hydraulic systems or chemical processes; the meters also work well to check pump and control valve performance.

Note: Polysulfone is not suited for direct contact with sunlight.


Considering limit switches? Use to provide an output signal at a setpoint anywhere between 0 to 100% of full-scale. Use to control small pumps, valves, or alarms or to interface with a PLC.

Over 40,000 Customers Trust John Morris