$5849 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
OVERVIEW
SPECIFICATIONS
JMG No: 1071218
Part No: 394C06
Type: Instrument
Availability: Within 14 days

Hand-Held Shaker
Handheld shaker, 1g at 159.2 Hz (for up to 210 grams total weight of sensor, cable and mounting accessories).


Product Specifications
  ENGLISH SI  
Performance
    Operating Frequency (±1 %) 159.2 Hz 159.2 Hz  
    Acceleration Output (±3 %) 1.00 g rms 9.81 m/s² rms [4] 
    Velocity Output 0.39 in/sec rms 9.81 mm/s rms [1] 
    Displacement Output 0.39 mil rms 9.81 µm rms [1] 
    Transverse Output ≤3 % ≤3 %  
    Distortion (0 to 99 grams load) ≤2 % ≤2 %  
    Distortion (100 to 149 grams load) ≤5 % ≤5 %  
    Distortion (150 to 210 grams load) ≤9 % ≤9 %  
    Maximum Load 7.4 oz 210 gm [3] 
    Automatic Switch Off Time 1.0 to 2.5 minutes 1.0 to 2.5 minutes [2] 
    Calibration Cycles (2 gram load) 320 cycles 320 cycles [5] 
    Calibration Cycles (25 gram load) 600 cycles 600 cycles [5] 
    Calibration Cycles (50 gram load) 1600 cycles 1600 cycles [5] 
    Calibration Cycles (100 gram load) 400 cycles 400 cycles [5] 
    Calibration Cycles (150 gram load) 160 cycles 160 cycles [5] 
    Calibration Cycles (210 gram load) 80 cycles 80 cycles [5] 
Environmental
    Temperature Range (Operating) +15 to +130 °F -10 to +55 °C  
Electrical
    Ramp-Up time ≤3 sec ≤3 sec [6] 
    Internal Battery (Quantity) 4 4  
    Internal Battery (Type) AA AA [7] 
    DC Power 10 VDC 10 VDC [8] 
    DC Power 2.4 Amps 2.4 Amps [9][8] 
    Battery Life (2 gram load) 8 hours 8 hours [5] 
    Battery Life (25 gram load) 15 hours 15 hours [5] 
    Battery Life (50 gram load) 40 hours 40 hours [5] 
    Battery Life (100 gram load) 10 hours 10 hours [5] 
    Battery Life (150 gram load) 4 hours 4 hours [5] 
    Battery Life (210 gram load) 2 hours 2 hours [5] 
Physical
    Size - Diameter 2.2 in 56 mm  
    Size - Height 7.8 in 200 mm  
    Weight (with batteries) 31 oz 900 gm [6] 
    Mounting Thread 10-32 Female 10-32 Female [11][10] 
    Mounting Torque (Maximum) 10 in-lb 112 N-cm [10] 

All specifications are at room temperature unless otherwise specified.

CE
Product Notes
[1] Calculated values for reference only.
[2] Unit supplied set to auto shut off; see manual for continuous use selection.
[3] Maximum load includes sensor, connector and cabling.
[4] Unit supplied set to rms; see manual for peak selection.
[5] Approximate values, based on automatic switch off time and dependent on type of batteries.
[6] Typical.
[7] Alkaline type recommended for longest service life.
[8] This specification for external DC power supply (optional).
[9] Maximum.
[10] Transducer to shaker table.
[11] Test sensor should be hand tightened (without tools).
[12] See PCB Declaration of Conformance PS022 for details.
Accessories:
Optional
073A16 (1)
080A150 Mounting Base (1/4-28) (1)
080B44 3-Pin Mounting Adapter (1)
Supplied
073A15 Battery Pack (1)
080A109 Petro Wax (1)
080A84 Mounting Base (5-40 to 10-32) (1)
080A85 Mounting Base (M3 X 0.5 to 10-32) (1)
081A08 Mounting Stud (10-32 to 1/4-28) (1)
081B05 Mounting Stud (10-32 to 10-32) (2)
M081B05 Mounting Stud 10-32 to M6 X 0.75 (1)
M081B23 Metric mounting stud, 10-32 to M5 x 0.80 long (1)
Optional Versions:
(M) Metric Mount
  ENGLISH SI
    Acceleration Output (±3 %) 1.02 g rms 10.0 m/s² rms
Displacement Output (SI) 9.81 µm rms
Battery Life (210 gram load) 2 hours
Battery Life (25 gram load) 15 hours
Weight (with batteries) (English) 31 oz
Acceleration Output (±3 %) (English) 1.00 g rms
Calibration Cycles (100 gram load) 400 cycles
Internal Battery (Quantity) 4
Calibration Cycles (150 gram load) 160 cycles
Battery Life (100 gram load) 10 hours
Calibration Cycles (50 gram load) 1600 cycles
Displacement Output (English) 0.39 mil rms
Size - Height (English) 7.8 in
Acceleration Output (±3 %) (SI) 9.81 m/s² rms
Battery Life (150 gram load) 4 hours
Size - Diameter (English) 2.2 in
Distortion (0 to 99 grams load) ≤2 %
Size - Height (SI) 200 mm
Weight (with batteries) (SI) 900 gm
Calibration Cycles (25 gram load) 600 cycles
Maximum Load (SI) 210 gm
Mounting Torque (Maximum) (SI) 112 N-cm
Calibration Cycles (2 gram load) 320 cycles
Velocity Output (SI) 9.81 mm/s rms
Operating Frequency (±1 %) 159.2 Hz
Calibration Cycles (210 gram load) 80 cycles
Temperature Range (Operating) (SI) -10 to +55 °C
Maximum Load (English) 7.4 oz
Mounting Thread 10-32 Female
Transverse Output ≤3 %
Temperature Range (Operating) (English) +15 to +130 °F
Battery Life (2 gram load) 8 hours
Size - Diameter (SI) 56 mm
Distortion (100 to 149 grams load) ≤5 %
Ramp-Up time ≤3 sec
Automatic Switch Off Time 1.0 to 2.5 minutes
Distortion (150 to 210 grams load) ≤9 %
Battery Life (50 gram load) 40 hours
Velocity Output (English) 0.39 in/sec rms
Mounting Torque (Maximum) (English) 10 in-lb
DC Power 10 VDC
DC Power 2.4 Amps
Internal Battery (Type) AA
    OVERVIEW
    SPECIFICATIONS
    JMG No: 1071218
    Part No: 394C06
    Type: Instrument
    Availability: Within 14 days

    Hand-Held Shaker
    Handheld shaker, 1g at 159.2 Hz (for up to 210 grams total weight of sensor, cable and mounting accessories).


    Product Specifications
      ENGLISH SI  
    Performance
        Operating Frequency (±1 %) 159.2 Hz 159.2 Hz  
        Acceleration Output (±3 %) 1.00 g rms 9.81 m/s² rms [4] 
        Velocity Output 0.39 in/sec rms 9.81 mm/s rms [1] 
        Displacement Output 0.39 mil rms 9.81 µm rms [1] 
        Transverse Output ≤3 % ≤3 %  
        Distortion (0 to 99 grams load) ≤2 % ≤2 %  
        Distortion (100 to 149 grams load) ≤5 % ≤5 %  
        Distortion (150 to 210 grams load) ≤9 % ≤9 %  
        Maximum Load 7.4 oz 210 gm [3] 
        Automatic Switch Off Time 1.0 to 2.5 minutes 1.0 to 2.5 minutes [2] 
        Calibration Cycles (2 gram load) 320 cycles 320 cycles [5] 
        Calibration Cycles (25 gram load) 600 cycles 600 cycles [5] 
        Calibration Cycles (50 gram load) 1600 cycles 1600 cycles [5] 
        Calibration Cycles (100 gram load) 400 cycles 400 cycles [5] 
        Calibration Cycles (150 gram load) 160 cycles 160 cycles [5] 
        Calibration Cycles (210 gram load) 80 cycles 80 cycles [5] 
    Environmental
        Temperature Range (Operating) +15 to +130 °F -10 to +55 °C  
    Electrical
        Ramp-Up time ≤3 sec ≤3 sec [6] 
        Internal Battery (Quantity) 4 4  
        Internal Battery (Type) AA AA [7] 
        DC Power 10 VDC 10 VDC [8] 
        DC Power 2.4 Amps 2.4 Amps [9][8] 
        Battery Life (2 gram load) 8 hours 8 hours [5] 
        Battery Life (25 gram load) 15 hours 15 hours [5] 
        Battery Life (50 gram load) 40 hours 40 hours [5] 
        Battery Life (100 gram load) 10 hours 10 hours [5] 
        Battery Life (150 gram load) 4 hours 4 hours [5] 
        Battery Life (210 gram load) 2 hours 2 hours [5] 
    Physical
        Size - Diameter 2.2 in 56 mm  
        Size - Height 7.8 in 200 mm  
        Weight (with batteries) 31 oz 900 gm [6] 
        Mounting Thread 10-32 Female 10-32 Female [11][10] 
        Mounting Torque (Maximum) 10 in-lb 112 N-cm [10] 

    All specifications are at room temperature unless otherwise specified.

    CE
    Product Notes
    [1] Calculated values for reference only.
    [2] Unit supplied set to auto shut off; see manual for continuous use selection.
    [3] Maximum load includes sensor, connector and cabling.
    [4] Unit supplied set to rms; see manual for peak selection.
    [5] Approximate values, based on automatic switch off time and dependent on type of batteries.
    [6] Typical.
    [7] Alkaline type recommended for longest service life.
    [8] This specification for external DC power supply (optional).
    [9] Maximum.
    [10] Transducer to shaker table.
    [11] Test sensor should be hand tightened (without tools).
    [12] See PCB Declaration of Conformance PS022 for details.
    Accessories:
    Optional
    073A16 (1)
    080A150 Mounting Base (1/4-28) (1)
    080B44 3-Pin Mounting Adapter (1)
    Supplied
    073A15 Battery Pack (1)
    080A109 Petro Wax (1)
    080A84 Mounting Base (5-40 to 10-32) (1)
    080A85 Mounting Base (M3 X 0.5 to 10-32) (1)
    081A08 Mounting Stud (10-32 to 1/4-28) (1)
    081B05 Mounting Stud (10-32 to 10-32) (2)
    M081B05 Mounting Stud 10-32 to M6 X 0.75 (1)
    M081B23 Metric mounting stud, 10-32 to M5 x 0.80 long (1)
    Optional Versions:
    (M) Metric Mount
      ENGLISH SI
        Acceleration Output (±3 %) 1.02 g rms 10.0 m/s² rms
    Displacement Output (SI) 9.81 µm rms
    Battery Life (210 gram load) 2 hours
    Battery Life (25 gram load) 15 hours
    Weight (with batteries) (English) 31 oz
    Acceleration Output (±3 %) (English) 1.00 g rms
    Calibration Cycles (100 gram load) 400 cycles
    Internal Battery (Quantity) 4
    Calibration Cycles (150 gram load) 160 cycles
    Battery Life (100 gram load) 10 hours
    Calibration Cycles (50 gram load) 1600 cycles
    Displacement Output (English) 0.39 mil rms
    Size - Height (English) 7.8 in
    Acceleration Output (±3 %) (SI) 9.81 m/s² rms
    Battery Life (150 gram load) 4 hours
    Size - Diameter (English) 2.2 in
    Distortion (0 to 99 grams load) ≤2 %
    Size - Height (SI) 200 mm
    Weight (with batteries) (SI) 900 gm
    Calibration Cycles (25 gram load) 600 cycles
    Maximum Load (SI) 210 gm
    Mounting Torque (Maximum) (SI) 112 N-cm
    Calibration Cycles (2 gram load) 320 cycles
    Velocity Output (SI) 9.81 mm/s rms
    Operating Frequency (±1 %) 159.2 Hz
    Calibration Cycles (210 gram load) 80 cycles
    Temperature Range (Operating) (SI) -10 to +55 °C
    Maximum Load (English) 7.4 oz
    Mounting Thread 10-32 Female
    Transverse Output ≤3 %
    Temperature Range (Operating) (English) +15 to +130 °F
    Battery Life (2 gram load) 8 hours
    Size - Diameter (SI) 56 mm
    Distortion (100 to 149 grams load) ≤5 %
    Ramp-Up time ≤3 sec
    Automatic Switch Off Time 1.0 to 2.5 minutes
    Distortion (150 to 210 grams load) ≤9 %
    Battery Life (50 gram load) 40 hours
    Velocity Output (English) 0.39 in/sec rms
    Mounting Torque (Maximum) (English) 10 in-lb
    DC Power 10 VDC
    DC Power 2.4 Amps
    Internal Battery (Type) AA

      Handheld shaker, 1g at 159.2 Hz (for up to 210 grams total weight of sensor, cable and mounting accessories).

      OVERVIEW
      SPECIFICATIONS
      JMG No: 1071218
      Part No: 394C06
      Type: Instrument
      Availability: Within 14 days

      Hand-Held Shaker
      Handheld shaker, 1g at 159.2 Hz (for up to 210 grams total weight of sensor, cable and mounting accessories).


      Product Specifications
        ENGLISH SI  
      Performance
          Operating Frequency (±1 %) 159.2 Hz 159.2 Hz  
          Acceleration Output (±3 %) 1.00 g rms 9.81 m/s² rms [4] 
          Velocity Output 0.39 in/sec rms 9.81 mm/s rms [1] 
          Displacement Output 0.39 mil rms 9.81 µm rms [1] 
          Transverse Output ≤3 % ≤3 %  
          Distortion (0 to 99 grams load) ≤2 % ≤2 %  
          Distortion (100 to 149 grams load) ≤5 % ≤5 %  
          Distortion (150 to 210 grams load) ≤9 % ≤9 %  
          Maximum Load 7.4 oz 210 gm [3] 
          Automatic Switch Off Time 1.0 to 2.5 minutes 1.0 to 2.5 minutes [2] 
          Calibration Cycles (2 gram load) 320 cycles 320 cycles [5] 
          Calibration Cycles (25 gram load) 600 cycles 600 cycles [5] 
          Calibration Cycles (50 gram load) 1600 cycles 1600 cycles [5] 
          Calibration Cycles (100 gram load) 400 cycles 400 cycles [5] 
          Calibration Cycles (150 gram load) 160 cycles 160 cycles [5] 
          Calibration Cycles (210 gram load) 80 cycles 80 cycles [5] 
      Environmental
          Temperature Range (Operating) +15 to +130 °F -10 to +55 °C  
      Electrical
          Ramp-Up time ≤3 sec ≤3 sec [6] 
          Internal Battery (Quantity) 4 4  
          Internal Battery (Type) AA AA [7] 
          DC Power 10 VDC 10 VDC [8] 
          DC Power 2.4 Amps 2.4 Amps [9][8] 
          Battery Life (2 gram load) 8 hours 8 hours [5] 
          Battery Life (25 gram load) 15 hours 15 hours [5] 
          Battery Life (50 gram load) 40 hours 40 hours [5] 
          Battery Life (100 gram load) 10 hours 10 hours [5] 
          Battery Life (150 gram load) 4 hours 4 hours [5] 
          Battery Life (210 gram load) 2 hours 2 hours [5] 
      Physical
          Size - Diameter 2.2 in 56 mm  
          Size - Height 7.8 in 200 mm  
          Weight (with batteries) 31 oz 900 gm [6] 
          Mounting Thread 10-32 Female 10-32 Female [11][10] 
          Mounting Torque (Maximum) 10 in-lb 112 N-cm [10] 

      All specifications are at room temperature unless otherwise specified.

      CE
      Product Notes
      [1] Calculated values for reference only.
      [2] Unit supplied set to auto shut off; see manual for continuous use selection.
      [3] Maximum load includes sensor, connector and cabling.
      [4] Unit supplied set to rms; see manual for peak selection.
      [5] Approximate values, based on automatic switch off time and dependent on type of batteries.
      [6] Typical.
      [7] Alkaline type recommended for longest service life.
      [8] This specification for external DC power supply (optional).
      [9] Maximum.
      [10] Transducer to shaker table.
      [11] Test sensor should be hand tightened (without tools).
      [12] See PCB Declaration of Conformance PS022 for details.
      Accessories:
      Optional
      073A16 (1)
      080A150 Mounting Base (1/4-28) (1)
      080B44 3-Pin Mounting Adapter (1)
      Supplied
      073A15 Battery Pack (1)
      080A109 Petro Wax (1)
      080A84 Mounting Base (5-40 to 10-32) (1)
      080A85 Mounting Base (M3 X 0.5 to 10-32) (1)
      081A08 Mounting Stud (10-32 to 1/4-28) (1)
      081B05 Mounting Stud (10-32 to 10-32) (2)
      M081B05 Mounting Stud 10-32 to M6 X 0.75 (1)
      M081B23 Metric mounting stud, 10-32 to M5 x 0.80 long (1)
      Optional Versions:
      (M) Metric Mount
        ENGLISH SI
          Acceleration Output (±3 %) 1.02 g rms 10.0 m/s² rms
      Displacement Output (SI) 9.81 µm rms
      Battery Life (210 gram load) 2 hours
      Battery Life (25 gram load) 15 hours
      Weight (with batteries) (English) 31 oz
      Acceleration Output (±3 %) (English) 1.00 g rms
      Calibration Cycles (100 gram load) 400 cycles
      Internal Battery (Quantity) 4
      Calibration Cycles (150 gram load) 160 cycles
      Battery Life (100 gram load) 10 hours
      Calibration Cycles (50 gram load) 1600 cycles
      Displacement Output (English) 0.39 mil rms
      Size - Height (English) 7.8 in
      Acceleration Output (±3 %) (SI) 9.81 m/s² rms
      Battery Life (150 gram load) 4 hours
      Size - Diameter (English) 2.2 in
      Distortion (0 to 99 grams load) ≤2 %
      Size - Height (SI) 200 mm
      Weight (with batteries) (SI) 900 gm
      Calibration Cycles (25 gram load) 600 cycles
      Maximum Load (SI) 210 gm
      Mounting Torque (Maximum) (SI) 112 N-cm
      Calibration Cycles (2 gram load) 320 cycles
      Velocity Output (SI) 9.81 mm/s rms
      Operating Frequency (±1 %) 159.2 Hz
      Calibration Cycles (210 gram load) 80 cycles
      Temperature Range (Operating) (SI) -10 to +55 °C
      Maximum Load (English) 7.4 oz
      Mounting Thread 10-32 Female
      Transverse Output ≤3 %
      Temperature Range (Operating) (English) +15 to +130 °F
      Battery Life (2 gram load) 8 hours
      Size - Diameter (SI) 56 mm
      Distortion (100 to 149 grams load) ≤5 %
      Ramp-Up time ≤3 sec
      Automatic Switch Off Time 1.0 to 2.5 minutes
      Distortion (150 to 210 grams load) ≤9 %
      Battery Life (50 gram load) 40 hours
      Velocity Output (English) 0.39 in/sec rms
      Mounting Torque (Maximum) (English) 10 in-lb
      DC Power 10 VDC
      DC Power 2.4 Amps
      Internal Battery (Type) AA
        OVERVIEW
        SPECIFICATIONS
        JMG No: 1071218
        Part No: 394C06
        Type: Instrument
        Availability: Within 14 days

        Hand-Held Shaker
        Handheld shaker, 1g at 159.2 Hz (for up to 210 grams total weight of sensor, cable and mounting accessories).


        Product Specifications
          ENGLISH SI  
        Performance
            Operating Frequency (±1 %) 159.2 Hz 159.2 Hz  
            Acceleration Output (±3 %) 1.00 g rms 9.81 m/s² rms [4] 
            Velocity Output 0.39 in/sec rms 9.81 mm/s rms [1] 
            Displacement Output 0.39 mil rms 9.81 µm rms [1] 
            Transverse Output ≤3 % ≤3 %  
            Distortion (0 to 99 grams load) ≤2 % ≤2 %  
            Distortion (100 to 149 grams load) ≤5 % ≤5 %  
            Distortion (150 to 210 grams load) ≤9 % ≤9 %  
            Maximum Load 7.4 oz 210 gm [3] 
            Automatic Switch Off Time 1.0 to 2.5 minutes 1.0 to 2.5 minutes [2] 
            Calibration Cycles (2 gram load) 320 cycles 320 cycles [5] 
            Calibration Cycles (25 gram load) 600 cycles 600 cycles [5] 
            Calibration Cycles (50 gram load) 1600 cycles 1600 cycles [5] 
            Calibration Cycles (100 gram load) 400 cycles 400 cycles [5] 
            Calibration Cycles (150 gram load) 160 cycles 160 cycles [5] 
            Calibration Cycles (210 gram load) 80 cycles 80 cycles [5] 
        Environmental
            Temperature Range (Operating) +15 to +130 °F -10 to +55 °C  
        Electrical
            Ramp-Up time ≤3 sec ≤3 sec [6] 
            Internal Battery (Quantity) 4 4  
            Internal Battery (Type) AA AA [7] 
            DC Power 10 VDC 10 VDC [8] 
            DC Power 2.4 Amps 2.4 Amps [9][8] 
            Battery Life (2 gram load) 8 hours 8 hours [5] 
            Battery Life (25 gram load) 15 hours 15 hours [5] 
            Battery Life (50 gram load) 40 hours 40 hours [5] 
            Battery Life (100 gram load) 10 hours 10 hours [5] 
            Battery Life (150 gram load) 4 hours 4 hours [5] 
            Battery Life (210 gram load) 2 hours 2 hours [5] 
        Physical
            Size - Diameter 2.2 in 56 mm  
            Size - Height 7.8 in 200 mm  
            Weight (with batteries) 31 oz 900 gm [6] 
            Mounting Thread 10-32 Female 10-32 Female [11][10] 
            Mounting Torque (Maximum) 10 in-lb 112 N-cm [10] 

        All specifications are at room temperature unless otherwise specified.

        CE
        Product Notes
        [1] Calculated values for reference only.
        [2] Unit supplied set to auto shut off; see manual for continuous use selection.
        [3] Maximum load includes sensor, connector and cabling.
        [4] Unit supplied set to rms; see manual for peak selection.
        [5] Approximate values, based on automatic switch off time and dependent on type of batteries.
        [6] Typical.
        [7] Alkaline type recommended for longest service life.
        [8] This specification for external DC power supply (optional).
        [9] Maximum.
        [10] Transducer to shaker table.
        [11] Test sensor should be hand tightened (without tools).
        [12] See PCB Declaration of Conformance PS022 for details.
        Accessories:
        Optional
        073A16 (1)
        080A150 Mounting Base (1/4-28) (1)
        080B44 3-Pin Mounting Adapter (1)
        Supplied
        073A15 Battery Pack (1)
        080A109 Petro Wax (1)
        080A84 Mounting Base (5-40 to 10-32) (1)
        080A85 Mounting Base (M3 X 0.5 to 10-32) (1)
        081A08 Mounting Stud (10-32 to 1/4-28) (1)
        081B05 Mounting Stud (10-32 to 10-32) (2)
        M081B05 Mounting Stud 10-32 to M6 X 0.75 (1)
        M081B23 Metric mounting stud, 10-32 to M5 x 0.80 long (1)
        Optional Versions:
        (M) Metric Mount
          ENGLISH SI
            Acceleration Output (±3 %) 1.02 g rms 10.0 m/s² rms
        Displacement Output (SI) 9.81 µm rms
        Battery Life (210 gram load) 2 hours
        Battery Life (25 gram load) 15 hours
        Weight (with batteries) (English) 31 oz
        Acceleration Output (±3 %) (English) 1.00 g rms
        Calibration Cycles (100 gram load) 400 cycles
        Internal Battery (Quantity) 4
        Calibration Cycles (150 gram load) 160 cycles
        Battery Life (100 gram load) 10 hours
        Calibration Cycles (50 gram load) 1600 cycles
        Displacement Output (English) 0.39 mil rms
        Size - Height (English) 7.8 in
        Acceleration Output (±3 %) (SI) 9.81 m/s² rms
        Battery Life (150 gram load) 4 hours
        Size - Diameter (English) 2.2 in
        Distortion (0 to 99 grams load) ≤2 %
        Size - Height (SI) 200 mm
        Weight (with batteries) (SI) 900 gm
        Calibration Cycles (25 gram load) 600 cycles
        Maximum Load (SI) 210 gm
        Mounting Torque (Maximum) (SI) 112 N-cm
        Calibration Cycles (2 gram load) 320 cycles
        Velocity Output (SI) 9.81 mm/s rms
        Operating Frequency (±1 %) 159.2 Hz
        Calibration Cycles (210 gram load) 80 cycles
        Temperature Range (Operating) (SI) -10 to +55 °C
        Maximum Load (English) 7.4 oz
        Mounting Thread 10-32 Female
        Transverse Output ≤3 %
        Temperature Range (Operating) (English) +15 to +130 °F
        Battery Life (2 gram load) 8 hours
        Size - Diameter (SI) 56 mm
        Distortion (100 to 149 grams load) ≤5 %
        Ramp-Up time ≤3 sec
        Automatic Switch Off Time 1.0 to 2.5 minutes
        Distortion (150 to 210 grams load) ≤9 %
        Battery Life (50 gram load) 40 hours
        Velocity Output (English) 0.39 in/sec rms
        Mounting Torque (Maximum) (English) 10 in-lb
        DC Power 10 VDC
        DC Power 2.4 Amps
        Internal Battery (Type) AA
          $5849 AUD (Ex. GST)
          Qty:
          Enquiry sent successfully
          Product Enquiry