$94 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Cole-Parmer
JMG No: 1054060
Part No: 30600-00
UNSPSC: 41121815
Type: Instrument
Availability: Within 13 days
  • HDPE handle rotates 360 degrees.

Choose stopcocks with either a male luer lock or a male luer slip. Handle rotates 90deg on one-way stopcocks, 180deg on three-way stopcocks, and 360deg on four-way stopcocks. All have PC body and HDPE stem.

Connection Type-Port 1 Female luer
Connection Type-Port 2 Male luer lock
Material Polycarbonate
Number of Ports 2
Outlet port Male Luer Lock
Inlet Port Female Luer
Wetted Materials Polycarbonate
Flow pattern One-Way
Description Stopcock with Luer Connections; 1-way; male lock, Non-sterile
How can this be sterilised?
Answer
These can be gamma sterilized. These are not autoclavable.Answered on 3/23/2011 by Jen from Technical Support
is it screw thread interface?Can it match with the 60ml screw thread syringe?
Answer
Luer connections are standardized. Most syringes also have luer connections, regardless of the volume capacity, so the answer is most likely, yes this should connect directly.Answered on 6/4/2012 by Jen from Technical Support
is this product sterile?
Answer
No, this product is not sterile.Answered on 1/31/2011 by Jen from Technical Support
What are the dimensions for this? What size opening will it fit?
Answer
The bore is 0.115" through the stopcock. The total length is roughly 2 inches. These have standard male slip tip and female luer lock connections. Please contact our technical application specialists for additional assistance (contact information can be found in the "contact us" section on the web page).Answered on 6/23/2010 by Jen from Technical Support
what is the maximum pressure that the stopcock can resist?
Answer
ISO requires a 45 psi pressure and this unit will handle at least this amount. The unit may support higher pressures, but these units are not recommended for use above 45psi.Answered on 6/20/2012 by Jay from Customer Service
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Cole-Parmer
JMG No: 1054060
Part No: 30600-00
UNSPSC: 41121815
Type: Instrument
Availability: Within 13 days
  • HDPE handle rotates 360 degrees.

Choose stopcocks with either a male luer lock or a male luer slip. Handle rotates 90deg on one-way stopcocks, 180deg on three-way stopcocks, and 360deg on four-way stopcocks. All have PC body and HDPE stem.

Connection Type-Port 1 Female luer
Connection Type-Port 2 Male luer lock
Material Polycarbonate
Number of Ports 2
Outlet port Male Luer Lock
Inlet Port Female Luer
Wetted Materials Polycarbonate
Flow pattern One-Way
Description Stopcock with Luer Connections; 1-way; male lock, Non-sterile
How can this be sterilised?
Answer
These can be gamma sterilized. These are not autoclavable.Answered on 3/23/2011 by Jen from Technical Support
is it screw thread interface?Can it match with the 60ml screw thread syringe?
Answer
Luer connections are standardized. Most syringes also have luer connections, regardless of the volume capacity, so the answer is most likely, yes this should connect directly.Answered on 6/4/2012 by Jen from Technical Support
is this product sterile?
Answer
No, this product is not sterile.Answered on 1/31/2011 by Jen from Technical Support
What are the dimensions for this? What size opening will it fit?
Answer
The bore is 0.115" through the stopcock. The total length is roughly 2 inches. These have standard male slip tip and female luer lock connections. Please contact our technical application specialists for additional assistance (contact information can be found in the "contact us" section on the web page).Answered on 6/23/2010 by Jen from Technical Support
what is the maximum pressure that the stopcock can resist?
Answer
ISO requires a 45 psi pressure and this unit will handle at least this amount. The unit may support higher pressures, but these units are not recommended for use above 45psi.Answered on 6/20/2012 by Jay from Customer Service
Customers Also Bought

Cole-Parmer Stopcock with Luer Connections; 1-way; male lock, Non-sterile

OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Cole-Parmer
JMG No: 1054060
Part No: 30600-00
UNSPSC: 41121815
Type: Instrument
Availability: Within 13 days
  • HDPE handle rotates 360 degrees.

Choose stopcocks with either a male luer lock or a male luer slip. Handle rotates 90deg on one-way stopcocks, 180deg on three-way stopcocks, and 360deg on four-way stopcocks. All have PC body and HDPE stem.

Connection Type-Port 1 Female luer
Connection Type-Port 2 Male luer lock
Material Polycarbonate
Number of Ports 2
Outlet port Male Luer Lock
Inlet Port Female Luer
Wetted Materials Polycarbonate
Flow pattern One-Way
Description Stopcock with Luer Connections; 1-way; male lock, Non-sterile
How can this be sterilised?
Answer
These can be gamma sterilized. These are not autoclavable.Answered on 3/23/2011 by Jen from Technical Support
is it screw thread interface?Can it match with the 60ml screw thread syringe?
Answer
Luer connections are standardized. Most syringes also have luer connections, regardless of the volume capacity, so the answer is most likely, yes this should connect directly.Answered on 6/4/2012 by Jen from Technical Support
is this product sterile?
Answer
No, this product is not sterile.Answered on 1/31/2011 by Jen from Technical Support
What are the dimensions for this? What size opening will it fit?
Answer
The bore is 0.115" through the stopcock. The total length is roughly 2 inches. These have standard male slip tip and female luer lock connections. Please contact our technical application specialists for additional assistance (contact information can be found in the "contact us" section on the web page).Answered on 6/23/2010 by Jen from Technical Support
what is the maximum pressure that the stopcock can resist?
Answer
ISO requires a 45 psi pressure and this unit will handle at least this amount. The unit may support higher pressures, but these units are not recommended for use above 45psi.Answered on 6/20/2012 by Jay from Customer Service
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Cole-Parmer
JMG No: 1054060
Part No: 30600-00
UNSPSC: 41121815
Type: Instrument
Availability: Within 13 days
  • HDPE handle rotates 360 degrees.

Choose stopcocks with either a male luer lock or a male luer slip. Handle rotates 90deg on one-way stopcocks, 180deg on three-way stopcocks, and 360deg on four-way stopcocks. All have PC body and HDPE stem.

Connection Type-Port 1 Female luer
Connection Type-Port 2 Male luer lock
Material Polycarbonate
Number of Ports 2
Outlet port Male Luer Lock
Inlet Port Female Luer
Wetted Materials Polycarbonate
Flow pattern One-Way
Description Stopcock with Luer Connections; 1-way; male lock, Non-sterile
How can this be sterilised?
Answer
These can be gamma sterilized. These are not autoclavable.Answered on 3/23/2011 by Jen from Technical Support
is it screw thread interface?Can it match with the 60ml screw thread syringe?
Answer
Luer connections are standardized. Most syringes also have luer connections, regardless of the volume capacity, so the answer is most likely, yes this should connect directly.Answered on 6/4/2012 by Jen from Technical Support
is this product sterile?
Answer
No, this product is not sterile.Answered on 1/31/2011 by Jen from Technical Support
What are the dimensions for this? What size opening will it fit?
Answer
The bore is 0.115" through the stopcock. The total length is roughly 2 inches. These have standard male slip tip and female luer lock connections. Please contact our technical application specialists for additional assistance (contact information can be found in the "contact us" section on the web page).Answered on 6/23/2010 by Jen from Technical Support
what is the maximum pressure that the stopcock can resist?
Answer
ISO requires a 45 psi pressure and this unit will handle at least this amount. The unit may support higher pressures, but these units are not recommended for use above 45psi.Answered on 6/20/2012 by Jay from Customer Service
$94 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
Customers Also Bought