$541 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
OVERVIEW
JMG No: 1151371
Part No: EX603C01/ICS-14
Type: Instrument
Availability: 3-4 weeks

Platinum Stock Products; General purpose, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.5 to 10k Hz, top exit, 2-pin connector, single point ISO 17025 accredited calibration

 

Product Specifications
  ENGLISH SI  
Performance
    Sensitivity (±10 %) 100 mV/g 10.2 mV/(m/s²) [1] 
    Measurement Range ±50 g ±490 m/s²  
    Frequency Range (±3 dB) 30 to 600000 cpm 0.5 to 10000 Hz [4] 
    Resonant Frequency 1500 kcpm 25 kHz [2] 
    Broadband Resolution (1) 350 µg 3434 µm/sec2 [2] 
    Non-Linearity ±1 % ±1 % [3] 
    Transverse Sensitivity ≤7 % ≤7 %  
Environmental
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
    Temperature Range -65 to +250 °F -54 to +121 °C  
    Enclosure Rating IP68 IP68  
Electrical
    Settling Time (within 1% of bias) ≤2.0 sec ≤2.0 sec  
    Discharge Time Constant ≥0.3 sec ≥0.3 sec  
    Excitation Voltage 18 to 28 VDC 18 to 28 VDC  
    Constant Current Excitation 2 to 20 mA 2 to 20 mA  
    Output Impedance <150> <150>  
    Output Bias Voltage 8 to 12 VDC 8 to 12 VDC  
    Spectral Noise (10 Hz) 8 µg/√Hz 78.5 (µm/sec2)/√Hz [2] 
    Spectral Noise (100 Hz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [2] 
    Spectral Noise (1 kHz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [2] 
    Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
Physical
    Size - Hex 11/16 in 18 mm  
    Size - Height 1.65 in 42.2 mm  
    Weight 1.8 oz 51 gm  
    Mounting Thread 1/4-28 Female No Metric Equivalent [5] 
    Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm  
    Sensing Element Ceramic Ceramic  
    Sensing Geometry Shear Shear  
    Housing Material Stainless Steel Stainless Steel  
    Sealing Welded Hermetic Welded Hermetic  
    Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015  
    Electrical Connection Position Top Top  
 
All specifications are at room temperature unless otherwise specified.
 
CEceneleccsa_us
Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] The high frequency tolerance is accurate within ±10% of the specified frequency.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.
Accessories:
Supplied
081A40 Mounting Stud (1)
ICS-2 NIST-traceable single-axis single-point amplitude response calibration at 6000 cpm (100 Hz) (1)
Optional Versions:
(EX) Hazardous Area Approval- contact factory for specific approvals
  ENGLISH SI
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4 Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
    Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 1=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 1="">
    Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4 Ex ia IIC T4, AExia IIC, T4
    Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 3=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 3="">
(M) Metric Mount
  ENGLISH SI
 
Accessories:
     M081A61 Mounting Stud (1)
(TO) Temperature Output
  ENGLISH SI
    Temperature Output Range +36 to +250 °F +2 to +121 °C
    Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
    Electrical Connector 3-Pin MIL-C-5015 3-Pin MIL-C-5015
    Electrical Connections (Pin A) Acceleration Output Acceleration Output
    Electrical Connections (Pin B) Ground Ground
    Electrical Connections (Pin C) Temperature Output Temperature Output
    Size - Height 1.86 in 47.2
    Weight 2.0 oz 56.7
    OVERVIEW
    JMG No: 1151371
    Part No: EX603C01/ICS-14
    Type: Instrument
    Availability: 3-4 weeks

    Platinum Stock Products; General purpose, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.5 to 10k Hz, top exit, 2-pin connector, single point ISO 17025 accredited calibration

     

    Product Specifications
      ENGLISH SI  
    Performance
        Sensitivity (±10 %) 100 mV/g 10.2 mV/(m/s²) [1] 
        Measurement Range ±50 g ±490 m/s²  
        Frequency Range (±3 dB) 30 to 600000 cpm 0.5 to 10000 Hz [4] 
        Resonant Frequency 1500 kcpm 25 kHz [2] 
        Broadband Resolution (1) 350 µg 3434 µm/sec2 [2] 
        Non-Linearity ±1 % ±1 % [3] 
        Transverse Sensitivity ≤7 % ≤7 %  
    Environmental
        Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
        Temperature Range -65 to +250 °F -54 to +121 °C  
        Enclosure Rating IP68 IP68  
    Electrical
        Settling Time (within 1% of bias) ≤2.0 sec ≤2.0 sec  
        Discharge Time Constant ≥0.3 sec ≥0.3 sec  
        Excitation Voltage 18 to 28 VDC 18 to 28 VDC  
        Constant Current Excitation 2 to 20 mA 2 to 20 mA  
        Output Impedance <150> <150>  
        Output Bias Voltage 8 to 12 VDC 8 to 12 VDC  
        Spectral Noise (10 Hz) 8 µg/√Hz 78.5 (µm/sec2)/√Hz [2] 
        Spectral Noise (100 Hz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [2] 
        Spectral Noise (1 kHz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [2] 
        Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
    Physical
        Size - Hex 11/16 in 18 mm  
        Size - Height 1.65 in 42.2 mm  
        Weight 1.8 oz 51 gm  
        Mounting Thread 1/4-28 Female No Metric Equivalent [5] 
        Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm  
        Sensing Element Ceramic Ceramic  
        Sensing Geometry Shear Shear  
        Housing Material Stainless Steel Stainless Steel  
        Sealing Welded Hermetic Welded Hermetic  
        Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015  
        Electrical Connection Position Top Top  
     
    All specifications are at room temperature unless otherwise specified.
     
    CEceneleccsa_us
    Product Notes
    [1] Conversion Factor 1g = 9.81 m/s².
    [2] Typical.
    [3] Zero-based, least-squares, straight line method.
    [4] The high frequency tolerance is accurate within ±10% of the specified frequency.
    [5] 1/4-28 has no equivalent in S.I. units.
    [6] See PCB Declaration of Conformance PS023 or PS060 for details.
    Accessories:
    Supplied
    081A40 Mounting Stud (1)
    ICS-2 NIST-traceable single-axis single-point amplitude response calibration at 6000 cpm (100 Hz) (1)
    Optional Versions:
    (EX) Hazardous Area Approval- contact factory for specific approvals
      ENGLISH SI
        Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4 Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
        Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 1=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 1="">
        Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
        Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4 Ex ia IIC T4, AExia IIC, T4
        Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 3=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 3="">
    (M) Metric Mount
      ENGLISH SI
     
    Accessories:
         M081A61 Mounting Stud (1)
    (TO) Temperature Output
      ENGLISH SI
        Temperature Output Range +36 to +250 °F +2 to +121 °C
        Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
        Electrical Connector 3-Pin MIL-C-5015 3-Pin MIL-C-5015
        Electrical Connections (Pin A) Acceleration Output Acceleration Output
        Electrical Connections (Pin B) Ground Ground
        Electrical Connections (Pin C) Temperature Output Temperature Output
        Size - Height 1.86 in 47.2
        Weight 2.0 oz 56.7

      Platinum Stock Products; General purpose, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.5 to 10k Hz, top exit, 2-pin connector, single point ISO 17025 accredited calibration

      OVERVIEW
      JMG No: 1151371
      Part No: EX603C01/ICS-14
      Type: Instrument
      Availability: 3-4 weeks

      Platinum Stock Products; General purpose, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.5 to 10k Hz, top exit, 2-pin connector, single point ISO 17025 accredited calibration

       

      Product Specifications
        ENGLISH SI  
      Performance
          Sensitivity (±10 %) 100 mV/g 10.2 mV/(m/s²) [1] 
          Measurement Range ±50 g ±490 m/s²  
          Frequency Range (±3 dB) 30 to 600000 cpm 0.5 to 10000 Hz [4] 
          Resonant Frequency 1500 kcpm 25 kHz [2] 
          Broadband Resolution (1) 350 µg 3434 µm/sec2 [2] 
          Non-Linearity ±1 % ±1 % [3] 
          Transverse Sensitivity ≤7 % ≤7 %  
      Environmental
          Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
          Temperature Range -65 to +250 °F -54 to +121 °C  
          Enclosure Rating IP68 IP68  
      Electrical
          Settling Time (within 1% of bias) ≤2.0 sec ≤2.0 sec  
          Discharge Time Constant ≥0.3 sec ≥0.3 sec  
          Excitation Voltage 18 to 28 VDC 18 to 28 VDC  
          Constant Current Excitation 2 to 20 mA 2 to 20 mA  
          Output Impedance <150> <150>  
          Output Bias Voltage 8 to 12 VDC 8 to 12 VDC  
          Spectral Noise (10 Hz) 8 µg/√Hz 78.5 (µm/sec2)/√Hz [2] 
          Spectral Noise (100 Hz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [2] 
          Spectral Noise (1 kHz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [2] 
          Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
      Physical
          Size - Hex 11/16 in 18 mm  
          Size - Height 1.65 in 42.2 mm  
          Weight 1.8 oz 51 gm  
          Mounting Thread 1/4-28 Female No Metric Equivalent [5] 
          Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm  
          Sensing Element Ceramic Ceramic  
          Sensing Geometry Shear Shear  
          Housing Material Stainless Steel Stainless Steel  
          Sealing Welded Hermetic Welded Hermetic  
          Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015  
          Electrical Connection Position Top Top  
       
      All specifications are at room temperature unless otherwise specified.
       
      CEceneleccsa_us
      Product Notes
      [1] Conversion Factor 1g = 9.81 m/s².
      [2] Typical.
      [3] Zero-based, least-squares, straight line method.
      [4] The high frequency tolerance is accurate within ±10% of the specified frequency.
      [5] 1/4-28 has no equivalent in S.I. units.
      [6] See PCB Declaration of Conformance PS023 or PS060 for details.
      Accessories:
      Supplied
      081A40 Mounting Stud (1)
      ICS-2 NIST-traceable single-axis single-point amplitude response calibration at 6000 cpm (100 Hz) (1)
      Optional Versions:
      (EX) Hazardous Area Approval- contact factory for specific approvals
        ENGLISH SI
          Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4 Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
          Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 1=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 1="">
          Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
          Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4 Ex ia IIC T4, AExia IIC, T4
          Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 3=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 3="">
      (M) Metric Mount
        ENGLISH SI
       
      Accessories:
           M081A61 Mounting Stud (1)
      (TO) Temperature Output
        ENGLISH SI
          Temperature Output Range +36 to +250 °F +2 to +121 °C
          Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
          Electrical Connector 3-Pin MIL-C-5015 3-Pin MIL-C-5015
          Electrical Connections (Pin A) Acceleration Output Acceleration Output
          Electrical Connections (Pin B) Ground Ground
          Electrical Connections (Pin C) Temperature Output Temperature Output
          Size - Height 1.86 in 47.2
          Weight 2.0 oz 56.7
        OVERVIEW
        JMG No: 1151371
        Part No: EX603C01/ICS-14
        Type: Instrument
        Availability: 3-4 weeks

        Platinum Stock Products; General purpose, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.5 to 10k Hz, top exit, 2-pin connector, single point ISO 17025 accredited calibration

         

        Product Specifications
          ENGLISH SI  
        Performance
            Sensitivity (±10 %) 100 mV/g 10.2 mV/(m/s²) [1] 
            Measurement Range ±50 g ±490 m/s²  
            Frequency Range (±3 dB) 30 to 600000 cpm 0.5 to 10000 Hz [4] 
            Resonant Frequency 1500 kcpm 25 kHz [2] 
            Broadband Resolution (1) 350 µg 3434 µm/sec2 [2] 
            Non-Linearity ±1 % ±1 % [3] 
            Transverse Sensitivity ≤7 % ≤7 %  
        Environmental
            Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
            Temperature Range -65 to +250 °F -54 to +121 °C  
            Enclosure Rating IP68 IP68  
        Electrical
            Settling Time (within 1% of bias) ≤2.0 sec ≤2.0 sec  
            Discharge Time Constant ≥0.3 sec ≥0.3 sec  
            Excitation Voltage 18 to 28 VDC 18 to 28 VDC  
            Constant Current Excitation 2 to 20 mA 2 to 20 mA  
            Output Impedance <150> <150>  
            Output Bias Voltage 8 to 12 VDC 8 to 12 VDC  
            Spectral Noise (10 Hz) 8 µg/√Hz 78.5 (µm/sec2)/√Hz [2] 
            Spectral Noise (100 Hz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [2] 
            Spectral Noise (1 kHz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [2] 
            Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
        Physical
            Size - Hex 11/16 in 18 mm  
            Size - Height 1.65 in 42.2 mm  
            Weight 1.8 oz 51 gm  
            Mounting Thread 1/4-28 Female No Metric Equivalent [5] 
            Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm  
            Sensing Element Ceramic Ceramic  
            Sensing Geometry Shear Shear  
            Housing Material Stainless Steel Stainless Steel  
            Sealing Welded Hermetic Welded Hermetic  
            Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015  
            Electrical Connection Position Top Top  
         
        All specifications are at room temperature unless otherwise specified.
         
        CEceneleccsa_us
        Product Notes
        [1] Conversion Factor 1g = 9.81 m/s².
        [2] Typical.
        [3] Zero-based, least-squares, straight line method.
        [4] The high frequency tolerance is accurate within ±10% of the specified frequency.
        [5] 1/4-28 has no equivalent in S.I. units.
        [6] See PCB Declaration of Conformance PS023 or PS060 for details.
        Accessories:
        Supplied
        081A40 Mounting Stud (1)
        ICS-2 NIST-traceable single-axis single-point amplitude response calibration at 6000 cpm (100 Hz) (1)
        Optional Versions:
        (EX) Hazardous Area Approval- contact factory for specific approvals
          ENGLISH SI
            Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4 Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
            Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 1=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 1="">
            Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
            Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4 Ex ia IIC T4, AExia IIC, T4
            Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 3=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 3="">
        (M) Metric Mount
          ENGLISH SI
         
        Accessories:
             M081A61 Mounting Stud (1)
        (TO) Temperature Output
          ENGLISH SI
            Temperature Output Range +36 to +250 °F +2 to +121 °C
            Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
            Electrical Connector 3-Pin MIL-C-5015 3-Pin MIL-C-5015
            Electrical Connections (Pin A) Acceleration Output Acceleration Output
            Electrical Connections (Pin B) Ground Ground
            Electrical Connections (Pin C) Temperature Output Temperature Output
            Size - Height 1.86 in 47.2
            Weight 2.0 oz 56.7
          $541 AUD (Ex. GST)
          Qty:
          Enquiry sent successfully
          Product Enquiry