$196 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
OVERVIEW
SPECIFICATIONS
DOWNLOADS
JMG No: 1090411
Part No: 603C01
Stock: Expecting Stock

Platinum Low-cost Industrial ICP® Accelerometer
Platinum Stock Products; General purpose, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.5 to 10k Hz, top exit, 2-pin connector, single point ISO 17025 accredited calibration
IMI guarantees this item can ship immediately else shipping is free.
 

Product Specifications
  ENGLISH SI  
Performance
    Sensitivity (±10 %) 100 mV/g 10.2 mV/(m/s²) [1] 
    Measurement Range ±50 g ±490 m/s²  
    Frequency Range (±3 dB) 30 to 600000 cpm 0.5 to 10000 Hz [4] 
    Resonant Frequency 1500 kcpm 25 kHz [2] 
    Broadband Resolution (1) 350 µg 3434 µm/sec2 [2] 
    Non-Linearity ±1 % ±1 % [3] 
    Transverse Sensitivity ≤7 % ≤7 %  
Environmental
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
    Temperature Range -65 to +250 °F -54 to +121 °C  
    Enclosure Rating IP68 IP68  
Electrical
    Settling Time (within 1% of bias) ≤2.0 sec ≤2.0 sec  
    Discharge Time Constant ≥0.3 sec ≥0.3 sec  
    Excitation Voltage 18 to 28 VDC 18 to 28 VDC  
    Constant Current Excitation 2 to 20 mA 2 to 20 mA  
    Output Impedance <150> <150>  
    Output Bias Voltage 8 to 12 VDC 8 to 12 VDC  
    Spectral Noise (10 Hz) 8 µg/√Hz 78.5 (µm/sec2)/√Hz [2] 
    Spectral Noise (100 Hz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [2] 
    Spectral Noise (1 kHz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [2] 
    Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
Physical
    Size - Hex 11/16 in 18 mm  
    Size - Height 1.65 in 42.2 mm  
    Weight 1.8 oz 51 gm  
    Mounting Thread 1/4-28 Female No Metric Equivalent [5] 
    Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm  
    Sensing Element Ceramic Ceramic  
    Sensing Geometry Shear Shear  
    Housing Material Stainless Steel Stainless Steel  
    Sealing Welded Hermetic Welded Hermetic  
    Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015  
    Electrical Connection Position Top Top  
 

All specifications are at room temperature unless otherwise specified.

 

CEceneleccsa_us

Product Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] The high frequency tolerance is accurate within ±10% of the specified frequency.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.

Accessories:
Supplied
081A40 Mounting Stud (1)
ICS-2 NIST-traceable single-axis single-point amplitude response calibration at 6000 cpm (100 Hz) (1)
Optional Versions:

(EX) Hazardous Area Approval- contact factory for specific approvals

  ENGLISH SI
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4 Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
    Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 1=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 1="">
    Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4 Ex ia IIC T4, AExia IIC, T4
    Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 3=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 3="">

(M) Metric Mount

  ENGLISH SI
 
Accessories:
     M081A61 Mounting Stud (1)

(TO) Temperature Output

  ENGLISH SI
    Temperature Output Range +36 to +250 °F +2 to +121 °C
    Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
    Electrical Connector 3-Pin MIL-C-5015 3-Pin MIL-C-5015
    Electrical Connections (Pin A) Acceleration Output Acceleration Output
    Electrical Connections (Pin B) Ground Ground
    Electrical Connections (Pin C) Temperature Output Temperature Output
    Size - Height 1.86 in 47.2
    Weight 2.0 oz 56.7
Spectral Noise (100 Hz) (SI) 49.1 (µm/sec2)/√Hz
Temperature Range (English) -65 to +250 °F
Size - Hex (English) 11/16 in
Spectral Noise (10 Hz) (SI) 78.5 (µm/sec2)/√Hz
Resonant Frequency (English) 1500 kcpm
Housing Material Stainless Steel
Mounting Torque (SI) 2.7 to 6.8 Nm
Resonant Frequency (SI) 25 kHz
Size - Height (English) 1.65 in
Spectral Noise (1 kHz) (English) 4 µg/√Hz
Constant Current Excitation 2 to 20 mA
Size - Height (SI) 42.2 mm
Electrical Connection Position Top
Overload Limit (Shock) (English) 5000 g pk
Frequency Range (±3 dB) (SI) 0.5 to 10000 Hz
Broadband Resolution (1) (SI) 3434 µm/sec2
Output Bias Voltage 8 to 12 VDC
Mounting Thread (SI) No Metric Equivalent
Size - Hex (SI) 18 mm
Measurement Range (English) ±50 g
Enclosure Rating IP68
Sensitivity (±10 %) (SI) 10.2 mV/(m/s²)
Overload Limit (Shock) (SI) 49050 m/s² pk
Sealing Welded Hermetic
Electrical Isolation (Case) >100000000 Ohm
Output Impedance <150 Ohm
Frequency Range (±3 dB) (English) 30 to 600000 cpm
Sensing Element Ceramic
Temperature Range (SI) -54 to +121 °C
Non-Linearity ±1 %
Excitation Voltage 18 to 28 VDC
Sensing Geometry Shear
Settling Time (within 1% of bias) ≤2.0 sec
Weight (SI) 51 gm
Weight (English) 1.8 oz
Transverse Sensitivity ≤7 %
Spectral Noise (100 Hz) (English) 5 µg/√Hz
Sensitivity (±10 %) (English) 100 mV/g
Mounting Thread (English) 1/4-28 Female
Measurement Range (SI) ±490 m/s²
Mounting Torque (English) 2 to 5 ft-lb
Broadband Resolution (1) (English) 350 µg
Spectral Noise (1 kHz) (SI) 39.2 (µm/sec2)/√Hz
Discharge Time Constant ≥0.3 sec
Spectral Noise (10 Hz) (English) 8 µg/√Hz
Electrical Connector 2-Pin MIL-C-5015
OVERVIEW
SPECIFICATIONS
DOWNLOADS
JMG No: 1090411
Part No: 603C01
Stock: Expecting Stock

Platinum Low-cost Industrial ICP® Accelerometer
Platinum Stock Products; General purpose, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.5 to 10k Hz, top exit, 2-pin connector, single point ISO 17025 accredited calibration
IMI guarantees this item can ship immediately else shipping is free.
 

Product Specifications
  ENGLISH SI  
Performance
    Sensitivity (±10 %) 100 mV/g 10.2 mV/(m/s²) [1] 
    Measurement Range ±50 g ±490 m/s²  
    Frequency Range (±3 dB) 30 to 600000 cpm 0.5 to 10000 Hz [4] 
    Resonant Frequency 1500 kcpm 25 kHz [2] 
    Broadband Resolution (1) 350 µg 3434 µm/sec2 [2] 
    Non-Linearity ±1 % ±1 % [3] 
    Transverse Sensitivity ≤7 % ≤7 %  
Environmental
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
    Temperature Range -65 to +250 °F -54 to +121 °C  
    Enclosure Rating IP68 IP68  
Electrical
    Settling Time (within 1% of bias) ≤2.0 sec ≤2.0 sec  
    Discharge Time Constant ≥0.3 sec ≥0.3 sec  
    Excitation Voltage 18 to 28 VDC 18 to 28 VDC  
    Constant Current Excitation 2 to 20 mA 2 to 20 mA  
    Output Impedance <150> <150>  
    Output Bias Voltage 8 to 12 VDC 8 to 12 VDC  
    Spectral Noise (10 Hz) 8 µg/√Hz 78.5 (µm/sec2)/√Hz [2] 
    Spectral Noise (100 Hz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [2] 
    Spectral Noise (1 kHz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [2] 
    Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
Physical
    Size - Hex 11/16 in 18 mm  
    Size - Height 1.65 in 42.2 mm  
    Weight 1.8 oz 51 gm  
    Mounting Thread 1/4-28 Female No Metric Equivalent [5] 
    Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm  
    Sensing Element Ceramic Ceramic  
    Sensing Geometry Shear Shear  
    Housing Material Stainless Steel Stainless Steel  
    Sealing Welded Hermetic Welded Hermetic  
    Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015  
    Electrical Connection Position Top Top  
 

All specifications are at room temperature unless otherwise specified.

 

CEceneleccsa_us

Product Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] The high frequency tolerance is accurate within ±10% of the specified frequency.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.

Accessories:
Supplied
081A40 Mounting Stud (1)
ICS-2 NIST-traceable single-axis single-point amplitude response calibration at 6000 cpm (100 Hz) (1)
Optional Versions:

(EX) Hazardous Area Approval- contact factory for specific approvals

  ENGLISH SI
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4 Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
    Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 1=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 1="">
    Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4 Ex ia IIC T4, AExia IIC, T4
    Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 3=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 3="">

(M) Metric Mount

  ENGLISH SI
 
Accessories:
     M081A61 Mounting Stud (1)

(TO) Temperature Output

  ENGLISH SI
    Temperature Output Range +36 to +250 °F +2 to +121 °C
    Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
    Electrical Connector 3-Pin MIL-C-5015 3-Pin MIL-C-5015
    Electrical Connections (Pin A) Acceleration Output Acceleration Output
    Electrical Connections (Pin B) Ground Ground
    Electrical Connections (Pin C) Temperature Output Temperature Output
    Size - Height 1.86 in 47.2
    Weight 2.0 oz 56.7
Spectral Noise (100 Hz) (SI) 49.1 (µm/sec2)/√Hz
Temperature Range (English) -65 to +250 °F
Size - Hex (English) 11/16 in
Spectral Noise (10 Hz) (SI) 78.5 (µm/sec2)/√Hz
Resonant Frequency (English) 1500 kcpm
Housing Material Stainless Steel
Mounting Torque (SI) 2.7 to 6.8 Nm
Resonant Frequency (SI) 25 kHz
Size - Height (English) 1.65 in
Spectral Noise (1 kHz) (English) 4 µg/√Hz
Constant Current Excitation 2 to 20 mA
Size - Height (SI) 42.2 mm
Electrical Connection Position Top
Overload Limit (Shock) (English) 5000 g pk
Frequency Range (±3 dB) (SI) 0.5 to 10000 Hz
Broadband Resolution (1) (SI) 3434 µm/sec2
Output Bias Voltage 8 to 12 VDC
Mounting Thread (SI) No Metric Equivalent
Size - Hex (SI) 18 mm
Measurement Range (English) ±50 g
Enclosure Rating IP68
Sensitivity (±10 %) (SI) 10.2 mV/(m/s²)
Overload Limit (Shock) (SI) 49050 m/s² pk
Sealing Welded Hermetic
Electrical Isolation (Case) >100000000 Ohm
Output Impedance <150 Ohm
Frequency Range (±3 dB) (English) 30 to 600000 cpm
Sensing Element Ceramic
Temperature Range (SI) -54 to +121 °C
Non-Linearity ±1 %
Excitation Voltage 18 to 28 VDC
Sensing Geometry Shear
Settling Time (within 1% of bias) ≤2.0 sec
Weight (SI) 51 gm
Weight (English) 1.8 oz
Transverse Sensitivity ≤7 %
Spectral Noise (100 Hz) (English) 5 µg/√Hz
Sensitivity (±10 %) (English) 100 mV/g
Mounting Thread (English) 1/4-28 Female
Measurement Range (SI) ±490 m/s²
Mounting Torque (English) 2 to 5 ft-lb
Broadband Resolution (1) (English) 350 µg
Spectral Noise (1 kHz) (SI) 39.2 (µm/sec2)/√Hz
Discharge Time Constant ≥0.3 sec
Spectral Noise (10 Hz) (English) 8 µg/√Hz
Electrical Connector 2-Pin MIL-C-5015
Customers Also Bought

Platinum Stock Products; General purpose, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.5 to 10k Hz, top exit, 2-pin connector, single point ISO 17025 accredited calibration

OVERVIEW
SPECIFICATIONS
DOWNLOADS
JMG No: 1090411
Part No: 603C01
Stock: Expecting Stock

Platinum Low-cost Industrial ICP® Accelerometer
Platinum Stock Products; General purpose, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.5 to 10k Hz, top exit, 2-pin connector, single point ISO 17025 accredited calibration
IMI guarantees this item can ship immediately else shipping is free.
 

Product Specifications
  ENGLISH SI  
Performance
    Sensitivity (±10 %) 100 mV/g 10.2 mV/(m/s²) [1] 
    Measurement Range ±50 g ±490 m/s²  
    Frequency Range (±3 dB) 30 to 600000 cpm 0.5 to 10000 Hz [4] 
    Resonant Frequency 1500 kcpm 25 kHz [2] 
    Broadband Resolution (1) 350 µg 3434 µm/sec2 [2] 
    Non-Linearity ±1 % ±1 % [3] 
    Transverse Sensitivity ≤7 % ≤7 %  
Environmental
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
    Temperature Range -65 to +250 °F -54 to +121 °C  
    Enclosure Rating IP68 IP68  
Electrical
    Settling Time (within 1% of bias) ≤2.0 sec ≤2.0 sec  
    Discharge Time Constant ≥0.3 sec ≥0.3 sec  
    Excitation Voltage 18 to 28 VDC 18 to 28 VDC  
    Constant Current Excitation 2 to 20 mA 2 to 20 mA  
    Output Impedance <150> <150>  
    Output Bias Voltage 8 to 12 VDC 8 to 12 VDC  
    Spectral Noise (10 Hz) 8 µg/√Hz 78.5 (µm/sec2)/√Hz [2] 
    Spectral Noise (100 Hz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [2] 
    Spectral Noise (1 kHz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [2] 
    Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
Physical
    Size - Hex 11/16 in 18 mm  
    Size - Height 1.65 in 42.2 mm  
    Weight 1.8 oz 51 gm  
    Mounting Thread 1/4-28 Female No Metric Equivalent [5] 
    Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm  
    Sensing Element Ceramic Ceramic  
    Sensing Geometry Shear Shear  
    Housing Material Stainless Steel Stainless Steel  
    Sealing Welded Hermetic Welded Hermetic  
    Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015  
    Electrical Connection Position Top Top  
 

All specifications are at room temperature unless otherwise specified.

 

CEceneleccsa_us

Product Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] The high frequency tolerance is accurate within ±10% of the specified frequency.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.

Accessories:
Supplied
081A40 Mounting Stud (1)
ICS-2 NIST-traceable single-axis single-point amplitude response calibration at 6000 cpm (100 Hz) (1)
Optional Versions:

(EX) Hazardous Area Approval- contact factory for specific approvals

  ENGLISH SI
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4 Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
    Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 1=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 1="">
    Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4 Ex ia IIC T4, AExia IIC, T4
    Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 3=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 3="">

(M) Metric Mount

  ENGLISH SI
 
Accessories:
     M081A61 Mounting Stud (1)

(TO) Temperature Output

  ENGLISH SI
    Temperature Output Range +36 to +250 °F +2 to +121 °C
    Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
    Electrical Connector 3-Pin MIL-C-5015 3-Pin MIL-C-5015
    Electrical Connections (Pin A) Acceleration Output Acceleration Output
    Electrical Connections (Pin B) Ground Ground
    Electrical Connections (Pin C) Temperature Output Temperature Output
    Size - Height 1.86 in 47.2
    Weight 2.0 oz 56.7
Spectral Noise (100 Hz) (SI) 49.1 (µm/sec2)/√Hz
Temperature Range (English) -65 to +250 °F
Size - Hex (English) 11/16 in
Spectral Noise (10 Hz) (SI) 78.5 (µm/sec2)/√Hz
Resonant Frequency (English) 1500 kcpm
Housing Material Stainless Steel
Mounting Torque (SI) 2.7 to 6.8 Nm
Resonant Frequency (SI) 25 kHz
Size - Height (English) 1.65 in
Spectral Noise (1 kHz) (English) 4 µg/√Hz
Constant Current Excitation 2 to 20 mA
Size - Height (SI) 42.2 mm
Electrical Connection Position Top
Overload Limit (Shock) (English) 5000 g pk
Frequency Range (±3 dB) (SI) 0.5 to 10000 Hz
Broadband Resolution (1) (SI) 3434 µm/sec2
Output Bias Voltage 8 to 12 VDC
Mounting Thread (SI) No Metric Equivalent
Size - Hex (SI) 18 mm
Measurement Range (English) ±50 g
Enclosure Rating IP68
Sensitivity (±10 %) (SI) 10.2 mV/(m/s²)
Overload Limit (Shock) (SI) 49050 m/s² pk
Sealing Welded Hermetic
Electrical Isolation (Case) >100000000 Ohm
Output Impedance <150 Ohm
Frequency Range (±3 dB) (English) 30 to 600000 cpm
Sensing Element Ceramic
Temperature Range (SI) -54 to +121 °C
Non-Linearity ±1 %
Excitation Voltage 18 to 28 VDC
Sensing Geometry Shear
Settling Time (within 1% of bias) ≤2.0 sec
Weight (SI) 51 gm
Weight (English) 1.8 oz
Transverse Sensitivity ≤7 %
Spectral Noise (100 Hz) (English) 5 µg/√Hz
Sensitivity (±10 %) (English) 100 mV/g
Mounting Thread (English) 1/4-28 Female
Measurement Range (SI) ±490 m/s²
Mounting Torque (English) 2 to 5 ft-lb
Broadband Resolution (1) (English) 350 µg
Spectral Noise (1 kHz) (SI) 39.2 (µm/sec2)/√Hz
Discharge Time Constant ≥0.3 sec
Spectral Noise (10 Hz) (English) 8 µg/√Hz
Electrical Connector 2-Pin MIL-C-5015
OVERVIEW
SPECIFICATIONS
DOWNLOADS
JMG No: 1090411
Part No: 603C01
Stock: Expecting Stock

Platinum Low-cost Industrial ICP® Accelerometer
Platinum Stock Products; General purpose, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.5 to 10k Hz, top exit, 2-pin connector, single point ISO 17025 accredited calibration
IMI guarantees this item can ship immediately else shipping is free.
 

Product Specifications
  ENGLISH SI  
Performance
    Sensitivity (±10 %) 100 mV/g 10.2 mV/(m/s²) [1] 
    Measurement Range ±50 g ±490 m/s²  
    Frequency Range (±3 dB) 30 to 600000 cpm 0.5 to 10000 Hz [4] 
    Resonant Frequency 1500 kcpm 25 kHz [2] 
    Broadband Resolution (1) 350 µg 3434 µm/sec2 [2] 
    Non-Linearity ±1 % ±1 % [3] 
    Transverse Sensitivity ≤7 % ≤7 %  
Environmental
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
    Temperature Range -65 to +250 °F -54 to +121 °C  
    Enclosure Rating IP68 IP68  
Electrical
    Settling Time (within 1% of bias) ≤2.0 sec ≤2.0 sec  
    Discharge Time Constant ≥0.3 sec ≥0.3 sec  
    Excitation Voltage 18 to 28 VDC 18 to 28 VDC  
    Constant Current Excitation 2 to 20 mA 2 to 20 mA  
    Output Impedance <150> <150>  
    Output Bias Voltage 8 to 12 VDC 8 to 12 VDC  
    Spectral Noise (10 Hz) 8 µg/√Hz 78.5 (µm/sec2)/√Hz [2] 
    Spectral Noise (100 Hz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [2] 
    Spectral Noise (1 kHz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [2] 
    Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
Physical
    Size - Hex 11/16 in 18 mm  
    Size - Height 1.65 in 42.2 mm  
    Weight 1.8 oz 51 gm  
    Mounting Thread 1/4-28 Female No Metric Equivalent [5] 
    Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm  
    Sensing Element Ceramic Ceramic  
    Sensing Geometry Shear Shear  
    Housing Material Stainless Steel Stainless Steel  
    Sealing Welded Hermetic Welded Hermetic  
    Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015  
    Electrical Connection Position Top Top  
 

All specifications are at room temperature unless otherwise specified.

 

CEceneleccsa_us

Product Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] The high frequency tolerance is accurate within ±10% of the specified frequency.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.

Accessories:
Supplied
081A40 Mounting Stud (1)
ICS-2 NIST-traceable single-axis single-point amplitude response calibration at 6000 cpm (100 Hz) (1)
Optional Versions:

(EX) Hazardous Area Approval- contact factory for specific approvals

  ENGLISH SI
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4 Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
    Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 1=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 1="">
    Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4 Ex ia IIC T4, AExia IIC, T4
    Hazardous Area Approval EEx nL IIC T4, -40°C<><=121â°c, ii="" 3=""> EEx nL IIC T4, -40°C<><=121â°c, ii="" 3="">

(M) Metric Mount

  ENGLISH SI
 
Accessories:
     M081A61 Mounting Stud (1)

(TO) Temperature Output

  ENGLISH SI
    Temperature Output Range +36 to +250 °F +2 to +121 °C
    Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
    Electrical Connector 3-Pin MIL-C-5015 3-Pin MIL-C-5015
    Electrical Connections (Pin A) Acceleration Output Acceleration Output
    Electrical Connections (Pin B) Ground Ground
    Electrical Connections (Pin C) Temperature Output Temperature Output
    Size - Height 1.86 in 47.2
    Weight 2.0 oz 56.7
Spectral Noise (100 Hz) (SI) 49.1 (µm/sec2)/√Hz
Temperature Range (English) -65 to +250 °F
Size - Hex (English) 11/16 in
Spectral Noise (10 Hz) (SI) 78.5 (µm/sec2)/√Hz
Resonant Frequency (English) 1500 kcpm
Housing Material Stainless Steel
Mounting Torque (SI) 2.7 to 6.8 Nm
Resonant Frequency (SI) 25 kHz
Size - Height (English) 1.65 in
Spectral Noise (1 kHz) (English) 4 µg/√Hz
Constant Current Excitation 2 to 20 mA
Size - Height (SI) 42.2 mm
Electrical Connection Position Top
Overload Limit (Shock) (English) 5000 g pk
Frequency Range (±3 dB) (SI) 0.5 to 10000 Hz
Broadband Resolution (1) (SI) 3434 µm/sec2
Output Bias Voltage 8 to 12 VDC
Mounting Thread (SI) No Metric Equivalent
Size - Hex (SI) 18 mm
Measurement Range (English) ±50 g
Enclosure Rating IP68
Sensitivity (±10 %) (SI) 10.2 mV/(m/s²)
Overload Limit (Shock) (SI) 49050 m/s² pk
Sealing Welded Hermetic
Electrical Isolation (Case) >100000000 Ohm
Output Impedance <150 Ohm
Frequency Range (±3 dB) (English) 30 to 600000 cpm
Sensing Element Ceramic
Temperature Range (SI) -54 to +121 °C
Non-Linearity ±1 %
Excitation Voltage 18 to 28 VDC
Sensing Geometry Shear
Settling Time (within 1% of bias) ≤2.0 sec
Weight (SI) 51 gm
Weight (English) 1.8 oz
Transverse Sensitivity ≤7 %
Spectral Noise (100 Hz) (English) 5 µg/√Hz
Sensitivity (±10 %) (English) 100 mV/g
Mounting Thread (English) 1/4-28 Female
Measurement Range (SI) ±490 m/s²
Mounting Torque (English) 2 to 5 ft-lb
Broadband Resolution (1) (English) 350 µg
Spectral Noise (1 kHz) (SI) 39.2 (µm/sec2)/√Hz
Discharge Time Constant ≥0.3 sec
Spectral Noise (10 Hz) (English) 8 µg/√Hz
Electrical Connector 2-Pin MIL-C-5015
$196 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
Customers Also Bought