Julabo, Recirculating Cooler, FL2506, -15 to +40°C, ±0.5°C, 60 l/min, 0.5 to 6 bar, 60 x 76 x 115 cm_1175418
Representative image only

Julabo, Recirculating Cooler, FL2506, -15 to +40°C, ±0.5°C, 60 l/min, 0.5 to 6 bar, 60 x 76 x 115 cm

Ambient Temperature5...40 °C
Available voltage versions230 V / 50 Hz ; 230 V / 60 Hz
Barbed Fittings Diameter (inner dia. / mm)1
Cooling Capacity2.5 kW @ 20 °C ; 1.9 kW @ 10 °C ; 1 kW @ 0 °C ; 0.3 kW @ -10 °C
Cooling of compressorAir
Digital InterfaceRS232, Optional Profibus
Dimensions W x L x H (cm)60 x 76 x 115
Filling Volume Liters24 ... 30
Included With Each Unit2 each barbed fittings for tubing 1 inner dia (pumpconnections G1 1/4 male)
Pump Capacity Flow Pressure (bar)0.5-6.0
Pump capacity flow rate (l/min)60
Pump ConnectionsG1 1/4
Setting / Display Resolution0.1 °C
Temperature ControlPID temperature control
Temperature DisplayLED
Temperature Stability (°C)±0.5
Weight (kg)130
Working temperature range (°C)-15 ... +40
JULABO-FL2506--9666025.pdf
Overview
The FL series offers a new generation of chillers for routine cooling applications within the laboratory and industry. The temperature stability of the PID control is ±0.5°C. All units can easily be cleaned and are provided with a splash water proof keypad with LED temperature indication. On the front of the units there is an RS232 interface as well as an alarm shutdown. The filling port is easily accessible placed on the top under a lift-up cover. Another hinged tray serves as a file for the operating manual or other documents concerning the installation. The removable venting grid allows an easy cleaning of the condenser, the drain tap is easily accessible behind the grid. All models include an easily visible level indication. Another advantage is the venting slots are on the front and rear and therefore the units can be placed directly one beside the other (space saving).  

  • Ergonomic design and easy operation
  • Splash-proof keypad with integrated mains switch
  • Large, bright LED display
  • Reliable Microprocessor PID temperature control
  • Filling level indicator
  • Powerful immersion pumps, suitable for continuous operation
  • Permissible temperature in return line +80°C
  • Easy filling from the top with hinged protective lid
  • Low liquid level protection with optical and audible alarm signal
  • Integrated stainless steel bath tanks
  • Removable venting grid for cleaning of the condenser
  • Front drain
  • No side vents
  • RS232 interface for PC-connection
  • IP class according to IEC 60529: 21
  • Alarm output, potential-free change-over contact (max. 30 VA)
  • Pump pressure indicator
  • By-pass valve to adjust pum pressure

Over 40,000 Customers Trust John Morris