$1217 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
OVERVIEW
SPECIFICATIONS
JMG No: 1070169
Part No: 3741B122G
Type: Instrument
Availability: 3-4 weeks
DC Response Accelerometer
Differential MEMS DC accelerometer, 1000 mV/g, 2 g, 0 to 250 Hz, through hole mounting, 10 ft integral cable


Product Specifications
 ENGLISHSI 
Performance
    Sensitivity (±5 %)1000 mV/g101.9 mV/(m/s²)[1] 
    Measurement Range±2 g pk±19.6 m/s² pk 
    Frequency Range (±5 %)0 to 250 Hz0 to 250 Hz 
    Frequency Range (±10 )0 to 350 Hz0 to 350 Hz 
    Resonant Frequency≥1300 Hz≥1300 Hz 
    Phase Response (10 Hz)<2.5><2.5> 
    Broadband Resolution (0.5)0.25 mg rms.0025 m/s² rms[3] 
    Non-Linearity≤1 % FS≤1 % FS[2] 
    Transverse Sensitivity≤3 %≤3 % 
Environmental
    Overload Limit (Shock)±3000 g pk±29420 m/s² pk 
    Temperature Range (Operating)-65 to 250 °F-54.0 to 121 °C 
    Temperature Range (Storage)-65 to 250 °F-54.0 to 121 °C 
    Zero g Offset Temperature Coefficient±2.0 % FSO±2.0 % FSO[4][5] 
    Base Strain Sensitivity.0001 g/µε.001 (m/s²)/µε[3] 
Electrical
    Excitation Voltage6 to 30 VDC6 to 30 VDC 
    Current Consumption≤6 mA≤6 mA 
    Output Impedance≤100 Ohm≤100 Ohm 
    Offset Voltage±40 mVDC±40 mVDC[6] 
    Common Mode Voltage (±0.1 VDC)+2.5 VDC+2.5 VDC 
    Spectral Noise (1)22.9 µg/√Hz225 (µm/sec2)/√Hz[3] 
    Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm[7] 
Physical
    Housing MaterialAnodized AluminumAnodized Aluminum 
    SealingEpoxyEpoxy 
    Size - Height0.30 in7.62 mm 
    Size - Length1.00 in25.4 mm 
    Size - Width.85 in21.6 mm 
    Weight (without cable)0.35 oz9.92 gm[3] 
    Electrical ConnectorIntegral CableIntegral Cable 
    Electrical Connection PositionSideSide 
    Cable TerminationPigtail EndsPigtail Ends 
    Cable Type010 4-cond Shielded010 4-cond Shielded 
    Cable Length10 ft3 m 
    MountingThrough Holes (2)Through Holes (2) 

All specifications are at room temperature unless otherwise specified.

CE
Product Notes
[1] Measured at 5 Hz, 0.5 grms.
[2] Zero-based, least-squares, straight line method.
[3] Typical.
[4] FSO = Full Scale Output over the Measurement Range (4VDC).
[5] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[6] Offset tolerance is based on manufacturers supplied cable length.
[7] Case and shield to mounting surface or cable leads.
[8] See PCB Declaration of Conformance PS027 for details.
Accessories:
Optional
080A208Triaxial mounting block(1)
Supplied
081A103Mounting screw(2)
ACS-85(1)
M081A103Mounting screw and washer, M3 x 0.5 thread(2)
Optional Versions:
No optional versions
Zero g Offset Temperature Coefficient ±2.0 % FSO
Resonant Frequency ≥1300 Hz
Common Mode Voltage (±0.1 VDC) +2.5 VDC
Broadband Resolution (0.5) (SI) .0025 m/s² rms
Frequency Range (±5 %) 0 to 250 Hz
Frequency Range (±10 ) 0 to 350 Hz
Housing Material Anodized Aluminum
Temperature Range (Storage) (SI) -54.0 to 121 °C
Size - Height (English) 0.30 in
Cable Length (English) 10 ft
Size - Height (SI) 7.62 mm
Size - Length (English) 1.00 in
Electrical Connection Position Side
Overload Limit (Shock) (English) ±3000 g pk
Spectral Noise (1) (English) 22.9 µg/√Hz
Size - Width (English) .85 in
Measurement Range (English) ±2 g pk
Overload Limit (Shock) (SI) ±29420 m/s² pk
Sealing Epoxy
Electrical Isolation (Case) >100000000 Ohm
Output Impedance ≤100 Ohm
Sensitivity (±5 %) (English) 1000 mV/g
Cable Termination Pigtail Ends
Cable Length (SI) 3 m
Weight (without cable) (English) 0.35 oz
Non-Linearity ≤1 % FS
Excitation Voltage 6 to 30 VDC
Broadband Resolution (0.5) (English) 0.25 mg rms
Cable Type 010 4-cond Shielded
Phase Response (10 Hz) <2.5 °
Temperature Range (Operating) (SI) -54.0 to 121 °C
Sensitivity (±5 %) (SI) 101.9 mV/(m/s²)
Offset Voltage ±40 mVDC
Temperature Range (Operating) (English) -65 to 250 °F
Spectral Noise (1) (SI) 225 (µm/sec2)/√Hz
Current Consumption ≤6 mA
Base Strain Sensitivity (SI) .001 (m/s²)/µε
Transverse Sensitivity ≤3 %
Measurement Range (SI) ±19.6 m/s² pk
Base Strain Sensitivity (English) .0001 g/µε
Size - Length (SI) 25.4 mm
Temperature Range (Storage) (English) -65 to 250 °F
Size - Width (SI) 21.6 mm
Mounting Through Holes (2)
Weight (without cable) (SI) 9.92 gm
Electrical Connector Integral Cable
    OVERVIEW
    SPECIFICATIONS
    JMG No: 1070169
    Part No: 3741B122G
    Type: Instrument
    Availability: 3-4 weeks
    DC Response Accelerometer
    Differential MEMS DC accelerometer, 1000 mV/g, 2 g, 0 to 250 Hz, through hole mounting, 10 ft integral cable


    Product Specifications
     ENGLISHSI 
    Performance
        Sensitivity (±5 %)1000 mV/g101.9 mV/(m/s²)[1] 
        Measurement Range±2 g pk±19.6 m/s² pk 
        Frequency Range (±5 %)0 to 250 Hz0 to 250 Hz 
        Frequency Range (±10 )0 to 350 Hz0 to 350 Hz 
        Resonant Frequency≥1300 Hz≥1300 Hz 
        Phase Response (10 Hz)<2.5><2.5> 
        Broadband Resolution (0.5)0.25 mg rms.0025 m/s² rms[3] 
        Non-Linearity≤1 % FS≤1 % FS[2] 
        Transverse Sensitivity≤3 %≤3 % 
    Environmental
        Overload Limit (Shock)±3000 g pk±29420 m/s² pk 
        Temperature Range (Operating)-65 to 250 °F-54.0 to 121 °C 
        Temperature Range (Storage)-65 to 250 °F-54.0 to 121 °C 
        Zero g Offset Temperature Coefficient±2.0 % FSO±2.0 % FSO[4][5] 
        Base Strain Sensitivity.0001 g/µε.001 (m/s²)/µε[3] 
    Electrical
        Excitation Voltage6 to 30 VDC6 to 30 VDC 
        Current Consumption≤6 mA≤6 mA 
        Output Impedance≤100 Ohm≤100 Ohm 
        Offset Voltage±40 mVDC±40 mVDC[6] 
        Common Mode Voltage (±0.1 VDC)+2.5 VDC+2.5 VDC 
        Spectral Noise (1)22.9 µg/√Hz225 (µm/sec2)/√Hz[3] 
        Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm[7] 
    Physical
        Housing MaterialAnodized AluminumAnodized Aluminum 
        SealingEpoxyEpoxy 
        Size - Height0.30 in7.62 mm 
        Size - Length1.00 in25.4 mm 
        Size - Width.85 in21.6 mm 
        Weight (without cable)0.35 oz9.92 gm[3] 
        Electrical ConnectorIntegral CableIntegral Cable 
        Electrical Connection PositionSideSide 
        Cable TerminationPigtail EndsPigtail Ends 
        Cable Type010 4-cond Shielded010 4-cond Shielded 
        Cable Length10 ft3 m 
        MountingThrough Holes (2)Through Holes (2) 

    All specifications are at room temperature unless otherwise specified.

    CE
    Product Notes
    [1] Measured at 5 Hz, 0.5 grms.
    [2] Zero-based, least-squares, straight line method.
    [3] Typical.
    [4] FSO = Full Scale Output over the Measurement Range (4VDC).
    [5] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
    [6] Offset tolerance is based on manufacturers supplied cable length.
    [7] Case and shield to mounting surface or cable leads.
    [8] See PCB Declaration of Conformance PS027 for details.
    Accessories:
    Optional
    080A208Triaxial mounting block(1)
    Supplied
    081A103Mounting screw(2)
    ACS-85(1)
    M081A103Mounting screw and washer, M3 x 0.5 thread(2)
    Optional Versions:
    No optional versions
    Zero g Offset Temperature Coefficient ±2.0 % FSO
    Resonant Frequency ≥1300 Hz
    Common Mode Voltage (±0.1 VDC) +2.5 VDC
    Broadband Resolution (0.5) (SI) .0025 m/s² rms
    Frequency Range (±5 %) 0 to 250 Hz
    Frequency Range (±10 ) 0 to 350 Hz
    Housing Material Anodized Aluminum
    Temperature Range (Storage) (SI) -54.0 to 121 °C
    Size - Height (English) 0.30 in
    Cable Length (English) 10 ft
    Size - Height (SI) 7.62 mm
    Size - Length (English) 1.00 in
    Electrical Connection Position Side
    Overload Limit (Shock) (English) ±3000 g pk
    Spectral Noise (1) (English) 22.9 µg/√Hz
    Size - Width (English) .85 in
    Measurement Range (English) ±2 g pk
    Overload Limit (Shock) (SI) ±29420 m/s² pk
    Sealing Epoxy
    Electrical Isolation (Case) >100000000 Ohm
    Output Impedance ≤100 Ohm
    Sensitivity (±5 %) (English) 1000 mV/g
    Cable Termination Pigtail Ends
    Cable Length (SI) 3 m
    Weight (without cable) (English) 0.35 oz
    Non-Linearity ≤1 % FS
    Excitation Voltage 6 to 30 VDC
    Broadband Resolution (0.5) (English) 0.25 mg rms
    Cable Type 010 4-cond Shielded
    Phase Response (10 Hz) <2.5 °
    Temperature Range (Operating) (SI) -54.0 to 121 °C
    Sensitivity (±5 %) (SI) 101.9 mV/(m/s²)
    Offset Voltage ±40 mVDC
    Temperature Range (Operating) (English) -65 to 250 °F
    Spectral Noise (1) (SI) 225 (µm/sec2)/√Hz
    Current Consumption ≤6 mA
    Base Strain Sensitivity (SI) .001 (m/s²)/µε
    Transverse Sensitivity ≤3 %
    Measurement Range (SI) ±19.6 m/s² pk
    Base Strain Sensitivity (English) .0001 g/µε
    Size - Length (SI) 25.4 mm
    Temperature Range (Storage) (English) -65 to 250 °F
    Size - Width (SI) 21.6 mm
    Mounting Through Holes (2)
    Weight (without cable) (SI) 9.92 gm
    Electrical Connector Integral Cable

      Differential MEMS DC accelerometer, 1000 mV/g, 2 g, 0 to 250 Hz, through hole mounting, 10 ft integral cable

      OVERVIEW
      SPECIFICATIONS
      JMG No: 1070169
      Part No: 3741B122G
      Type: Instrument
      Availability: 3-4 weeks
      DC Response Accelerometer
      Differential MEMS DC accelerometer, 1000 mV/g, 2 g, 0 to 250 Hz, through hole mounting, 10 ft integral cable


      Product Specifications
       ENGLISHSI 
      Performance
          Sensitivity (±5 %)1000 mV/g101.9 mV/(m/s²)[1] 
          Measurement Range±2 g pk±19.6 m/s² pk 
          Frequency Range (±5 %)0 to 250 Hz0 to 250 Hz 
          Frequency Range (±10 )0 to 350 Hz0 to 350 Hz 
          Resonant Frequency≥1300 Hz≥1300 Hz 
          Phase Response (10 Hz)<2.5><2.5> 
          Broadband Resolution (0.5)0.25 mg rms.0025 m/s² rms[3] 
          Non-Linearity≤1 % FS≤1 % FS[2] 
          Transverse Sensitivity≤3 %≤3 % 
      Environmental
          Overload Limit (Shock)±3000 g pk±29420 m/s² pk 
          Temperature Range (Operating)-65 to 250 °F-54.0 to 121 °C 
          Temperature Range (Storage)-65 to 250 °F-54.0 to 121 °C 
          Zero g Offset Temperature Coefficient±2.0 % FSO±2.0 % FSO[4][5] 
          Base Strain Sensitivity.0001 g/µε.001 (m/s²)/µε[3] 
      Electrical
          Excitation Voltage6 to 30 VDC6 to 30 VDC 
          Current Consumption≤6 mA≤6 mA 
          Output Impedance≤100 Ohm≤100 Ohm 
          Offset Voltage±40 mVDC±40 mVDC[6] 
          Common Mode Voltage (±0.1 VDC)+2.5 VDC+2.5 VDC 
          Spectral Noise (1)22.9 µg/√Hz225 (µm/sec2)/√Hz[3] 
          Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm[7] 
      Physical
          Housing MaterialAnodized AluminumAnodized Aluminum 
          SealingEpoxyEpoxy 
          Size - Height0.30 in7.62 mm 
          Size - Length1.00 in25.4 mm 
          Size - Width.85 in21.6 mm 
          Weight (without cable)0.35 oz9.92 gm[3] 
          Electrical ConnectorIntegral CableIntegral Cable 
          Electrical Connection PositionSideSide 
          Cable TerminationPigtail EndsPigtail Ends 
          Cable Type010 4-cond Shielded010 4-cond Shielded 
          Cable Length10 ft3 m 
          MountingThrough Holes (2)Through Holes (2) 

      All specifications are at room temperature unless otherwise specified.

      CE
      Product Notes
      [1] Measured at 5 Hz, 0.5 grms.
      [2] Zero-based, least-squares, straight line method.
      [3] Typical.
      [4] FSO = Full Scale Output over the Measurement Range (4VDC).
      [5] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
      [6] Offset tolerance is based on manufacturers supplied cable length.
      [7] Case and shield to mounting surface or cable leads.
      [8] See PCB Declaration of Conformance PS027 for details.
      Accessories:
      Optional
      080A208Triaxial mounting block(1)
      Supplied
      081A103Mounting screw(2)
      ACS-85(1)
      M081A103Mounting screw and washer, M3 x 0.5 thread(2)
      Optional Versions:
      No optional versions
      Zero g Offset Temperature Coefficient ±2.0 % FSO
      Resonant Frequency ≥1300 Hz
      Common Mode Voltage (±0.1 VDC) +2.5 VDC
      Broadband Resolution (0.5) (SI) .0025 m/s² rms
      Frequency Range (±5 %) 0 to 250 Hz
      Frequency Range (±10 ) 0 to 350 Hz
      Housing Material Anodized Aluminum
      Temperature Range (Storage) (SI) -54.0 to 121 °C
      Size - Height (English) 0.30 in
      Cable Length (English) 10 ft
      Size - Height (SI) 7.62 mm
      Size - Length (English) 1.00 in
      Electrical Connection Position Side
      Overload Limit (Shock) (English) ±3000 g pk
      Spectral Noise (1) (English) 22.9 µg/√Hz
      Size - Width (English) .85 in
      Measurement Range (English) ±2 g pk
      Overload Limit (Shock) (SI) ±29420 m/s² pk
      Sealing Epoxy
      Electrical Isolation (Case) >100000000 Ohm
      Output Impedance ≤100 Ohm
      Sensitivity (±5 %) (English) 1000 mV/g
      Cable Termination Pigtail Ends
      Cable Length (SI) 3 m
      Weight (without cable) (English) 0.35 oz
      Non-Linearity ≤1 % FS
      Excitation Voltage 6 to 30 VDC
      Broadband Resolution (0.5) (English) 0.25 mg rms
      Cable Type 010 4-cond Shielded
      Phase Response (10 Hz) <2.5 °
      Temperature Range (Operating) (SI) -54.0 to 121 °C
      Sensitivity (±5 %) (SI) 101.9 mV/(m/s²)
      Offset Voltage ±40 mVDC
      Temperature Range (Operating) (English) -65 to 250 °F
      Spectral Noise (1) (SI) 225 (µm/sec2)/√Hz
      Current Consumption ≤6 mA
      Base Strain Sensitivity (SI) .001 (m/s²)/µε
      Transverse Sensitivity ≤3 %
      Measurement Range (SI) ±19.6 m/s² pk
      Base Strain Sensitivity (English) .0001 g/µε
      Size - Length (SI) 25.4 mm
      Temperature Range (Storage) (English) -65 to 250 °F
      Size - Width (SI) 21.6 mm
      Mounting Through Holes (2)
      Weight (without cable) (SI) 9.92 gm
      Electrical Connector Integral Cable
        OVERVIEW
        SPECIFICATIONS
        JMG No: 1070169
        Part No: 3741B122G
        Type: Instrument
        Availability: 3-4 weeks
        DC Response Accelerometer
        Differential MEMS DC accelerometer, 1000 mV/g, 2 g, 0 to 250 Hz, through hole mounting, 10 ft integral cable


        Product Specifications
         ENGLISHSI 
        Performance
            Sensitivity (±5 %)1000 mV/g101.9 mV/(m/s²)[1] 
            Measurement Range±2 g pk±19.6 m/s² pk 
            Frequency Range (±5 %)0 to 250 Hz0 to 250 Hz 
            Frequency Range (±10 )0 to 350 Hz0 to 350 Hz 
            Resonant Frequency≥1300 Hz≥1300 Hz 
            Phase Response (10 Hz)<2.5><2.5> 
            Broadband Resolution (0.5)0.25 mg rms.0025 m/s² rms[3] 
            Non-Linearity≤1 % FS≤1 % FS[2] 
            Transverse Sensitivity≤3 %≤3 % 
        Environmental
            Overload Limit (Shock)±3000 g pk±29420 m/s² pk 
            Temperature Range (Operating)-65 to 250 °F-54.0 to 121 °C 
            Temperature Range (Storage)-65 to 250 °F-54.0 to 121 °C 
            Zero g Offset Temperature Coefficient±2.0 % FSO±2.0 % FSO[4][5] 
            Base Strain Sensitivity.0001 g/µε.001 (m/s²)/µε[3] 
        Electrical
            Excitation Voltage6 to 30 VDC6 to 30 VDC 
            Current Consumption≤6 mA≤6 mA 
            Output Impedance≤100 Ohm≤100 Ohm 
            Offset Voltage±40 mVDC±40 mVDC[6] 
            Common Mode Voltage (±0.1 VDC)+2.5 VDC+2.5 VDC 
            Spectral Noise (1)22.9 µg/√Hz225 (µm/sec2)/√Hz[3] 
            Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm[7] 
        Physical
            Housing MaterialAnodized AluminumAnodized Aluminum 
            SealingEpoxyEpoxy 
            Size - Height0.30 in7.62 mm 
            Size - Length1.00 in25.4 mm 
            Size - Width.85 in21.6 mm 
            Weight (without cable)0.35 oz9.92 gm[3] 
            Electrical ConnectorIntegral CableIntegral Cable 
            Electrical Connection PositionSideSide 
            Cable TerminationPigtail EndsPigtail Ends 
            Cable Type010 4-cond Shielded010 4-cond Shielded 
            Cable Length10 ft3 m 
            MountingThrough Holes (2)Through Holes (2) 

        All specifications are at room temperature unless otherwise specified.

        CE
        Product Notes
        [1] Measured at 5 Hz, 0.5 grms.
        [2] Zero-based, least-squares, straight line method.
        [3] Typical.
        [4] FSO = Full Scale Output over the Measurement Range (4VDC).
        [5] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
        [6] Offset tolerance is based on manufacturers supplied cable length.
        [7] Case and shield to mounting surface or cable leads.
        [8] See PCB Declaration of Conformance PS027 for details.
        Accessories:
        Optional
        080A208Triaxial mounting block(1)
        Supplied
        081A103Mounting screw(2)
        ACS-85(1)
        M081A103Mounting screw and washer, M3 x 0.5 thread(2)
        Optional Versions:
        No optional versions
        Zero g Offset Temperature Coefficient ±2.0 % FSO
        Resonant Frequency ≥1300 Hz
        Common Mode Voltage (±0.1 VDC) +2.5 VDC
        Broadband Resolution (0.5) (SI) .0025 m/s² rms
        Frequency Range (±5 %) 0 to 250 Hz
        Frequency Range (±10 ) 0 to 350 Hz
        Housing Material Anodized Aluminum
        Temperature Range (Storage) (SI) -54.0 to 121 °C
        Size - Height (English) 0.30 in
        Cable Length (English) 10 ft
        Size - Height (SI) 7.62 mm
        Size - Length (English) 1.00 in
        Electrical Connection Position Side
        Overload Limit (Shock) (English) ±3000 g pk
        Spectral Noise (1) (English) 22.9 µg/√Hz
        Size - Width (English) .85 in
        Measurement Range (English) ±2 g pk
        Overload Limit (Shock) (SI) ±29420 m/s² pk
        Sealing Epoxy
        Electrical Isolation (Case) >100000000 Ohm
        Output Impedance ≤100 Ohm
        Sensitivity (±5 %) (English) 1000 mV/g
        Cable Termination Pigtail Ends
        Cable Length (SI) 3 m
        Weight (without cable) (English) 0.35 oz
        Non-Linearity ≤1 % FS
        Excitation Voltage 6 to 30 VDC
        Broadband Resolution (0.5) (English) 0.25 mg rms
        Cable Type 010 4-cond Shielded
        Phase Response (10 Hz) <2.5 °
        Temperature Range (Operating) (SI) -54.0 to 121 °C
        Sensitivity (±5 %) (SI) 101.9 mV/(m/s²)
        Offset Voltage ±40 mVDC
        Temperature Range (Operating) (English) -65 to 250 °F
        Spectral Noise (1) (SI) 225 (µm/sec2)/√Hz
        Current Consumption ≤6 mA
        Base Strain Sensitivity (SI) .001 (m/s²)/µε
        Transverse Sensitivity ≤3 %
        Measurement Range (SI) ±19.6 m/s² pk
        Base Strain Sensitivity (English) .0001 g/µε
        Size - Length (SI) 25.4 mm
        Temperature Range (Storage) (English) -65 to 250 °F
        Size - Width (SI) 21.6 mm
        Mounting Through Holes (2)
        Weight (without cable) (SI) 9.92 gm
        Electrical Connector Integral Cable
          $1217 AUD (Ex. GST)
          Qty:
          Enquiry sent successfully
          Product Enquiry