Enquiry sent successfully
Product Enquiry
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Masterflex
JMG No: 1109566
Part No: 77301-40
UNSPSC: 41105102
Type: Instrument
Availability: Call For ETA
  • Precision digital drives offer three dispensing modes and precision low-maintenance motors— modular format lets you place motor and controller where convenient
  • Flow rate 0.0012 to 3400 mL/min with L/S tubing. Flow rate depends on drive rpm and tubing size.
  • Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually.
  • Menu-driven interface lets you select one of seven languages for programming and operation
  • Dispense by Volume in mL (0.001 to 99999 mL), L, or gal; Copy—1 to 9,999 dispense cycles; or Time—time interval of on/off cycles (1 sec to 99 hr, 59 min, 59 sec per cycle)
  • Antidrip function ensures dispense accuracy
  • Reversible motor—purge tubing before or after pumping; pump fluid in either direction
  • Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio
  • Powerful motors let you stack pump heads for increased flow rates and for multichannel applications
  • Remote control capabilities
  • – Speed control input scalable 0 to 20 mA, 4 to 20 mA, or 0 to 10 V
  • – Pumping direction requires open collector or contact closure
  • – Start/stop/purge requires open collector or contact closure
  • – Tachometer output scalable 0 to 20 mA, 4 to 20 mA, 0 to 10 V, open collector
  • Stackable, splash-resistant ABS plastic controller housing is IP33 rated; drive housing is epoxy finished steel, IP33 rated
  • 6-ft (1.8-m) cable connects drive and controller
  • Remote control capabilities via a DB25 female connector on back of controller

These precision drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing by time or by volume. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size. Program the drive via the simple membrane keypad; keypad lock/unlock feature protects settings.

Whats Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

Control type Digital Variable Speed
Digital dispensing Yes
Housing Material ABS Plastic and Aluminum Controller; Painted Steel Drive
Motor hp 1/10
Open-Head Sensor No
Power (Hz) 50/60
Remote I/O 0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
Reversible motor Yes
Speed Variable
Speed Control ±0.1% (0.1 rpm at 600 rpm)
Type of Pump heads accepted Standard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm
Description L/S Digital Modular Drive w/ Remote I/O; 600 rpm
Controller Height (InchShort) 5.5
Controller Width (InchShort) 8.3281
Controller Width (mm) 211
Drive Height (InchShort)
Min RPM (rpm) 0.1
Motor IP rating IP 33
Motor Length (InchShort) 8.75
No. of Pump heads accepted 2
Power (Amps) 2.2
Power (VAC) 90 to 260
Controller Height (mm) 140
Controller Length (InchShort) 10.3437
Controller Length (mm) 263
Drive Height (mm)
Drive Length (mm)
Drive Width (InchShort)
Max Flow Rate (mLmin) 3400
Motor Length (mm) 222
Motor Width (InchShort) 3.7968
Controller IP rating IP 33
Max RPM (rpm) 600
Motor Height (mm) 120
Pump Series L/S
Drive Length (InchShort)
Drive Width (mm)
Min Flow Rate (mLmin) 0.006
Motor Height (InchShort) 4.75
Motor (watts) 75
Motor Width (mm) 97
Since we have got around 12-15 units of model 77301-20. Does the new model 77301-40 is compatible ie drive and controller are interchangeable with the earlier model 77301-20.
Answer
The older controllers and motors from the are not compatible with the new model controllers and motors. You would not be able to mix and match the components of the different generations of drives.Answered on 4/10/2013 by Mike S from Technical Support
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Masterflex
JMG No: 1109566
Part No: 77301-40
UNSPSC: 41105102
Type: Instrument
Availability: Call For ETA
  • Precision digital drives offer three dispensing modes and precision low-maintenance motors— modular format lets you place motor and controller where convenient
  • Flow rate 0.0012 to 3400 mL/min with L/S tubing. Flow rate depends on drive rpm and tubing size.
  • Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually.
  • Menu-driven interface lets you select one of seven languages for programming and operation
  • Dispense by Volume in mL (0.001 to 99999 mL), L, or gal; Copy—1 to 9,999 dispense cycles; or Time—time interval of on/off cycles (1 sec to 99 hr, 59 min, 59 sec per cycle)
  • Antidrip function ensures dispense accuracy
  • Reversible motor—purge tubing before or after pumping; pump fluid in either direction
  • Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio
  • Powerful motors let you stack pump heads for increased flow rates and for multichannel applications
  • Remote control capabilities
  • – Speed control input scalable 0 to 20 mA, 4 to 20 mA, or 0 to 10 V
  • – Pumping direction requires open collector or contact closure
  • – Start/stop/purge requires open collector or contact closure
  • – Tachometer output scalable 0 to 20 mA, 4 to 20 mA, 0 to 10 V, open collector
  • Stackable, splash-resistant ABS plastic controller housing is IP33 rated; drive housing is epoxy finished steel, IP33 rated
  • 6-ft (1.8-m) cable connects drive and controller
  • Remote control capabilities via a DB25 female connector on back of controller

These precision drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing by time or by volume. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size. Program the drive via the simple membrane keypad; keypad lock/unlock feature protects settings.

Whats Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

Control type Digital Variable Speed
Digital dispensing Yes
Housing Material ABS Plastic and Aluminum Controller; Painted Steel Drive
Motor hp 1/10
Open-Head Sensor No
Power (Hz) 50/60
Remote I/O 0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
Reversible motor Yes
Speed Variable
Speed Control ±0.1% (0.1 rpm at 600 rpm)
Type of Pump heads accepted Standard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm
Description L/S Digital Modular Drive w/ Remote I/O; 600 rpm
Controller Height (InchShort) 5.5
Controller Width (InchShort) 8.3281
Controller Width (mm) 211
Drive Height (InchShort)
Min RPM (rpm) 0.1
Motor IP rating IP 33
Motor Length (InchShort) 8.75
No. of Pump heads accepted 2
Power (Amps) 2.2
Power (VAC) 90 to 260
Controller Height (mm) 140
Controller Length (InchShort) 10.3437
Controller Length (mm) 263
Drive Height (mm)
Drive Length (mm)
Drive Width (InchShort)
Max Flow Rate (mLmin) 3400
Motor Length (mm) 222
Motor Width (InchShort) 3.7968
Controller IP rating IP 33
Max RPM (rpm) 600
Motor Height (mm) 120
Pump Series L/S
Drive Length (InchShort)
Drive Width (mm)
Min Flow Rate (mLmin) 0.006
Motor Height (InchShort) 4.75
Motor (watts) 75
Motor Width (mm) 97
Since we have got around 12-15 units of model 77301-20. Does the new model 77301-40 is compatible ie drive and controller are interchangeable with the earlier model 77301-20.
Answer
The older controllers and motors from the are not compatible with the new model controllers and motors. You would not be able to mix and match the components of the different generations of drives.Answered on 4/10/2013 by Mike S from Technical Support
Related Products
JMG Part No. 1015192
JMG Part No. 1252849

Masterflex L/S Digital Modular Drive with Remote I/O; 600 rpm

OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Masterflex
JMG No: 1109566
Part No: 77301-40
UNSPSC: 41105102
Type: Instrument
Availability: Call For ETA
  • Precision digital drives offer three dispensing modes and precision low-maintenance motors— modular format lets you place motor and controller where convenient
  • Flow rate 0.0012 to 3400 mL/min with L/S tubing. Flow rate depends on drive rpm and tubing size.
  • Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually.
  • Menu-driven interface lets you select one of seven languages for programming and operation
  • Dispense by Volume in mL (0.001 to 99999 mL), L, or gal; Copy—1 to 9,999 dispense cycles; or Time—time interval of on/off cycles (1 sec to 99 hr, 59 min, 59 sec per cycle)
  • Antidrip function ensures dispense accuracy
  • Reversible motor—purge tubing before or after pumping; pump fluid in either direction
  • Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio
  • Powerful motors let you stack pump heads for increased flow rates and for multichannel applications
  • Remote control capabilities
  • – Speed control input scalable 0 to 20 mA, 4 to 20 mA, or 0 to 10 V
  • – Pumping direction requires open collector or contact closure
  • – Start/stop/purge requires open collector or contact closure
  • – Tachometer output scalable 0 to 20 mA, 4 to 20 mA, 0 to 10 V, open collector
  • Stackable, splash-resistant ABS plastic controller housing is IP33 rated; drive housing is epoxy finished steel, IP33 rated
  • 6-ft (1.8-m) cable connects drive and controller
  • Remote control capabilities via a DB25 female connector on back of controller

These precision drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing by time or by volume. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size. Program the drive via the simple membrane keypad; keypad lock/unlock feature protects settings.

Whats Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

Control type Digital Variable Speed
Digital dispensing Yes
Housing Material ABS Plastic and Aluminum Controller; Painted Steel Drive
Motor hp 1/10
Open-Head Sensor No
Power (Hz) 50/60
Remote I/O 0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
Reversible motor Yes
Speed Variable
Speed Control ±0.1% (0.1 rpm at 600 rpm)
Type of Pump heads accepted Standard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm
Description L/S Digital Modular Drive w/ Remote I/O; 600 rpm
Controller Height (InchShort) 5.5
Controller Width (InchShort) 8.3281
Controller Width (mm) 211
Drive Height (InchShort)
Min RPM (rpm) 0.1
Motor IP rating IP 33
Motor Length (InchShort) 8.75
No. of Pump heads accepted 2
Power (Amps) 2.2
Power (VAC) 90 to 260
Controller Height (mm) 140
Controller Length (InchShort) 10.3437
Controller Length (mm) 263
Drive Height (mm)
Drive Length (mm)
Drive Width (InchShort)
Max Flow Rate (mLmin) 3400
Motor Length (mm) 222
Motor Width (InchShort) 3.7968
Controller IP rating IP 33
Max RPM (rpm) 600
Motor Height (mm) 120
Pump Series L/S
Drive Length (InchShort)
Drive Width (mm)
Min Flow Rate (mLmin) 0.006
Motor Height (InchShort) 4.75
Motor (watts) 75
Motor Width (mm) 97
Since we have got around 12-15 units of model 77301-20. Does the new model 77301-40 is compatible ie drive and controller are interchangeable with the earlier model 77301-20.
Answer
The older controllers and motors from the are not compatible with the new model controllers and motors. You would not be able to mix and match the components of the different generations of drives.Answered on 4/10/2013 by Mike S from Technical Support
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Masterflex
JMG No: 1109566
Part No: 77301-40
UNSPSC: 41105102
Type: Instrument
Availability: Call For ETA
  • Precision digital drives offer three dispensing modes and precision low-maintenance motors— modular format lets you place motor and controller where convenient
  • Flow rate 0.0012 to 3400 mL/min with L/S tubing. Flow rate depends on drive rpm and tubing size.
  • Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually.
  • Menu-driven interface lets you select one of seven languages for programming and operation
  • Dispense by Volume in mL (0.001 to 99999 mL), L, or gal; Copy—1 to 9,999 dispense cycles; or Time—time interval of on/off cycles (1 sec to 99 hr, 59 min, 59 sec per cycle)
  • Antidrip function ensures dispense accuracy
  • Reversible motor—purge tubing before or after pumping; pump fluid in either direction
  • Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio
  • Powerful motors let you stack pump heads for increased flow rates and for multichannel applications
  • Remote control capabilities
  • – Speed control input scalable 0 to 20 mA, 4 to 20 mA, or 0 to 10 V
  • – Pumping direction requires open collector or contact closure
  • – Start/stop/purge requires open collector or contact closure
  • – Tachometer output scalable 0 to 20 mA, 4 to 20 mA, 0 to 10 V, open collector
  • Stackable, splash-resistant ABS plastic controller housing is IP33 rated; drive housing is epoxy finished steel, IP33 rated
  • 6-ft (1.8-m) cable connects drive and controller
  • Remote control capabilities via a DB25 female connector on back of controller

These precision drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing by time or by volume. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size. Program the drive via the simple membrane keypad; keypad lock/unlock feature protects settings.

Whats Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

Control type Digital Variable Speed
Digital dispensing Yes
Housing Material ABS Plastic and Aluminum Controller; Painted Steel Drive
Motor hp 1/10
Open-Head Sensor No
Power (Hz) 50/60
Remote I/O 0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
Reversible motor Yes
Speed Variable
Speed Control ±0.1% (0.1 rpm at 600 rpm)
Type of Pump heads accepted Standard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm
Description L/S Digital Modular Drive w/ Remote I/O; 600 rpm
Controller Height (InchShort) 5.5
Controller Width (InchShort) 8.3281
Controller Width (mm) 211
Drive Height (InchShort)
Min RPM (rpm) 0.1
Motor IP rating IP 33
Motor Length (InchShort) 8.75
No. of Pump heads accepted 2
Power (Amps) 2.2
Power (VAC) 90 to 260
Controller Height (mm) 140
Controller Length (InchShort) 10.3437
Controller Length (mm) 263
Drive Height (mm)
Drive Length (mm)
Drive Width (InchShort)
Max Flow Rate (mLmin) 3400
Motor Length (mm) 222
Motor Width (InchShort) 3.7968
Controller IP rating IP 33
Max RPM (rpm) 600
Motor Height (mm) 120
Pump Series L/S
Drive Length (InchShort)
Drive Width (mm)
Min Flow Rate (mLmin) 0.006
Motor Height (InchShort) 4.75
Motor (watts) 75
Motor Width (mm) 97
Since we have got around 12-15 units of model 77301-20. Does the new model 77301-40 is compatible ie drive and controller are interchangeable with the earlier model 77301-20.
Answer
The older controllers and motors from the are not compatible with the new model controllers and motors. You would not be able to mix and match the components of the different generations of drives.Answered on 4/10/2013 by Mike S from Technical Support
Enquiry sent successfully
Product Enquiry
Related Products
JMG Part No. 1015192
JMG Part No. 1252849