$85 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Cole-Parmer
JMG No: 1054062
Part No: 30600-02
UNSPSC: 41121815
Type: Instrument
Availability: Within 12 days
  • 3-way stopcock/flow diverter with male luer lock connections
  • Pack of 10

Choose stopcocks with either a male luer lock or a male luer slip. Handle rotates 90deg on one-way stopcocks, 180deg on three-way stopcocks, and 360deg on four-way stopcocks. All have PC body and HDPE stem.

Description Stopcocks with Luer Connections; 3-way; male lock, Non-sterile
Flow pattern Three-Way
Inlet Port Female Luer
Wetted Materials Polycarbonate
Outlet port Male Luer Lock
Are the stopcocks small enough to work with 1/16" or 1/32" tubing?
Answer
Yes, there are luer adapters that have male or female luers on one side, and 1/16" or larger barbed fittings on the other. Please see our luer selection for the various sizes and materials we offer.Answered on 4/8/2011 by Mike from Tech Support
Can this valve withstand ethanol at cryogenic (-70 to -80 degrees Celsius) temperatures?
Answer
This product has not been tested at this low of a temperature range. Chemically, it will withstand ethyl alcohol.Answered on 5/19/2011 by Jack from Technical Support
How good is the polycarbonate material in resistance to concentrated alkaline solvents and DCM
Answer
It would really depend on the specific chemical and concentration, not the family it belongs to. Sodium hydroxide should only be used with this material in concentrations less than 20%. I do not have chemical compatibility data for dichloromethane with any materials. It may be something you test to assure the part is appropriate for your needs.Answered on 2/1/2012 by Jen from Technical Support
How this product can be sterilized? Your best suggestion please for cell culture uses.
Answer
We suggest gamma irradiation.Answered on 8/18/2011 by Jen from Technical Support
What is the internal and external diameter of the three openings?
Answer
Key features of Luer Taper connections are defined in the ISO 594 standards. It is also defined in the DIN and EN standard 1707:1996 and 20594-1:1993.Luer connections should be used in conjunction with adapters if needed to connect to other tubing. The smallest internal bore for this unit is 0.078" in diameter.Answered on 8/30/2012 by Jen from Technical Support
what is the internal diameter?
Answer
The the smallest point, the internal diameter is 0.078 inches (about 2 mm).Answered on 9/20/2011 by Jen from Technical Support
What is the pressure rating for this product?
Answer
These stopcocks are not intended for use in a pressurized system or in a vacuum. There are no ratings for either system. Generally, fittings for high pressures should be rated as such. For example, 30526-34 is rated to 1050 PSI.Answered on 5/21/2013 by Dan from Technical Support
What's the size of the matching tubings?
Answer
This product has connections known as luer fittings. They're tapered fittings that can be found on syringe products as well. To attach a length of tubing, some luer adapter fittings will be needed. Please contact our technical application specialists for additional assistance (contact information can be found in the "contact us" section on the web page).Answered on 6/25/2013 by Jack from Technical Support
will this give me a t-shape or l-shape flow pattern or both?
Answer
This can give an "L" "T" or straight across ("I") pattern.Answered on 9/24/2012 by Jen from Technical Support
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Cole-Parmer
JMG No: 1054062
Part No: 30600-02
UNSPSC: 41121815
Type: Instrument
Availability: Within 12 days
  • 3-way stopcock/flow diverter with male luer lock connections
  • Pack of 10

Choose stopcocks with either a male luer lock or a male luer slip. Handle rotates 90deg on one-way stopcocks, 180deg on three-way stopcocks, and 360deg on four-way stopcocks. All have PC body and HDPE stem.

Description Stopcocks with Luer Connections; 3-way; male lock, Non-sterile
Flow pattern Three-Way
Inlet Port Female Luer
Wetted Materials Polycarbonate
Outlet port Male Luer Lock
Are the stopcocks small enough to work with 1/16" or 1/32" tubing?
Answer
Yes, there are luer adapters that have male or female luers on one side, and 1/16" or larger barbed fittings on the other. Please see our luer selection for the various sizes and materials we offer.Answered on 4/8/2011 by Mike from Tech Support
Can this valve withstand ethanol at cryogenic (-70 to -80 degrees Celsius) temperatures?
Answer
This product has not been tested at this low of a temperature range. Chemically, it will withstand ethyl alcohol.Answered on 5/19/2011 by Jack from Technical Support
How good is the polycarbonate material in resistance to concentrated alkaline solvents and DCM
Answer
It would really depend on the specific chemical and concentration, not the family it belongs to. Sodium hydroxide should only be used with this material in concentrations less than 20%. I do not have chemical compatibility data for dichloromethane with any materials. It may be something you test to assure the part is appropriate for your needs.Answered on 2/1/2012 by Jen from Technical Support
How this product can be sterilized? Your best suggestion please for cell culture uses.
Answer
We suggest gamma irradiation.Answered on 8/18/2011 by Jen from Technical Support
What is the internal and external diameter of the three openings?
Answer
Key features of Luer Taper connections are defined in the ISO 594 standards. It is also defined in the DIN and EN standard 1707:1996 and 20594-1:1993.Luer connections should be used in conjunction with adapters if needed to connect to other tubing. The smallest internal bore for this unit is 0.078" in diameter.Answered on 8/30/2012 by Jen from Technical Support
what is the internal diameter?
Answer
The the smallest point, the internal diameter is 0.078 inches (about 2 mm).Answered on 9/20/2011 by Jen from Technical Support
What is the pressure rating for this product?
Answer
These stopcocks are not intended for use in a pressurized system or in a vacuum. There are no ratings for either system. Generally, fittings for high pressures should be rated as such. For example, 30526-34 is rated to 1050 PSI.Answered on 5/21/2013 by Dan from Technical Support
What's the size of the matching tubings?
Answer
This product has connections known as luer fittings. They're tapered fittings that can be found on syringe products as well. To attach a length of tubing, some luer adapter fittings will be needed. Please contact our technical application specialists for additional assistance (contact information can be found in the "contact us" section on the web page).Answered on 6/25/2013 by Jack from Technical Support
will this give me a t-shape or l-shape flow pattern or both?
Answer
This can give an "L" "T" or straight across ("I") pattern.Answered on 9/24/2012 by Jen from Technical Support
Customers Also Bought

Cole-Parmer Stopcocks with Luer Connections, 3-way, Male Lock, Non-sterile; 10/Pk

OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Cole-Parmer
JMG No: 1054062
Part No: 30600-02
UNSPSC: 41121815
Type: Instrument
Availability: Within 12 days
  • 3-way stopcock/flow diverter with male luer lock connections
  • Pack of 10

Choose stopcocks with either a male luer lock or a male luer slip. Handle rotates 90deg on one-way stopcocks, 180deg on three-way stopcocks, and 360deg on four-way stopcocks. All have PC body and HDPE stem.

Description Stopcocks with Luer Connections; 3-way; male lock, Non-sterile
Flow pattern Three-Way
Inlet Port Female Luer
Wetted Materials Polycarbonate
Outlet port Male Luer Lock
Are the stopcocks small enough to work with 1/16" or 1/32" tubing?
Answer
Yes, there are luer adapters that have male or female luers on one side, and 1/16" or larger barbed fittings on the other. Please see our luer selection for the various sizes and materials we offer.Answered on 4/8/2011 by Mike from Tech Support
Can this valve withstand ethanol at cryogenic (-70 to -80 degrees Celsius) temperatures?
Answer
This product has not been tested at this low of a temperature range. Chemically, it will withstand ethyl alcohol.Answered on 5/19/2011 by Jack from Technical Support
How good is the polycarbonate material in resistance to concentrated alkaline solvents and DCM
Answer
It would really depend on the specific chemical and concentration, not the family it belongs to. Sodium hydroxide should only be used with this material in concentrations less than 20%. I do not have chemical compatibility data for dichloromethane with any materials. It may be something you test to assure the part is appropriate for your needs.Answered on 2/1/2012 by Jen from Technical Support
How this product can be sterilized? Your best suggestion please for cell culture uses.
Answer
We suggest gamma irradiation.Answered on 8/18/2011 by Jen from Technical Support
What is the internal and external diameter of the three openings?
Answer
Key features of Luer Taper connections are defined in the ISO 594 standards. It is also defined in the DIN and EN standard 1707:1996 and 20594-1:1993.Luer connections should be used in conjunction with adapters if needed to connect to other tubing. The smallest internal bore for this unit is 0.078" in diameter.Answered on 8/30/2012 by Jen from Technical Support
what is the internal diameter?
Answer
The the smallest point, the internal diameter is 0.078 inches (about 2 mm).Answered on 9/20/2011 by Jen from Technical Support
What is the pressure rating for this product?
Answer
These stopcocks are not intended for use in a pressurized system or in a vacuum. There are no ratings for either system. Generally, fittings for high pressures should be rated as such. For example, 30526-34 is rated to 1050 PSI.Answered on 5/21/2013 by Dan from Technical Support
What's the size of the matching tubings?
Answer
This product has connections known as luer fittings. They're tapered fittings that can be found on syringe products as well. To attach a length of tubing, some luer adapter fittings will be needed. Please contact our technical application specialists for additional assistance (contact information can be found in the "contact us" section on the web page).Answered on 6/25/2013 by Jack from Technical Support
will this give me a t-shape or l-shape flow pattern or both?
Answer
This can give an "L" "T" or straight across ("I") pattern.Answered on 9/24/2012 by Jen from Technical Support
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Cole-Parmer
JMG No: 1054062
Part No: 30600-02
UNSPSC: 41121815
Type: Instrument
Availability: Within 12 days
  • 3-way stopcock/flow diverter with male luer lock connections
  • Pack of 10

Choose stopcocks with either a male luer lock or a male luer slip. Handle rotates 90deg on one-way stopcocks, 180deg on three-way stopcocks, and 360deg on four-way stopcocks. All have PC body and HDPE stem.

Description Stopcocks with Luer Connections; 3-way; male lock, Non-sterile
Flow pattern Three-Way
Inlet Port Female Luer
Wetted Materials Polycarbonate
Outlet port Male Luer Lock
Are the stopcocks small enough to work with 1/16" or 1/32" tubing?
Answer
Yes, there are luer adapters that have male or female luers on one side, and 1/16" or larger barbed fittings on the other. Please see our luer selection for the various sizes and materials we offer.Answered on 4/8/2011 by Mike from Tech Support
Can this valve withstand ethanol at cryogenic (-70 to -80 degrees Celsius) temperatures?
Answer
This product has not been tested at this low of a temperature range. Chemically, it will withstand ethyl alcohol.Answered on 5/19/2011 by Jack from Technical Support
How good is the polycarbonate material in resistance to concentrated alkaline solvents and DCM
Answer
It would really depend on the specific chemical and concentration, not the family it belongs to. Sodium hydroxide should only be used with this material in concentrations less than 20%. I do not have chemical compatibility data for dichloromethane with any materials. It may be something you test to assure the part is appropriate for your needs.Answered on 2/1/2012 by Jen from Technical Support
How this product can be sterilized? Your best suggestion please for cell culture uses.
Answer
We suggest gamma irradiation.Answered on 8/18/2011 by Jen from Technical Support
What is the internal and external diameter of the three openings?
Answer
Key features of Luer Taper connections are defined in the ISO 594 standards. It is also defined in the DIN and EN standard 1707:1996 and 20594-1:1993.Luer connections should be used in conjunction with adapters if needed to connect to other tubing. The smallest internal bore for this unit is 0.078" in diameter.Answered on 8/30/2012 by Jen from Technical Support
what is the internal diameter?
Answer
The the smallest point, the internal diameter is 0.078 inches (about 2 mm).Answered on 9/20/2011 by Jen from Technical Support
What is the pressure rating for this product?
Answer
These stopcocks are not intended for use in a pressurized system or in a vacuum. There are no ratings for either system. Generally, fittings for high pressures should be rated as such. For example, 30526-34 is rated to 1050 PSI.Answered on 5/21/2013 by Dan from Technical Support
What's the size of the matching tubings?
Answer
This product has connections known as luer fittings. They're tapered fittings that can be found on syringe products as well. To attach a length of tubing, some luer adapter fittings will be needed. Please contact our technical application specialists for additional assistance (contact information can be found in the "contact us" section on the web page).Answered on 6/25/2013 by Jack from Technical Support
will this give me a t-shape or l-shape flow pattern or both?
Answer
This can give an "L" "T" or straight across ("I") pattern.Answered on 9/24/2012 by Jen from Technical Support
$85 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
Customers Also Bought