$4258 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Masterflex
JMG No: 1015291
Part No: 07589-30
UNSPSC: 41105102
Type: Instrument
Availability: Within 17 days
  • Flow rate: 0.6 to 13 LPM (0.2 to 3.5 GPM); flow rate depends on tubing size.
  • Vary motor speed by using a regulator to adjust air pressure. Drive includes regulator with 5-µm air filter and 1/4'' NPT(F) connection, automatic lubricator, 0 to 100 psi pressure gauge, and muffler.
  • The 3/4-hp air motor starts smooth, runs cool, and requires little maintenance. Air motor generates less heat than an electric motor.
  • Painted steel housing; IP34 rated. Protects from water spray.
  • Drive meets EU machine directive requirements for CE compliance. Drive conforms to design/manufacturing standards of the European community.
  • Connect to your existing air supply or compressor. Air hose and compressor are not included.
  • Drive accepts two different pump head types: I/P Standard or I/P EASY-LOAD.

Use this variable-speed air-powered drive when electrical power may be unsafe or impractical. For safe operation, carefully ground to protect from static electricity.

Control type Analog Variable Speed
Housing Material Painted Steel
Motor hp 3/4
Open-Head Sensor No
Reversible motor No
Speed Variable
Speed Control ±10%
Type of Pump heads accepted Standard, Easy-Load, High-Performance
Description I/P variable-speed air-powered drive.
Drive Height (InchShort) 9
Max flow rate (LPM) 17
Min RPM (rpm) 100
No. of Pump heads accepted 2
Drive Height (mm) 229
Drive Length (mm) 282
Drive Width (InchShort) 8.5
Max Flow Rate (mLmin) 17000
Drive IP rating IP 34
Max RPM (rpm) 650
Min flow rate (LPM) 0.6
Pump Series I/P
Drive Length (InchShort) 11.125
Drive Width (mm) 216
Min Flow Rate (mLmin) 600
Motor (watts) 560
Is it possible to use this to pump chemicals through a filter cartridge? Would the excessive pressure be detrimental to the pump?
Answer
The maximum pressure would be determined on the tubing used. Tubes that are compatible with this pump will withstand up to a max of 40 psi depending on tube size.Answered on 2/28/2014 by Polo from Technical Support
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Masterflex
JMG No: 1015291
Part No: 07589-30
UNSPSC: 41105102
Type: Instrument
Availability: Within 17 days
  • Flow rate: 0.6 to 13 LPM (0.2 to 3.5 GPM); flow rate depends on tubing size.
  • Vary motor speed by using a regulator to adjust air pressure. Drive includes regulator with 5-µm air filter and 1/4'' NPT(F) connection, automatic lubricator, 0 to 100 psi pressure gauge, and muffler.
  • The 3/4-hp air motor starts smooth, runs cool, and requires little maintenance. Air motor generates less heat than an electric motor.
  • Painted steel housing; IP34 rated. Protects from water spray.
  • Drive meets EU machine directive requirements for CE compliance. Drive conforms to design/manufacturing standards of the European community.
  • Connect to your existing air supply or compressor. Air hose and compressor are not included.
  • Drive accepts two different pump head types: I/P Standard or I/P EASY-LOAD.

Use this variable-speed air-powered drive when electrical power may be unsafe or impractical. For safe operation, carefully ground to protect from static electricity.

Control type Analog Variable Speed
Housing Material Painted Steel
Motor hp 3/4
Open-Head Sensor No
Reversible motor No
Speed Variable
Speed Control ±10%
Type of Pump heads accepted Standard, Easy-Load, High-Performance
Description I/P variable-speed air-powered drive.
Drive Height (InchShort) 9
Max flow rate (LPM) 17
Min RPM (rpm) 100
No. of Pump heads accepted 2
Drive Height (mm) 229
Drive Length (mm) 282
Drive Width (InchShort) 8.5
Max Flow Rate (mLmin) 17000
Drive IP rating IP 34
Max RPM (rpm) 650
Min flow rate (LPM) 0.6
Pump Series I/P
Drive Length (InchShort) 11.125
Drive Width (mm) 216
Min Flow Rate (mLmin) 600
Motor (watts) 560
Is it possible to use this to pump chemicals through a filter cartridge? Would the excessive pressure be detrimental to the pump?
Answer
The maximum pressure would be determined on the tubing used. Tubes that are compatible with this pump will withstand up to a max of 40 psi depending on tube size.Answered on 2/28/2014 by Polo from Technical Support
Customers Also Bought
JMG Part No. 1109640
JMG Part No. 1011831

Masterflex I/P variable-speed air-powered drive.

OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Masterflex
JMG No: 1015291
Part No: 07589-30
UNSPSC: 41105102
Type: Instrument
Availability: Within 17 days
  • Flow rate: 0.6 to 13 LPM (0.2 to 3.5 GPM); flow rate depends on tubing size.
  • Vary motor speed by using a regulator to adjust air pressure. Drive includes regulator with 5-µm air filter and 1/4'' NPT(F) connection, automatic lubricator, 0 to 100 psi pressure gauge, and muffler.
  • The 3/4-hp air motor starts smooth, runs cool, and requires little maintenance. Air motor generates less heat than an electric motor.
  • Painted steel housing; IP34 rated. Protects from water spray.
  • Drive meets EU machine directive requirements for CE compliance. Drive conforms to design/manufacturing standards of the European community.
  • Connect to your existing air supply or compressor. Air hose and compressor are not included.
  • Drive accepts two different pump head types: I/P Standard or I/P EASY-LOAD.

Use this variable-speed air-powered drive when electrical power may be unsafe or impractical. For safe operation, carefully ground to protect from static electricity.

Control type Analog Variable Speed
Housing Material Painted Steel
Motor hp 3/4
Open-Head Sensor No
Reversible motor No
Speed Variable
Speed Control ±10%
Type of Pump heads accepted Standard, Easy-Load, High-Performance
Description I/P variable-speed air-powered drive.
Drive Height (InchShort) 9
Max flow rate (LPM) 17
Min RPM (rpm) 100
No. of Pump heads accepted 2
Drive Height (mm) 229
Drive Length (mm) 282
Drive Width (InchShort) 8.5
Max Flow Rate (mLmin) 17000
Drive IP rating IP 34
Max RPM (rpm) 650
Min flow rate (LPM) 0.6
Pump Series I/P
Drive Length (InchShort) 11.125
Drive Width (mm) 216
Min Flow Rate (mLmin) 600
Motor (watts) 560
Is it possible to use this to pump chemicals through a filter cartridge? Would the excessive pressure be detrimental to the pump?
Answer
The maximum pressure would be determined on the tubing used. Tubes that are compatible with this pump will withstand up to a max of 40 psi depending on tube size.Answered on 2/28/2014 by Polo from Technical Support
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Masterflex
JMG No: 1015291
Part No: 07589-30
UNSPSC: 41105102
Type: Instrument
Availability: Within 17 days
  • Flow rate: 0.6 to 13 LPM (0.2 to 3.5 GPM); flow rate depends on tubing size.
  • Vary motor speed by using a regulator to adjust air pressure. Drive includes regulator with 5-µm air filter and 1/4'' NPT(F) connection, automatic lubricator, 0 to 100 psi pressure gauge, and muffler.
  • The 3/4-hp air motor starts smooth, runs cool, and requires little maintenance. Air motor generates less heat than an electric motor.
  • Painted steel housing; IP34 rated. Protects from water spray.
  • Drive meets EU machine directive requirements for CE compliance. Drive conforms to design/manufacturing standards of the European community.
  • Connect to your existing air supply or compressor. Air hose and compressor are not included.
  • Drive accepts two different pump head types: I/P Standard or I/P EASY-LOAD.

Use this variable-speed air-powered drive when electrical power may be unsafe or impractical. For safe operation, carefully ground to protect from static electricity.

Control type Analog Variable Speed
Housing Material Painted Steel
Motor hp 3/4
Open-Head Sensor No
Reversible motor No
Speed Variable
Speed Control ±10%
Type of Pump heads accepted Standard, Easy-Load, High-Performance
Description I/P variable-speed air-powered drive.
Drive Height (InchShort) 9
Max flow rate (LPM) 17
Min RPM (rpm) 100
No. of Pump heads accepted 2
Drive Height (mm) 229
Drive Length (mm) 282
Drive Width (InchShort) 8.5
Max Flow Rate (mLmin) 17000
Drive IP rating IP 34
Max RPM (rpm) 650
Min flow rate (LPM) 0.6
Pump Series I/P
Drive Length (InchShort) 11.125
Drive Width (mm) 216
Min Flow Rate (mLmin) 600
Motor (watts) 560
Is it possible to use this to pump chemicals through a filter cartridge? Would the excessive pressure be detrimental to the pump?
Answer
The maximum pressure would be determined on the tubing used. Tubes that are compatible with this pump will withstand up to a max of 40 psi depending on tube size.Answered on 2/28/2014 by Polo from Technical Support
$4258 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
Customers Also Bought
JMG Part No. 1109640
JMG Part No. 1011831