$367 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
OVERVIEW
SPECIFICATIONS
DOWNLOADS
JMG No: 1091450
Part No: 608A11
Type: Instrument
Availability: Within 14 days

Platinum Low-cost Industrial ICP® Accelerometer
Platinum Stock Products; Low-cost, general purpose, industrial ceramic shear ICP® accelerometer, 100 mV/g, 0.5 to 10k Hz, top exit, 10-ft integral cable, single point ISO 17025 accredited calibration
IMI guarantees this item can ship immediately else shipping is free. Low-cost industrial accelerometer with integral 10 ft. cable to blunt termination, 100 mV/g, general purpose, submersible, ceramic shear ICP®, 0.5 to 10k Hz, top exit
Product Data Sheet
 

Product Specifications
  ENGLISH SI  
Performance
    Sensitivity (±15 %) 100 mV/g 10.2 mV/(m/s²) [1] 
    Measurement Range ±50 g ±490 m/s²  
    Frequency Range (±3 dB) 30 to 600000 cpm 0.5 to 10000 Hz  
    Resonant Frequency 1320 kcpm 22 kHz [2] 
    Broadband Resolution (1) 350 µg 3434 µm/sec2 [2] 
    Non-Linearity ±1 % ±1 % [3] 
    Transverse Sensitivity ≤7 % ≤7 %  
Environmental
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
    Temperature Range -65 to +250 °F -54 to +121 °C  
    Enclosure Rating IP68 IP68  
Electrical
    Settling Time (within 1% of bias) ≤2.0 sec ≤2.0 sec  
    Discharge Time Constant ≥0.3 sec ≥0.3 sec  
    Excitation Voltage 18 to 28 VDC 18 to 28 VDC  
    Constant Current Excitation 2 to 20 mA 2 to 20 mA  
    Output Impedance <150> <150>  
    Output Bias Voltage 8 to 12 VDC 8 to 12 VDC  
    Spectral Noise (10 Hz) 8 µg/√Hz 78.5 (µm/sec2)/√Hz [2] 
    Spectral Noise (100 Hz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [2] 
    Spectral Noise (1 kHz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [2] 
    Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
Physical
    Size - Hex 9/16 in 14 mm  
    Size - Height 2.5 in 64 mm  
    Weight (with cable) 3.5 oz 99.3 gm  
    Mounting Stud Stud  
    Mounting Thread 1/4-28 Female 1/4-28 Female [4] 
    Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm  
    Sensing Element Ceramic Ceramic  
    Sensing Geometry Shear Shear  
    Housing Material Stainless Steel Stainless Steel  
    Sealing Molded Molded  
    Electrical Connector Molded Integral Cable Molded Integral Cable  
    Electrical Connection Position Top Top  
    Cable Length 10 ft 3 m  
    Cable Type Polyurethane Polyurethane [5] 
 
All specifications are at room temperature unless otherwise specified.
 
CEceneleccsa_us
Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] 1/4-28 has no equivalent in S.I. units.
[5] Twisted shielded pair.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.
Accessories:
Supplied
081A40 Mounting Stud (1)
ICS-2 NIST-traceable single-axis single-point amplitude response calibration at 6000 cpm (100 Hz) (1)
Optional Versions:
(EX) Hazardous Area Approval- contact factory for specific approvals
  ENGLISH SI
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4 Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
    Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 3=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 3="">
    Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 1=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 1="">
    Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4 Ex ia IIC T4, AExia IIC, T4
(LB) Low Bias Voltage
  ENGLISH SI
    Output Bias Voltage 4.8 to 6.5 4.8 to 6.5
    Excitation Voltage 12 to 28 12 to 28
    Measurement Range ±10 ±98
(M) Metric Mount
  ENGLISH SI
 
Accessories:
     M081A61 Mounting Stud (1)
(TO) Temperature Output
  ENGLISH SI
    Temperature Output Range +36 to +250 °F +2 to +121 °C
    Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
    Electrical Connector Molded Integral Cable Molded Integral Cable
    Electrical Connections (Red) Acceleration Output Acceleration Output
    Electrical Connections (Black) Ground Ground
    Electrical Connections (White) Temperature Output Temperature Output
Weight (with cable) (English) 3.5 oz
Spectral Noise (100 Hz) (SI) 49.1 (µm/sec2)/√Hz
Temperature Range (English) -65 to +250 °F
Sensitivity (±15 %) (SI) 10.2 mV/(m/s²)
Weight (with cable) (SI) 99.3 gm
Size - Hex (English) 9/16 in
Spectral Noise (10 Hz) (SI) 78.5 (µm/sec2)/√Hz
Resonant Frequency (English) 1320 kcpm
Housing Material Stainless Steel
Mounting Torque (SI) 2.7 to 6.8 Nm
Resonant Frequency (SI) 22 kHz
Size - Height (English) 2.5 in
Cable Length (English) 10 ft
Spectral Noise (1 kHz) (English) 4 µg/√Hz
Constant Current Excitation 2 to 20 mA
Size - Height (SI) 64 mm
Electrical Connection Position Top
Overload Limit (Shock) (English) 5000 g pk
Frequency Range (±3 dB) (SI) 0.5 to 10000 Hz
Broadband Resolution (1) (SI) 3434 µm/sec2
Output Bias Voltage 8 to 12 VDC
Size - Hex (SI) 14 mm
Measurement Range (English) ±50 g
Enclosure Rating IP68
Overload Limit (Shock) (SI) 49050 m/s² pk
Sealing Molded
Electrical Isolation (Case) >100000000 Ohm
Output Impedance <150 Ohm
Frequency Range (±3 dB) (English) 30 to 600000 cpm
Sensing Element Ceramic
Temperature Range (SI) -54 to +121 °C
Cable Length (SI) 3 m
Non-Linearity ±1 %
Excitation Voltage 18 to 28 VDC
Sensing Geometry Shear
Cable Type Polyurethane
Sensitivity (±15 %) (English) 100 mV/g
Mounting Thread 1/4-28 Female
Settling Time (within 1% of bias) ≤2.0 sec
Transverse Sensitivity ≤7 %
Spectral Noise (100 Hz) (English) 5 µg/√Hz
Measurement Range (SI) ±490 m/s²
Mounting Torque (English) 2 to 5 ft-lb
Broadband Resolution (1) (English) 350 µg
Spectral Noise (1 kHz) (SI) 39.2 (µm/sec2)/√Hz
Mounting Stud
Discharge Time Constant ≥0.3 sec
Spectral Noise (10 Hz) (English) 8 µg/√Hz
Electrical Connector Molded Integral Cable
OVERVIEW
SPECIFICATIONS
DOWNLOADS
JMG No: 1091450
Part No: 608A11
Type: Instrument
Availability: Within 14 days

Platinum Low-cost Industrial ICP® Accelerometer
Platinum Stock Products; Low-cost, general purpose, industrial ceramic shear ICP® accelerometer, 100 mV/g, 0.5 to 10k Hz, top exit, 10-ft integral cable, single point ISO 17025 accredited calibration
IMI guarantees this item can ship immediately else shipping is free. Low-cost industrial accelerometer with integral 10 ft. cable to blunt termination, 100 mV/g, general purpose, submersible, ceramic shear ICP®, 0.5 to 10k Hz, top exit
Product Data Sheet
 

Product Specifications
  ENGLISH SI  
Performance
    Sensitivity (±15 %) 100 mV/g 10.2 mV/(m/s²) [1] 
    Measurement Range ±50 g ±490 m/s²  
    Frequency Range (±3 dB) 30 to 600000 cpm 0.5 to 10000 Hz  
    Resonant Frequency 1320 kcpm 22 kHz [2] 
    Broadband Resolution (1) 350 µg 3434 µm/sec2 [2] 
    Non-Linearity ±1 % ±1 % [3] 
    Transverse Sensitivity ≤7 % ≤7 %  
Environmental
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
    Temperature Range -65 to +250 °F -54 to +121 °C  
    Enclosure Rating IP68 IP68  
Electrical
    Settling Time (within 1% of bias) ≤2.0 sec ≤2.0 sec  
    Discharge Time Constant ≥0.3 sec ≥0.3 sec  
    Excitation Voltage 18 to 28 VDC 18 to 28 VDC  
    Constant Current Excitation 2 to 20 mA 2 to 20 mA  
    Output Impedance <150> <150>  
    Output Bias Voltage 8 to 12 VDC 8 to 12 VDC  
    Spectral Noise (10 Hz) 8 µg/√Hz 78.5 (µm/sec2)/√Hz [2] 
    Spectral Noise (100 Hz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [2] 
    Spectral Noise (1 kHz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [2] 
    Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
Physical
    Size - Hex 9/16 in 14 mm  
    Size - Height 2.5 in 64 mm  
    Weight (with cable) 3.5 oz 99.3 gm  
    Mounting Stud Stud  
    Mounting Thread 1/4-28 Female 1/4-28 Female [4] 
    Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm  
    Sensing Element Ceramic Ceramic  
    Sensing Geometry Shear Shear  
    Housing Material Stainless Steel Stainless Steel  
    Sealing Molded Molded  
    Electrical Connector Molded Integral Cable Molded Integral Cable  
    Electrical Connection Position Top Top  
    Cable Length 10 ft 3 m  
    Cable Type Polyurethane Polyurethane [5] 
 
All specifications are at room temperature unless otherwise specified.
 
CEceneleccsa_us
Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] 1/4-28 has no equivalent in S.I. units.
[5] Twisted shielded pair.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.
Accessories:
Supplied
081A40 Mounting Stud (1)
ICS-2 NIST-traceable single-axis single-point amplitude response calibration at 6000 cpm (100 Hz) (1)
Optional Versions:
(EX) Hazardous Area Approval- contact factory for specific approvals
  ENGLISH SI
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4 Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
    Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 3=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 3="">
    Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 1=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 1="">
    Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4 Ex ia IIC T4, AExia IIC, T4
(LB) Low Bias Voltage
  ENGLISH SI
    Output Bias Voltage 4.8 to 6.5 4.8 to 6.5
    Excitation Voltage 12 to 28 12 to 28
    Measurement Range ±10 ±98
(M) Metric Mount
  ENGLISH SI
 
Accessories:
     M081A61 Mounting Stud (1)
(TO) Temperature Output
  ENGLISH SI
    Temperature Output Range +36 to +250 °F +2 to +121 °C
    Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
    Electrical Connector Molded Integral Cable Molded Integral Cable
    Electrical Connections (Red) Acceleration Output Acceleration Output
    Electrical Connections (Black) Ground Ground
    Electrical Connections (White) Temperature Output Temperature Output
Weight (with cable) (English) 3.5 oz
Spectral Noise (100 Hz) (SI) 49.1 (µm/sec2)/√Hz
Temperature Range (English) -65 to +250 °F
Sensitivity (±15 %) (SI) 10.2 mV/(m/s²)
Weight (with cable) (SI) 99.3 gm
Size - Hex (English) 9/16 in
Spectral Noise (10 Hz) (SI) 78.5 (µm/sec2)/√Hz
Resonant Frequency (English) 1320 kcpm
Housing Material Stainless Steel
Mounting Torque (SI) 2.7 to 6.8 Nm
Resonant Frequency (SI) 22 kHz
Size - Height (English) 2.5 in
Cable Length (English) 10 ft
Spectral Noise (1 kHz) (English) 4 µg/√Hz
Constant Current Excitation 2 to 20 mA
Size - Height (SI) 64 mm
Electrical Connection Position Top
Overload Limit (Shock) (English) 5000 g pk
Frequency Range (±3 dB) (SI) 0.5 to 10000 Hz
Broadband Resolution (1) (SI) 3434 µm/sec2
Output Bias Voltage 8 to 12 VDC
Size - Hex (SI) 14 mm
Measurement Range (English) ±50 g
Enclosure Rating IP68
Overload Limit (Shock) (SI) 49050 m/s² pk
Sealing Molded
Electrical Isolation (Case) >100000000 Ohm
Output Impedance <150 Ohm
Frequency Range (±3 dB) (English) 30 to 600000 cpm
Sensing Element Ceramic
Temperature Range (SI) -54 to +121 °C
Cable Length (SI) 3 m
Non-Linearity ±1 %
Excitation Voltage 18 to 28 VDC
Sensing Geometry Shear
Cable Type Polyurethane
Sensitivity (±15 %) (English) 100 mV/g
Mounting Thread 1/4-28 Female
Settling Time (within 1% of bias) ≤2.0 sec
Transverse Sensitivity ≤7 %
Spectral Noise (100 Hz) (English) 5 µg/√Hz
Measurement Range (SI) ±490 m/s²
Mounting Torque (English) 2 to 5 ft-lb
Broadband Resolution (1) (English) 350 µg
Spectral Noise (1 kHz) (SI) 39.2 (µm/sec2)/√Hz
Mounting Stud
Discharge Time Constant ≥0.3 sec
Spectral Noise (10 Hz) (English) 8 µg/√Hz
Electrical Connector Molded Integral Cable

Platinum Stock Products; Low-cost, general purpose, industrial ceramic shear ICP® accelerometer, 100 mV/g, 0.5 to 10k Hz, top exit, 10-ft integral cable, single point ISO 17025 accredited calibration

OVERVIEW
SPECIFICATIONS
DOWNLOADS
JMG No: 1091450
Part No: 608A11
Type: Instrument
Availability: Within 14 days

Platinum Low-cost Industrial ICP® Accelerometer
Platinum Stock Products; Low-cost, general purpose, industrial ceramic shear ICP® accelerometer, 100 mV/g, 0.5 to 10k Hz, top exit, 10-ft integral cable, single point ISO 17025 accredited calibration
IMI guarantees this item can ship immediately else shipping is free. Low-cost industrial accelerometer with integral 10 ft. cable to blunt termination, 100 mV/g, general purpose, submersible, ceramic shear ICP®, 0.5 to 10k Hz, top exit
Product Data Sheet
 

Product Specifications
  ENGLISH SI  
Performance
    Sensitivity (±15 %) 100 mV/g 10.2 mV/(m/s²) [1] 
    Measurement Range ±50 g ±490 m/s²  
    Frequency Range (±3 dB) 30 to 600000 cpm 0.5 to 10000 Hz  
    Resonant Frequency 1320 kcpm 22 kHz [2] 
    Broadband Resolution (1) 350 µg 3434 µm/sec2 [2] 
    Non-Linearity ±1 % ±1 % [3] 
    Transverse Sensitivity ≤7 % ≤7 %  
Environmental
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
    Temperature Range -65 to +250 °F -54 to +121 °C  
    Enclosure Rating IP68 IP68  
Electrical
    Settling Time (within 1% of bias) ≤2.0 sec ≤2.0 sec  
    Discharge Time Constant ≥0.3 sec ≥0.3 sec  
    Excitation Voltage 18 to 28 VDC 18 to 28 VDC  
    Constant Current Excitation 2 to 20 mA 2 to 20 mA  
    Output Impedance <150> <150>  
    Output Bias Voltage 8 to 12 VDC 8 to 12 VDC  
    Spectral Noise (10 Hz) 8 µg/√Hz 78.5 (µm/sec2)/√Hz [2] 
    Spectral Noise (100 Hz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [2] 
    Spectral Noise (1 kHz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [2] 
    Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
Physical
    Size - Hex 9/16 in 14 mm  
    Size - Height 2.5 in 64 mm  
    Weight (with cable) 3.5 oz 99.3 gm  
    Mounting Stud Stud  
    Mounting Thread 1/4-28 Female 1/4-28 Female [4] 
    Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm  
    Sensing Element Ceramic Ceramic  
    Sensing Geometry Shear Shear  
    Housing Material Stainless Steel Stainless Steel  
    Sealing Molded Molded  
    Electrical Connector Molded Integral Cable Molded Integral Cable  
    Electrical Connection Position Top Top  
    Cable Length 10 ft 3 m  
    Cable Type Polyurethane Polyurethane [5] 
 
All specifications are at room temperature unless otherwise specified.
 
CEceneleccsa_us
Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] 1/4-28 has no equivalent in S.I. units.
[5] Twisted shielded pair.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.
Accessories:
Supplied
081A40 Mounting Stud (1)
ICS-2 NIST-traceable single-axis single-point amplitude response calibration at 6000 cpm (100 Hz) (1)
Optional Versions:
(EX) Hazardous Area Approval- contact factory for specific approvals
  ENGLISH SI
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4 Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
    Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 3=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 3="">
    Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 1=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 1="">
    Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4 Ex ia IIC T4, AExia IIC, T4
(LB) Low Bias Voltage
  ENGLISH SI
    Output Bias Voltage 4.8 to 6.5 4.8 to 6.5
    Excitation Voltage 12 to 28 12 to 28
    Measurement Range ±10 ±98
(M) Metric Mount
  ENGLISH SI
 
Accessories:
     M081A61 Mounting Stud (1)
(TO) Temperature Output
  ENGLISH SI
    Temperature Output Range +36 to +250 °F +2 to +121 °C
    Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
    Electrical Connector Molded Integral Cable Molded Integral Cable
    Electrical Connections (Red) Acceleration Output Acceleration Output
    Electrical Connections (Black) Ground Ground
    Electrical Connections (White) Temperature Output Temperature Output
Weight (with cable) (English) 3.5 oz
Spectral Noise (100 Hz) (SI) 49.1 (µm/sec2)/√Hz
Temperature Range (English) -65 to +250 °F
Sensitivity (±15 %) (SI) 10.2 mV/(m/s²)
Weight (with cable) (SI) 99.3 gm
Size - Hex (English) 9/16 in
Spectral Noise (10 Hz) (SI) 78.5 (µm/sec2)/√Hz
Resonant Frequency (English) 1320 kcpm
Housing Material Stainless Steel
Mounting Torque (SI) 2.7 to 6.8 Nm
Resonant Frequency (SI) 22 kHz
Size - Height (English) 2.5 in
Cable Length (English) 10 ft
Spectral Noise (1 kHz) (English) 4 µg/√Hz
Constant Current Excitation 2 to 20 mA
Size - Height (SI) 64 mm
Electrical Connection Position Top
Overload Limit (Shock) (English) 5000 g pk
Frequency Range (±3 dB) (SI) 0.5 to 10000 Hz
Broadband Resolution (1) (SI) 3434 µm/sec2
Output Bias Voltage 8 to 12 VDC
Size - Hex (SI) 14 mm
Measurement Range (English) ±50 g
Enclosure Rating IP68
Overload Limit (Shock) (SI) 49050 m/s² pk
Sealing Molded
Electrical Isolation (Case) >100000000 Ohm
Output Impedance <150 Ohm
Frequency Range (±3 dB) (English) 30 to 600000 cpm
Sensing Element Ceramic
Temperature Range (SI) -54 to +121 °C
Cable Length (SI) 3 m
Non-Linearity ±1 %
Excitation Voltage 18 to 28 VDC
Sensing Geometry Shear
Cable Type Polyurethane
Sensitivity (±15 %) (English) 100 mV/g
Mounting Thread 1/4-28 Female
Settling Time (within 1% of bias) ≤2.0 sec
Transverse Sensitivity ≤7 %
Spectral Noise (100 Hz) (English) 5 µg/√Hz
Measurement Range (SI) ±490 m/s²
Mounting Torque (English) 2 to 5 ft-lb
Broadband Resolution (1) (English) 350 µg
Spectral Noise (1 kHz) (SI) 39.2 (µm/sec2)/√Hz
Mounting Stud
Discharge Time Constant ≥0.3 sec
Spectral Noise (10 Hz) (English) 8 µg/√Hz
Electrical Connector Molded Integral Cable
OVERVIEW
SPECIFICATIONS
DOWNLOADS
JMG No: 1091450
Part No: 608A11
Type: Instrument
Availability: Within 14 days

Platinum Low-cost Industrial ICP® Accelerometer
Platinum Stock Products; Low-cost, general purpose, industrial ceramic shear ICP® accelerometer, 100 mV/g, 0.5 to 10k Hz, top exit, 10-ft integral cable, single point ISO 17025 accredited calibration
IMI guarantees this item can ship immediately else shipping is free. Low-cost industrial accelerometer with integral 10 ft. cable to blunt termination, 100 mV/g, general purpose, submersible, ceramic shear ICP®, 0.5 to 10k Hz, top exit
Product Data Sheet
 

Product Specifications
  ENGLISH SI  
Performance
    Sensitivity (±15 %) 100 mV/g 10.2 mV/(m/s²) [1] 
    Measurement Range ±50 g ±490 m/s²  
    Frequency Range (±3 dB) 30 to 600000 cpm 0.5 to 10000 Hz  
    Resonant Frequency 1320 kcpm 22 kHz [2] 
    Broadband Resolution (1) 350 µg 3434 µm/sec2 [2] 
    Non-Linearity ±1 % ±1 % [3] 
    Transverse Sensitivity ≤7 % ≤7 %  
Environmental
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
    Temperature Range -65 to +250 °F -54 to +121 °C  
    Enclosure Rating IP68 IP68  
Electrical
    Settling Time (within 1% of bias) ≤2.0 sec ≤2.0 sec  
    Discharge Time Constant ≥0.3 sec ≥0.3 sec  
    Excitation Voltage 18 to 28 VDC 18 to 28 VDC  
    Constant Current Excitation 2 to 20 mA 2 to 20 mA  
    Output Impedance <150> <150>  
    Output Bias Voltage 8 to 12 VDC 8 to 12 VDC  
    Spectral Noise (10 Hz) 8 µg/√Hz 78.5 (µm/sec2)/√Hz [2] 
    Spectral Noise (100 Hz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [2] 
    Spectral Noise (1 kHz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [2] 
    Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
Physical
    Size - Hex 9/16 in 14 mm  
    Size - Height 2.5 in 64 mm  
    Weight (with cable) 3.5 oz 99.3 gm  
    Mounting Stud Stud  
    Mounting Thread 1/4-28 Female 1/4-28 Female [4] 
    Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm  
    Sensing Element Ceramic Ceramic  
    Sensing Geometry Shear Shear  
    Housing Material Stainless Steel Stainless Steel  
    Sealing Molded Molded  
    Electrical Connector Molded Integral Cable Molded Integral Cable  
    Electrical Connection Position Top Top  
    Cable Length 10 ft 3 m  
    Cable Type Polyurethane Polyurethane [5] 
 
All specifications are at room temperature unless otherwise specified.
 
CEceneleccsa_us
Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] 1/4-28 has no equivalent in S.I. units.
[5] Twisted shielded pair.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.
Accessories:
Supplied
081A40 Mounting Stud (1)
ICS-2 NIST-traceable single-axis single-point amplitude response calibration at 6000 cpm (100 Hz) (1)
Optional Versions:
(EX) Hazardous Area Approval- contact factory for specific approvals
  ENGLISH SI
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4 Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
    Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 3=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 3="">
    Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 1=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 1="">
    Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4 Ex ia IIC T4, AExia IIC, T4
(LB) Low Bias Voltage
  ENGLISH SI
    Output Bias Voltage 4.8 to 6.5 4.8 to 6.5
    Excitation Voltage 12 to 28 12 to 28
    Measurement Range ±10 ±98
(M) Metric Mount
  ENGLISH SI
 
Accessories:
     M081A61 Mounting Stud (1)
(TO) Temperature Output
  ENGLISH SI
    Temperature Output Range +36 to +250 °F +2 to +121 °C
    Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
    Electrical Connector Molded Integral Cable Molded Integral Cable
    Electrical Connections (Red) Acceleration Output Acceleration Output
    Electrical Connections (Black) Ground Ground
    Electrical Connections (White) Temperature Output Temperature Output
Weight (with cable) (English) 3.5 oz
Spectral Noise (100 Hz) (SI) 49.1 (µm/sec2)/√Hz
Temperature Range (English) -65 to +250 °F
Sensitivity (±15 %) (SI) 10.2 mV/(m/s²)
Weight (with cable) (SI) 99.3 gm
Size - Hex (English) 9/16 in
Spectral Noise (10 Hz) (SI) 78.5 (µm/sec2)/√Hz
Resonant Frequency (English) 1320 kcpm
Housing Material Stainless Steel
Mounting Torque (SI) 2.7 to 6.8 Nm
Resonant Frequency (SI) 22 kHz
Size - Height (English) 2.5 in
Cable Length (English) 10 ft
Spectral Noise (1 kHz) (English) 4 µg/√Hz
Constant Current Excitation 2 to 20 mA
Size - Height (SI) 64 mm
Electrical Connection Position Top
Overload Limit (Shock) (English) 5000 g pk
Frequency Range (±3 dB) (SI) 0.5 to 10000 Hz
Broadband Resolution (1) (SI) 3434 µm/sec2
Output Bias Voltage 8 to 12 VDC
Size - Hex (SI) 14 mm
Measurement Range (English) ±50 g
Enclosure Rating IP68
Overload Limit (Shock) (SI) 49050 m/s² pk
Sealing Molded
Electrical Isolation (Case) >100000000 Ohm
Output Impedance <150 Ohm
Frequency Range (±3 dB) (English) 30 to 600000 cpm
Sensing Element Ceramic
Temperature Range (SI) -54 to +121 °C
Cable Length (SI) 3 m
Non-Linearity ±1 %
Excitation Voltage 18 to 28 VDC
Sensing Geometry Shear
Cable Type Polyurethane
Sensitivity (±15 %) (English) 100 mV/g
Mounting Thread 1/4-28 Female
Settling Time (within 1% of bias) ≤2.0 sec
Transverse Sensitivity ≤7 %
Spectral Noise (100 Hz) (English) 5 µg/√Hz
Measurement Range (SI) ±490 m/s²
Mounting Torque (English) 2 to 5 ft-lb
Broadband Resolution (1) (English) 350 µg
Spectral Noise (1 kHz) (SI) 39.2 (µm/sec2)/√Hz
Mounting Stud
Discharge Time Constant ≥0.3 sec
Spectral Noise (10 Hz) (English) 8 µg/√Hz
Electrical Connector Molded Integral Cable
$367 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry