$442 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
OVERVIEW
JMG No: 1181876
Part No: M601A01
Type: Instrument
Availability: Within 22 days

Platinum Stock Products; Low-noise, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.27 to 10k Hz, top exit, 2-pin connector, single point ISO 17025 accredited calibration

 

Product Specifications
  ENGLISH SI  
Performance
    Sensitivity (±20 %) 100 mV/g 10.2 mV/(m/s²) [1] 
    Measurement Range ±50 g ±490 m/s²  
    Frequency Range (±3 dB) 16 to 600000 cpm 0.27 to 10000 Hz [4] 
    Resonant Frequency 960 kcpm 16 kHz [2] 
    Broadband Resolution (1) 50 µg 491 µm/sec2 [2] 
    Non-Linearity ±1 % ±1 % [3] 
    Transverse Sensitivity ≤7 % ≤7 %  
Environmental
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
    Temperature Range -65 to +250 °F -54 to +121 °C  
    Enclosure Rating IP68 IP68  
Electrical
    Settling Time (within 1% of bias) ≤4.0 sec ≤4.0 sec  
    Discharge Time Constant ≥0.6 sec ≥0.6 sec  
    Excitation Voltage 18 to 28 VDC 18 to 28 VDC  
    Constant Current Excitation 2 to 20 mA 2 to 20 mA  
    Output Impedance <150> <150>  
    Output Bias Voltage 8 to 12 VDC 8 to 12 VDC  
    Spectral Noise (10 Hz) 3.2 µg/√Hz 31.0 (µm/sec2)/√Hz [2] 
    Spectral Noise (100 Hz) 1.0 µg/√Hz 9.81 (µm/sec2)/√Hz [2] 
    Spectral Noise (1 kHz) 0.7 µg/√Hz 6.94 (µm/sec2)/√Hz [2] 
    Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
Physical
    Size - Hex 7/8 in 22 mm  
    Size - Height 1.94 in 49.3 mm  
    Weight 2.8 oz 80 gm  
    Mounting Thread 1/4-28 Female Not Applicable [5] 
    Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm  
    Sensing Element Ceramic Ceramic  
    Sensing Geometry Shear Shear  
    Housing Material Stainless Steel Stainless Steel  
    Sealing Welded Hermetic Welded Hermetic  
    Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015  
    Electrical Connection Position Top Top  
 
All specifications are at room temperature unless otherwise specified.
 
CE
Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] The high frequency tolerance is accurate within ±10% of the specified frequency.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 for details.
Accessories:
Supplied
081A40 Mounting Stud (1)
Optional Versions:
(M) Metric Mount
  ENGLISH SI
 
Accessories:
     M081A61 Mounting Stud (1)
(TO) Temperature Output
  ENGLISH SI
    Temperature Output Range +36 to +250 +2 to +121
    Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
    Electrical Connector 3-Pin 3-Pin
    Electrical Connections (Pin A) Acceleration Output Acceleration Output
    Electrical Connections (Pin B) Ground Ground
    Electrical Connections (Pin C) Temperature Output Temperature Output
    OVERVIEW
    JMG No: 1181876
    Part No: M601A01
    Type: Instrument
    Availability: Within 22 days

    Platinum Stock Products; Low-noise, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.27 to 10k Hz, top exit, 2-pin connector, single point ISO 17025 accredited calibration

     

    Product Specifications
      ENGLISH SI  
    Performance
        Sensitivity (±20 %) 100 mV/g 10.2 mV/(m/s²) [1] 
        Measurement Range ±50 g ±490 m/s²  
        Frequency Range (±3 dB) 16 to 600000 cpm 0.27 to 10000 Hz [4] 
        Resonant Frequency 960 kcpm 16 kHz [2] 
        Broadband Resolution (1) 50 µg 491 µm/sec2 [2] 
        Non-Linearity ±1 % ±1 % [3] 
        Transverse Sensitivity ≤7 % ≤7 %  
    Environmental
        Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
        Temperature Range -65 to +250 °F -54 to +121 °C  
        Enclosure Rating IP68 IP68  
    Electrical
        Settling Time (within 1% of bias) ≤4.0 sec ≤4.0 sec  
        Discharge Time Constant ≥0.6 sec ≥0.6 sec  
        Excitation Voltage 18 to 28 VDC 18 to 28 VDC  
        Constant Current Excitation 2 to 20 mA 2 to 20 mA  
        Output Impedance <150> <150>  
        Output Bias Voltage 8 to 12 VDC 8 to 12 VDC  
        Spectral Noise (10 Hz) 3.2 µg/√Hz 31.0 (µm/sec2)/√Hz [2] 
        Spectral Noise (100 Hz) 1.0 µg/√Hz 9.81 (µm/sec2)/√Hz [2] 
        Spectral Noise (1 kHz) 0.7 µg/√Hz 6.94 (µm/sec2)/√Hz [2] 
        Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
    Physical
        Size - Hex 7/8 in 22 mm  
        Size - Height 1.94 in 49.3 mm  
        Weight 2.8 oz 80 gm  
        Mounting Thread 1/4-28 Female Not Applicable [5] 
        Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm  
        Sensing Element Ceramic Ceramic  
        Sensing Geometry Shear Shear  
        Housing Material Stainless Steel Stainless Steel  
        Sealing Welded Hermetic Welded Hermetic  
        Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015  
        Electrical Connection Position Top Top  
     
    All specifications are at room temperature unless otherwise specified.
     
    CE
    Product Notes
    [1] Conversion Factor 1g = 9.81 m/s².
    [2] Typical.
    [3] Zero-based, least-squares, straight line method.
    [4] The high frequency tolerance is accurate within ±10% of the specified frequency.
    [5] 1/4-28 has no equivalent in S.I. units.
    [6] See PCB Declaration of Conformance PS023 for details.
    Accessories:
    Supplied
    081A40 Mounting Stud (1)
    Optional Versions:
    (M) Metric Mount
      ENGLISH SI
     
    Accessories:
         M081A61 Mounting Stud (1)
    (TO) Temperature Output
      ENGLISH SI
        Temperature Output Range +36 to +250 +2 to +121
        Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
        Electrical Connector 3-Pin 3-Pin
        Electrical Connections (Pin A) Acceleration Output Acceleration Output
        Electrical Connections (Pin B) Ground Ground
        Electrical Connections (Pin C) Temperature Output Temperature Output
      Customers Also Bought
      JMG Part No. 1016726
      JMG Part No. 1008275
      $106 (Ex. GST)
      JMG Part No. 1008274

      Platinum Stock Products; Low-noise, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.27 to 10k Hz, top exit, 2-pin connector, single point ISO 17025 accredited calibration

      OVERVIEW
      JMG No: 1181876
      Part No: M601A01
      Type: Instrument
      Availability: Within 22 days

      Platinum Stock Products; Low-noise, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.27 to 10k Hz, top exit, 2-pin connector, single point ISO 17025 accredited calibration

       

      Product Specifications
        ENGLISH SI  
      Performance
          Sensitivity (±20 %) 100 mV/g 10.2 mV/(m/s²) [1] 
          Measurement Range ±50 g ±490 m/s²  
          Frequency Range (±3 dB) 16 to 600000 cpm 0.27 to 10000 Hz [4] 
          Resonant Frequency 960 kcpm 16 kHz [2] 
          Broadband Resolution (1) 50 µg 491 µm/sec2 [2] 
          Non-Linearity ±1 % ±1 % [3] 
          Transverse Sensitivity ≤7 % ≤7 %  
      Environmental
          Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
          Temperature Range -65 to +250 °F -54 to +121 °C  
          Enclosure Rating IP68 IP68  
      Electrical
          Settling Time (within 1% of bias) ≤4.0 sec ≤4.0 sec  
          Discharge Time Constant ≥0.6 sec ≥0.6 sec  
          Excitation Voltage 18 to 28 VDC 18 to 28 VDC  
          Constant Current Excitation 2 to 20 mA 2 to 20 mA  
          Output Impedance <150> <150>  
          Output Bias Voltage 8 to 12 VDC 8 to 12 VDC  
          Spectral Noise (10 Hz) 3.2 µg/√Hz 31.0 (µm/sec2)/√Hz [2] 
          Spectral Noise (100 Hz) 1.0 µg/√Hz 9.81 (µm/sec2)/√Hz [2] 
          Spectral Noise (1 kHz) 0.7 µg/√Hz 6.94 (µm/sec2)/√Hz [2] 
          Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
      Physical
          Size - Hex 7/8 in 22 mm  
          Size - Height 1.94 in 49.3 mm  
          Weight 2.8 oz 80 gm  
          Mounting Thread 1/4-28 Female Not Applicable [5] 
          Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm  
          Sensing Element Ceramic Ceramic  
          Sensing Geometry Shear Shear  
          Housing Material Stainless Steel Stainless Steel  
          Sealing Welded Hermetic Welded Hermetic  
          Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015  
          Electrical Connection Position Top Top  
       
      All specifications are at room temperature unless otherwise specified.
       
      CE
      Product Notes
      [1] Conversion Factor 1g = 9.81 m/s².
      [2] Typical.
      [3] Zero-based, least-squares, straight line method.
      [4] The high frequency tolerance is accurate within ±10% of the specified frequency.
      [5] 1/4-28 has no equivalent in S.I. units.
      [6] See PCB Declaration of Conformance PS023 for details.
      Accessories:
      Supplied
      081A40 Mounting Stud (1)
      Optional Versions:
      (M) Metric Mount
        ENGLISH SI
       
      Accessories:
           M081A61 Mounting Stud (1)
      (TO) Temperature Output
        ENGLISH SI
          Temperature Output Range +36 to +250 +2 to +121
          Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
          Electrical Connector 3-Pin 3-Pin
          Electrical Connections (Pin A) Acceleration Output Acceleration Output
          Electrical Connections (Pin B) Ground Ground
          Electrical Connections (Pin C) Temperature Output Temperature Output
        OVERVIEW
        JMG No: 1181876
        Part No: M601A01
        Type: Instrument
        Availability: Within 22 days

        Platinum Stock Products; Low-noise, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.27 to 10k Hz, top exit, 2-pin connector, single point ISO 17025 accredited calibration

         

        Product Specifications
          ENGLISH SI  
        Performance
            Sensitivity (±20 %) 100 mV/g 10.2 mV/(m/s²) [1] 
            Measurement Range ±50 g ±490 m/s²  
            Frequency Range (±3 dB) 16 to 600000 cpm 0.27 to 10000 Hz [4] 
            Resonant Frequency 960 kcpm 16 kHz [2] 
            Broadband Resolution (1) 50 µg 491 µm/sec2 [2] 
            Non-Linearity ±1 % ±1 % [3] 
            Transverse Sensitivity ≤7 % ≤7 %  
        Environmental
            Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
            Temperature Range -65 to +250 °F -54 to +121 °C  
            Enclosure Rating IP68 IP68  
        Electrical
            Settling Time (within 1% of bias) ≤4.0 sec ≤4.0 sec  
            Discharge Time Constant ≥0.6 sec ≥0.6 sec  
            Excitation Voltage 18 to 28 VDC 18 to 28 VDC  
            Constant Current Excitation 2 to 20 mA 2 to 20 mA  
            Output Impedance <150> <150>  
            Output Bias Voltage 8 to 12 VDC 8 to 12 VDC  
            Spectral Noise (10 Hz) 3.2 µg/√Hz 31.0 (µm/sec2)/√Hz [2] 
            Spectral Noise (100 Hz) 1.0 µg/√Hz 9.81 (µm/sec2)/√Hz [2] 
            Spectral Noise (1 kHz) 0.7 µg/√Hz 6.94 (µm/sec2)/√Hz [2] 
            Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
        Physical
            Size - Hex 7/8 in 22 mm  
            Size - Height 1.94 in 49.3 mm  
            Weight 2.8 oz 80 gm  
            Mounting Thread 1/4-28 Female Not Applicable [5] 
            Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm  
            Sensing Element Ceramic Ceramic  
            Sensing Geometry Shear Shear  
            Housing Material Stainless Steel Stainless Steel  
            Sealing Welded Hermetic Welded Hermetic  
            Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015  
            Electrical Connection Position Top Top  
         
        All specifications are at room temperature unless otherwise specified.
         
        CE
        Product Notes
        [1] Conversion Factor 1g = 9.81 m/s².
        [2] Typical.
        [3] Zero-based, least-squares, straight line method.
        [4] The high frequency tolerance is accurate within ±10% of the specified frequency.
        [5] 1/4-28 has no equivalent in S.I. units.
        [6] See PCB Declaration of Conformance PS023 for details.
        Accessories:
        Supplied
        081A40 Mounting Stud (1)
        Optional Versions:
        (M) Metric Mount
          ENGLISH SI
         
        Accessories:
             M081A61 Mounting Stud (1)
        (TO) Temperature Output
          ENGLISH SI
            Temperature Output Range +36 to +250 +2 to +121
            Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
            Electrical Connector 3-Pin 3-Pin
            Electrical Connections (Pin A) Acceleration Output Acceleration Output
            Electrical Connections (Pin B) Ground Ground
            Electrical Connections (Pin C) Temperature Output Temperature Output
          $442 AUD (Ex. GST)
          Qty:
          Enquiry sent successfully
          Product Enquiry
          Customers Also Bought
          JMG Part No. 1016726
          JMG Part No. 1008275
          $106 (Ex. GST)
          JMG Part No. 1008274