Enquiry sent successfully
Product Enquiry
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: Masterflex
JMG No: 1109569
Part No: 77301-50
UNSPSC: 41105102
Type: Instrument
Availability: 2-3 Weeks
  • Precision digital drives offer three dispensing modes and precision low-maintenance motors— modular format lets you place motor and controller where convenient
  • Flow rate 0.0012 to 3400 mL/min with L/S tubing. Flow rate depends on drive rpm and tubing size.
  • Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually.
  • Menu-driven interface lets you select one of seven languages for programming and operation
  • Dispense by Volume in mL (0.001 to 99999 mL), L, or gal; Copy—1 to 9,999 dispense cycles; or Time—time interval of on/off cycles (1 sec to 99 hr, 59 min, 59 sec per cycle)
  • Antidrip function ensures dispense accuracy
  • Reversible motor—purge tubing before or after pumping; pump fluid in either direction
  • Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio
  • Powerful motors let you stack pump heads for increased flow rates and for multichannel applications
  • Remote control capabilities
  • – Speed control input scalable 0 to 20 mA, 4 to 20 mA, or 0 to 10 V
  • – Pumping direction requires open collector or contact closure
  • – Start/stop/purge requires open collector or contact closure
  • – Tachometer output scalable 0 to 20 mA, 4 to 20 mA, 0 to 10 V, open collector
  • Wall-mount controller housing is powder-coated aluminum, NEMA4X (IP66) rated for washdown; powder-coated steel drive housing is NEMA4X (IP66) rated for washdown
  • 6-ft (1.8-m) cable connects drive and controller
  • Remote control capabilities via weather-resistant connection on controller

These precision drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing by time or by volume. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size. Program the drive via the simple membrane keypad; keypad lock/unlock feature protects settings.

Whats Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

Control type Digital Variable Speed
Digital dispensing Yes
Housing Material Painted Aluminum Controller; Painted Steel and Aluminum Drive
Motor hp 1/10
Open-Head Sensor No
Power (Hz) 50/60
Remote I/O 0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
Reversible motor Yes
Speed Variable
Speed Control ±0.1% (0.1 rpm at 600 rpm)
Type of Pump heads accepted Standard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm
Washdown capable Yes
Description L/S Digital Modular Washdown Drive w/ Remote I/O; 600 rpm
Controller Height (InchShort) 4.75
Controller Width (InchShort) 11
Controller Width (mm) 279
Drive Height (InchShort)
Min RPM (rpm) 0.1
Motor IP rating IP 66
Motor Length (InchShort) 14.25
No. of Pump heads accepted 2
Power (Amps) 2.2
Power (VAC) 90 to 260
Controller Height (mm) 119
Controller Length (InchShort) 10.1562
Controller Length (mm) 285
Drive Height (mm)
Drive Length (mm)
Drive Width (InchShort)
Max Flow Rate (mLmin) 3400
Motor Length (mm) 362
Motor Width (InchShort) 7
Controller IP rating IP 66
Max RPM (rpm) 600
Motor Height (mm) 165
Pump Series L/S
Drive Length (InchShort)
Drive Width (mm)
Min Flow Rate (mLmin) 0.006
Motor Height (InchShort) 6.5
Motor (watts) 75
Motor Width (mm) 178
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: Masterflex
JMG No: 1109569
Part No: 77301-50
UNSPSC: 41105102
Type: Instrument
Availability: 2-3 Weeks
  • Precision digital drives offer three dispensing modes and precision low-maintenance motors— modular format lets you place motor and controller where convenient
  • Flow rate 0.0012 to 3400 mL/min with L/S tubing. Flow rate depends on drive rpm and tubing size.
  • Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually.
  • Menu-driven interface lets you select one of seven languages for programming and operation
  • Dispense by Volume in mL (0.001 to 99999 mL), L, or gal; Copy—1 to 9,999 dispense cycles; or Time—time interval of on/off cycles (1 sec to 99 hr, 59 min, 59 sec per cycle)
  • Antidrip function ensures dispense accuracy
  • Reversible motor—purge tubing before or after pumping; pump fluid in either direction
  • Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio
  • Powerful motors let you stack pump heads for increased flow rates and for multichannel applications
  • Remote control capabilities
  • – Speed control input scalable 0 to 20 mA, 4 to 20 mA, or 0 to 10 V
  • – Pumping direction requires open collector or contact closure
  • – Start/stop/purge requires open collector or contact closure
  • – Tachometer output scalable 0 to 20 mA, 4 to 20 mA, 0 to 10 V, open collector
  • Wall-mount controller housing is powder-coated aluminum, NEMA4X (IP66) rated for washdown; powder-coated steel drive housing is NEMA4X (IP66) rated for washdown
  • 6-ft (1.8-m) cable connects drive and controller
  • Remote control capabilities via weather-resistant connection on controller

These precision drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing by time or by volume. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size. Program the drive via the simple membrane keypad; keypad lock/unlock feature protects settings.

Whats Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

Control type Digital Variable Speed
Digital dispensing Yes
Housing Material Painted Aluminum Controller; Painted Steel and Aluminum Drive
Motor hp 1/10
Open-Head Sensor No
Power (Hz) 50/60
Remote I/O 0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
Reversible motor Yes
Speed Variable
Speed Control ±0.1% (0.1 rpm at 600 rpm)
Type of Pump heads accepted Standard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm
Washdown capable Yes
Description L/S Digital Modular Washdown Drive w/ Remote I/O; 600 rpm
Controller Height (InchShort) 4.75
Controller Width (InchShort) 11
Controller Width (mm) 279
Drive Height (InchShort)
Min RPM (rpm) 0.1
Motor IP rating IP 66
Motor Length (InchShort) 14.25
No. of Pump heads accepted 2
Power (Amps) 2.2
Power (VAC) 90 to 260
Controller Height (mm) 119
Controller Length (InchShort) 10.1562
Controller Length (mm) 285
Drive Height (mm)
Drive Length (mm)
Drive Width (InchShort)
Max Flow Rate (mLmin) 3400
Motor Length (mm) 362
Motor Width (InchShort) 7
Controller IP rating IP 66
Max RPM (rpm) 600
Motor Height (mm) 165
Pump Series L/S
Drive Length (InchShort)
Drive Width (mm)
Min Flow Rate (mLmin) 0.006
Motor Height (InchShort) 6.5
Motor (watts) 75
Motor Width (mm) 178
Related Products
JMG Part No. 1015277
JMG Part No. 1252849

Masterflex L/S Digital Modular Washdown Drive with Remote I/O; 600 rpm

OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: Masterflex
JMG No: 1109569
Part No: 77301-50
UNSPSC: 41105102
Type: Instrument
Availability: 2-3 Weeks
  • Precision digital drives offer three dispensing modes and precision low-maintenance motors— modular format lets you place motor and controller where convenient
  • Flow rate 0.0012 to 3400 mL/min with L/S tubing. Flow rate depends on drive rpm and tubing size.
  • Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually.
  • Menu-driven interface lets you select one of seven languages for programming and operation
  • Dispense by Volume in mL (0.001 to 99999 mL), L, or gal; Copy—1 to 9,999 dispense cycles; or Time—time interval of on/off cycles (1 sec to 99 hr, 59 min, 59 sec per cycle)
  • Antidrip function ensures dispense accuracy
  • Reversible motor—purge tubing before or after pumping; pump fluid in either direction
  • Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio
  • Powerful motors let you stack pump heads for increased flow rates and for multichannel applications
  • Remote control capabilities
  • – Speed control input scalable 0 to 20 mA, 4 to 20 mA, or 0 to 10 V
  • – Pumping direction requires open collector or contact closure
  • – Start/stop/purge requires open collector or contact closure
  • – Tachometer output scalable 0 to 20 mA, 4 to 20 mA, 0 to 10 V, open collector
  • Wall-mount controller housing is powder-coated aluminum, NEMA4X (IP66) rated for washdown; powder-coated steel drive housing is NEMA4X (IP66) rated for washdown
  • 6-ft (1.8-m) cable connects drive and controller
  • Remote control capabilities via weather-resistant connection on controller

These precision drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing by time or by volume. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size. Program the drive via the simple membrane keypad; keypad lock/unlock feature protects settings.

Whats Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

Control type Digital Variable Speed
Digital dispensing Yes
Housing Material Painted Aluminum Controller; Painted Steel and Aluminum Drive
Motor hp 1/10
Open-Head Sensor No
Power (Hz) 50/60
Remote I/O 0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
Reversible motor Yes
Speed Variable
Speed Control ±0.1% (0.1 rpm at 600 rpm)
Type of Pump heads accepted Standard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm
Washdown capable Yes
Description L/S Digital Modular Washdown Drive w/ Remote I/O; 600 rpm
Controller Height (InchShort) 4.75
Controller Width (InchShort) 11
Controller Width (mm) 279
Drive Height (InchShort)
Min RPM (rpm) 0.1
Motor IP rating IP 66
Motor Length (InchShort) 14.25
No. of Pump heads accepted 2
Power (Amps) 2.2
Power (VAC) 90 to 260
Controller Height (mm) 119
Controller Length (InchShort) 10.1562
Controller Length (mm) 285
Drive Height (mm)
Drive Length (mm)
Drive Width (InchShort)
Max Flow Rate (mLmin) 3400
Motor Length (mm) 362
Motor Width (InchShort) 7
Controller IP rating IP 66
Max RPM (rpm) 600
Motor Height (mm) 165
Pump Series L/S
Drive Length (InchShort)
Drive Width (mm)
Min Flow Rate (mLmin) 0.006
Motor Height (InchShort) 6.5
Motor (watts) 75
Motor Width (mm) 178
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: Masterflex
JMG No: 1109569
Part No: 77301-50
UNSPSC: 41105102
Type: Instrument
Availability: 2-3 Weeks
  • Precision digital drives offer three dispensing modes and precision low-maintenance motors— modular format lets you place motor and controller where convenient
  • Flow rate 0.0012 to 3400 mL/min with L/S tubing. Flow rate depends on drive rpm and tubing size.
  • Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually.
  • Menu-driven interface lets you select one of seven languages for programming and operation
  • Dispense by Volume in mL (0.001 to 99999 mL), L, or gal; Copy—1 to 9,999 dispense cycles; or Time—time interval of on/off cycles (1 sec to 99 hr, 59 min, 59 sec per cycle)
  • Antidrip function ensures dispense accuracy
  • Reversible motor—purge tubing before or after pumping; pump fluid in either direction
  • Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio
  • Powerful motors let you stack pump heads for increased flow rates and for multichannel applications
  • Remote control capabilities
  • – Speed control input scalable 0 to 20 mA, 4 to 20 mA, or 0 to 10 V
  • – Pumping direction requires open collector or contact closure
  • – Start/stop/purge requires open collector or contact closure
  • – Tachometer output scalable 0 to 20 mA, 4 to 20 mA, 0 to 10 V, open collector
  • Wall-mount controller housing is powder-coated aluminum, NEMA4X (IP66) rated for washdown; powder-coated steel drive housing is NEMA4X (IP66) rated for washdown
  • 6-ft (1.8-m) cable connects drive and controller
  • Remote control capabilities via weather-resistant connection on controller

These precision drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing by time or by volume. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size. Program the drive via the simple membrane keypad; keypad lock/unlock feature protects settings.

Whats Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

Control type Digital Variable Speed
Digital dispensing Yes
Housing Material Painted Aluminum Controller; Painted Steel and Aluminum Drive
Motor hp 1/10
Open-Head Sensor No
Power (Hz) 50/60
Remote I/O 0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
Reversible motor Yes
Speed Variable
Speed Control ±0.1% (0.1 rpm at 600 rpm)
Type of Pump heads accepted Standard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm
Washdown capable Yes
Description L/S Digital Modular Washdown Drive w/ Remote I/O; 600 rpm
Controller Height (InchShort) 4.75
Controller Width (InchShort) 11
Controller Width (mm) 279
Drive Height (InchShort)
Min RPM (rpm) 0.1
Motor IP rating IP 66
Motor Length (InchShort) 14.25
No. of Pump heads accepted 2
Power (Amps) 2.2
Power (VAC) 90 to 260
Controller Height (mm) 119
Controller Length (InchShort) 10.1562
Controller Length (mm) 285
Drive Height (mm)
Drive Length (mm)
Drive Width (InchShort)
Max Flow Rate (mLmin) 3400
Motor Length (mm) 362
Motor Width (InchShort) 7
Controller IP rating IP 66
Max RPM (rpm) 600
Motor Height (mm) 165
Pump Series L/S
Drive Length (InchShort)
Drive Width (mm)
Min Flow Rate (mLmin) 0.006
Motor Height (InchShort) 6.5
Motor (watts) 75
Motor Width (mm) 178
Enquiry sent successfully
Product Enquiry
Related Products
JMG Part No. 1015277
JMG Part No. 1252849