- Precise counting: The automatic optimisation of reference weight gradually improves the average value of the piece weight
- Programmable using numerical key pad:
- - required reference quantity
- - known reference weight
- Three displays for
- - Weight (verifiable)
- - Reference weight
- - Total weight
- Audible Fill-to-target: target quantity or target weight can be programmed. When the target value is reached, a signal will sound
- Counting results memory: adds up all individual counting operations, result is shown in total weight and total pieces
- Energy management: Backlight turns off after 5 sec
- Soil-resistant construction with water channels at the edge of the housing and sealing rings over the upper housing inlets
- PRE-TARE function for manual subtraction of a known container weight, which can be saved| Note: In commercial trade, official verification duties exist|
- *Optional Dakks Calibration/Verification certificate available on request
Representative image only
Counting scale 0.5 g 6 kg *Optional Dakks Calibration/Verification certificate available on request
$843.70
Charging time8 h
Dimensions housing (WxDxH)300 mm x 330 mm x 110 mm
Dimensions packaging (WxDxH)380 mm x 400 mm x 175 mm
Display digit height1,800 cm
DKD Certificate963-128 (*Optional)
Environment max. humidity0.85
Environment max. temperature40 °C
Environment min. temperature-10.000000000000000 °C
Gross Weight5,170 kg
Input Voltage220 V - 240 V AC 50 Hz
Linearity1 g
Material weighing platestainless steel
Mininum piece weight at piece counting200 mg
Mininum piece weight at piece counting2200 mg
Net Weight3,980 kg
Operating time (Backlight on)60 h
Readout [d]500 mg
Reference quantityfree
Reproducibility500 mg
Stabilisation time2 s
Weighing area (WxD)300 mm x 220 mm
Weighing Range [Max]6 kg
Weighing systemStrain gauge
Weighing unitsg
CXB_CXP-BA-e-1417-John-Morris.pdf
sl-cxb-gb-John-Morris.pdf
Overview
- Precise counting: The automatic optimisation of reference weight gradually improves the average value of the piece weight
- Programmable using numerical key pad:
- - required reference quantity
- - known reference weight
- Three displays for
- - Weight (verifiable)
- - Reference weight
- - Total weight
- Audible Fill-to-target: target quantity or target weight can be programmed. When the target value is reached, a signal will sound
- Counting results memory: adds up all individual counting operations, result is shown in total weight and total pieces
- Energy management: Backlight turns off after 5 sec
- Soil-resistant construction with water channels at the edge of the housing and sealing rings over the upper housing inlets
- PRE-TARE function for manual subtraction of a known container weight, which can be saved| Note: In commercial trade, official verification duties exist|
- *Optional Dakks Calibration/Verification certificate available on request