$456 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: InnoCal
JMG No: 1252864
Part No: 17080-10
UNSPSC: 81141504
Type: Instrument
Availability: Within 42 days
  • All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu’s), and test uncertainty ratios (TUR’s) at no additional cost!
    This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer’s published specification
    EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications, FDA compliant
    Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays
    Testing includes measurement at 5 to 10 points—depending on the meter— equidistant across the range of the flowmeter
    Testing range  0-500 LPM air flow
  • Calibration service for a mass flowmeter
  • Testing range 0.1 to 80,000 sccm at uncertainties as low as (K=2) ±0.2% of reading
  • Testing includes measurement at five to ten points — depending on the meter — equidistant across the range of the flowmeter
  • Certificate includes measured data, graphs, and correlations (if required) to meet the most stringent quality and scientific requirements

With the variety of flowmeter types—from differential pressure to magnetic to ultrasonic—it helps to have highly trained metrologists calibrating the meters for optimal performance. At InnoCal, our computerized, automated standards allow us to perform NIST-traceable mass and correlated flow measurements using air or nitrogen gas. When correlation to other gases is needed, our metrologists will provide you with correlated data or a gas correlation table.

Typical brands that we calibrate include Cole-Parmer, Alicat, Aalborg Instruments, Gilmont, Sierra Instruments, Bios International, and many more.
All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.

Calibration Test Points 5 to 10 points—depending on the meter
Calibration Test Range 0-500 LPM air flow
Calibration Type Airflow
Description NIST-Traceable Calibration; Mass Flowmeter
Can we send in our previous purchased flow meters to be re-calibrated?
Answer
Yes, you may send in previously purchased flow meters for re-calibration. Please contact us (at the number found under the Contact Us section on our website) to obtain a Return Authorization number prior to sending the flow meter back for re-calibration.Answered on 5/5/2010 by Jaime from Technical Support
I will be purchasing a R-32907-81, 10-1000 lpm, Mass Flow Controller.Can specific test points be specified as part of the calibration? For example critical flows for my use are 170 lpm VACUUM and 250 lpm VACUUM. Can those or at least 250 lpm VACUUM be specified as a calibration parameter?
Answer
With this certificate 5-7 points equally spaced across the entire range of the unit are used. For specific points you must order this calibration along with 17100-02.Answered on 10/28/2009 by Jen from Technical Support
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: InnoCal
JMG No: 1252864
Part No: 17080-10
UNSPSC: 81141504
Type: Instrument
Availability: Within 42 days
  • All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu’s), and test uncertainty ratios (TUR’s) at no additional cost!
    This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer’s published specification
    EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications, FDA compliant
    Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays
    Testing includes measurement at 5 to 10 points—depending on the meter— equidistant across the range of the flowmeter
    Testing range  0-500 LPM air flow
  • Calibration service for a mass flowmeter
  • Testing range 0.1 to 80,000 sccm at uncertainties as low as (K=2) ±0.2% of reading
  • Testing includes measurement at five to ten points — depending on the meter — equidistant across the range of the flowmeter
  • Certificate includes measured data, graphs, and correlations (if required) to meet the most stringent quality and scientific requirements

With the variety of flowmeter types—from differential pressure to magnetic to ultrasonic—it helps to have highly trained metrologists calibrating the meters for optimal performance. At InnoCal, our computerized, automated standards allow us to perform NIST-traceable mass and correlated flow measurements using air or nitrogen gas. When correlation to other gases is needed, our metrologists will provide you with correlated data or a gas correlation table.

Typical brands that we calibrate include Cole-Parmer, Alicat, Aalborg Instruments, Gilmont, Sierra Instruments, Bios International, and many more.
All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.

Calibration Test Points 5 to 10 points—depending on the meter
Calibration Test Range 0-500 LPM air flow
Calibration Type Airflow
Description NIST-Traceable Calibration; Mass Flowmeter
Can we send in our previous purchased flow meters to be re-calibrated?
Answer
Yes, you may send in previously purchased flow meters for re-calibration. Please contact us (at the number found under the Contact Us section on our website) to obtain a Return Authorization number prior to sending the flow meter back for re-calibration.Answered on 5/5/2010 by Jaime from Technical Support
I will be purchasing a R-32907-81, 10-1000 lpm, Mass Flow Controller.Can specific test points be specified as part of the calibration? For example critical flows for my use are 170 lpm VACUUM and 250 lpm VACUUM. Can those or at least 250 lpm VACUUM be specified as a calibration parameter?
Answer
With this certificate 5-7 points equally spaced across the entire range of the unit are used. For specific points you must order this calibration along with 17100-02.Answered on 10/28/2009 by Jen from Technical Support
Customers Also Bought
JMG Part No. 1062273
Related Products
JMG Part No. 1252891

InnoCal NIST-Traceable Calibration; Mass Flowmeter

OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: InnoCal
JMG No: 1252864
Part No: 17080-10
UNSPSC: 81141504
Type: Instrument
Availability: Within 42 days
  • All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu’s), and test uncertainty ratios (TUR’s) at no additional cost!
    This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer’s published specification
    EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications, FDA compliant
    Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays
    Testing includes measurement at 5 to 10 points—depending on the meter— equidistant across the range of the flowmeter
    Testing range  0-500 LPM air flow
  • Calibration service for a mass flowmeter
  • Testing range 0.1 to 80,000 sccm at uncertainties as low as (K=2) ±0.2% of reading
  • Testing includes measurement at five to ten points — depending on the meter — equidistant across the range of the flowmeter
  • Certificate includes measured data, graphs, and correlations (if required) to meet the most stringent quality and scientific requirements

With the variety of flowmeter types—from differential pressure to magnetic to ultrasonic—it helps to have highly trained metrologists calibrating the meters for optimal performance. At InnoCal, our computerized, automated standards allow us to perform NIST-traceable mass and correlated flow measurements using air or nitrogen gas. When correlation to other gases is needed, our metrologists will provide you with correlated data or a gas correlation table.

Typical brands that we calibrate include Cole-Parmer, Alicat, Aalborg Instruments, Gilmont, Sierra Instruments, Bios International, and many more.
All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.

Calibration Test Points 5 to 10 points—depending on the meter
Calibration Test Range 0-500 LPM air flow
Calibration Type Airflow
Description NIST-Traceable Calibration; Mass Flowmeter
Can we send in our previous purchased flow meters to be re-calibrated?
Answer
Yes, you may send in previously purchased flow meters for re-calibration. Please contact us (at the number found under the Contact Us section on our website) to obtain a Return Authorization number prior to sending the flow meter back for re-calibration.Answered on 5/5/2010 by Jaime from Technical Support
I will be purchasing a R-32907-81, 10-1000 lpm, Mass Flow Controller.Can specific test points be specified as part of the calibration? For example critical flows for my use are 170 lpm VACUUM and 250 lpm VACUUM. Can those or at least 250 lpm VACUUM be specified as a calibration parameter?
Answer
With this certificate 5-7 points equally spaced across the entire range of the unit are used. For specific points you must order this calibration along with 17100-02.Answered on 10/28/2009 by Jen from Technical Support
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: InnoCal
JMG No: 1252864
Part No: 17080-10
UNSPSC: 81141504
Type: Instrument
Availability: Within 42 days
  • All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu’s), and test uncertainty ratios (TUR’s) at no additional cost!
    This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer’s published specification
    EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications, FDA compliant
    Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays
    Testing includes measurement at 5 to 10 points—depending on the meter— equidistant across the range of the flowmeter
    Testing range  0-500 LPM air flow
  • Calibration service for a mass flowmeter
  • Testing range 0.1 to 80,000 sccm at uncertainties as low as (K=2) ±0.2% of reading
  • Testing includes measurement at five to ten points — depending on the meter — equidistant across the range of the flowmeter
  • Certificate includes measured data, graphs, and correlations (if required) to meet the most stringent quality and scientific requirements

With the variety of flowmeter types—from differential pressure to magnetic to ultrasonic—it helps to have highly trained metrologists calibrating the meters for optimal performance. At InnoCal, our computerized, automated standards allow us to perform NIST-traceable mass and correlated flow measurements using air or nitrogen gas. When correlation to other gases is needed, our metrologists will provide you with correlated data or a gas correlation table.

Typical brands that we calibrate include Cole-Parmer, Alicat, Aalborg Instruments, Gilmont, Sierra Instruments, Bios International, and many more.
All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.

Calibration Test Points 5 to 10 points—depending on the meter
Calibration Test Range 0-500 LPM air flow
Calibration Type Airflow
Description NIST-Traceable Calibration; Mass Flowmeter
Can we send in our previous purchased flow meters to be re-calibrated?
Answer
Yes, you may send in previously purchased flow meters for re-calibration. Please contact us (at the number found under the Contact Us section on our website) to obtain a Return Authorization number prior to sending the flow meter back for re-calibration.Answered on 5/5/2010 by Jaime from Technical Support
I will be purchasing a R-32907-81, 10-1000 lpm, Mass Flow Controller.Can specific test points be specified as part of the calibration? For example critical flows for my use are 170 lpm VACUUM and 250 lpm VACUUM. Can those or at least 250 lpm VACUUM be specified as a calibration parameter?
Answer
With this certificate 5-7 points equally spaced across the entire range of the unit are used. For specific points you must order this calibration along with 17100-02.Answered on 10/28/2009 by Jen from Technical Support
$456 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
Customers Also Bought
JMG Part No. 1062273
Related Products
JMG Part No. 1252891