FLOWMETER LIQUID VOLUME 5 SCCM_1142293
Representative image only

FLOWMETER LIQUID VOLUME 5 SCCM

$7,837.50

The price is inclusive of GST
Accuracy ±2
CertifiedYes
CommunicationsRS-232
DescriptionFlowmeter, volumetric, for water, 0 to 5 mL/min
Display Type7-line x 4-digit LCD; 0.25"H flow display
Electrical Connections8-pin circular mini-DIN
Fluid TypeLiquid
Gas typeDI water
Max Flow Rate (mLmin)5
Max Operating Temperature (DegreeC)50
Max Operating Temperature (DegreeF)122
Max Water Flow Rate (mLmin)5
Media TypeWater
Min Flow Rate (mLmin)0
Min Operating Temperature (DegreeC)10
Min Operating Temperature (DegreeF)50
Output0 to 5 VDC
Output (Voltage)Yes
Repeatability±2% full-scale
Turn-down ratio50:1
Instruction Manual
View Virtual Catalog - English - gy44-0377.pdf
Overview
  • Achieve accurate, ultrafast volumetric measurement and control
  • Technology allows for installation without typical inlet/outlet straight-run requirements
  • Units provide data on flow and temperature
  • All functions are user-programmable through an integrated keypad

More details for Cole-Parmer Flowmeters and Controllers:
These meters measure flow via pressure drop across a laminar flow element (LFE). Because the flow element makes the flow stream laminar, placement in the process does not require straight pipe runs upstream or downstream of the meter, greatly simplifying installation. The LFEs also provide an outstanding turndown ratio of 50:1 giving the meter a very broad and accurate measuring range. The design provides an ultrafast response at start-up or input change—often within 100 milliseconds. The 0 to 5 VDC output allows transmission of the flow
value to a remote display, recorder, or controller regulating a valve or pump.

For the flow controllers, an integrated PID controller directs the unit's response to process changes. Set the P and D parameters to tailor the unit's response. Flow setpoint is established with the optional set point control module, a 0 to 5 V signal, or an RS-232 input signal. For portable flow metering (not controlling) applications, order the battery pack listed below. Units can be mounted via threaded taps in the meter body.

Meters and controllers feature dynamic display that simultaneously shows flow rate and fluid temperature, and (for controllers) the set point. For the units shown, both power and input/output signals are transmitted through a single multi-pin connector.

Whats Included:

What’s included: integrated sensor, display, and transmitter; controllers add the valve assembly. All models include a 120/230 VAC power adapter with communications cable, and NIST-traceable calibration report supplied by the manufacturer.

Over 40,000 Customers Trust John Morris