PUMP VACUUM 5.6 CFM 220V/50HZ_1174813
Representative image only

PUMP VACUUM 5.6 CFM 220V/50HZ

DescriptionRotary vane vacuum pump for corrosive gases, 5.6 cfm, 230 VAC
Duty cycleContinuous
Free Air Capacity (CFM)5.6
Free Air Capacity (LPM)158
Height (cm)40
Height (InchShort)15.75
Inlet PortNW 25 flange and 13/16" hosebarb
Length (cm)48.9
Length (InchShort)19.25
Max Temperature (DegreeC)63
Max Temperature (DegreeF)145
Max Vacuum (withballast)3 x 10-2 mm Hg
Max Vacuum (withoutballast)3 x 10-3 mm Hg
Motor hp1/2
Motor TypeODP
Noise level59 dB(A)
Oil Capacity (Liters)2.1
Oil Capacity (oz)72
Outlet portNW 25 flange and 13/16" hosebarb
Power (Amps)2.8
Power (Hz)50
Power (VAC)230
Wetted partsVITON® fluoroelastomer resin, PTFE black grade S resin, chemical-resistant cast iron, stainless steel, and nickel plated or anodized steel
Width (cm)36.2
Width (InchShort)14.25
View Virtual Catalog - English - gy44-1045.pdf
Overview
  • Corrosion-resistant parts—ideal for pumping corrosive gases such as Cl2, HBr, F3CCO2H, and HOAC
  • Pumps draw clean oil from top of oil reservoir, not from the bottom as do direct-drive pumps
  • Large oil reservoir dilutes contaminants
  • Lower pump speed (less than 580 rpm) results in less wear, cooler operation, and longer service life
  • Bubbler tube in the oil reservoir allows nitrogen gas purging, resulting in lower operating temperature, reduced corrosion rate, and extended pump oil life

Pumps include a clamp, centering ring, NW flange to hose barb fitting, pump oil, and an instruction manual containing an applications booklet.

Ulitimate total vacuum
Pumps include NW flange to hose barb adapters.

Over 40,000 Customers Trust John Morris